Hello ELBOX Is the A1200 PCMCIA FLASH device still going to be released? It was supposed to have been available August 2003 I believe, but I have not seen...
... And what if it comes. You have to wait for the OS4 first to come anyway. You cant use it for anything else i believe. -- ... *TRANSPLANT & EMULATE - LIVE &...
Hello Krister The reply below you sent to me I presume you are referring to the SHARK card & if that is the case I obviously know that the card cannot be used...
Hi all. Just managed to get a Voodoo 5500 and put it in my Mediator 1200. After some fiddling (forgot to plug the power cable in ;) ) it is now recognised in...
Lee McCormick
leem@...
Apr 14, 2004 3:29 pm
17005
Hiya Lee ... Supply the group some more information on your hardware setup please (such as Accelertor card and any other hardware that you have installed). I...
Hi Sam, Sorry about forgetting the info. It's an A1200 in an Infintiv. My accelerator is currently an Apollo 1240 @ 50MHz. Also in the mediator 1200 is a...
Lee McCormick
leem@...
Apr 15, 2004 3:18 pm
17007
Hiya again Lee (please don't top-post your emails) ... No probs, just think of the rest of the group, always try to provide as much information as you can to...
Hi Again, ... Thanks for all your help. I did try removing the soundblaster card to see if you were right and it was something really strange like that. I...
Lee McCormick
leem@...
Apr 20, 2004 4:47 pm
17009
... You can use the version from the AOS 3.9 CD. You can also check here for the latest version: http://www.vgr.com/picasso/ CGFX can't be used with the...
Hello all, When I try to run Payback with me voodoo3 it runs incredibly slow and gives some gfx corruption. I am having to use the version of warp3d that came...
You have to use the warp3d that elbox sends out. The one from the downloa site to update snt compatable. Email elbox and ask for the update. Payback runs well...
Hello, At first i want to konw i use a CDMA mobile phone to connect to the internet. I use the serial cable for this and is at 115200 Bps with serial.device or...
Well everyone, I just wanted to thank all of you for all the support I have received over the years on this list. My A300 was a lot of fun, and the Mediator...
... A vise decition. Why wait when you can get a good system that works faaaaast. I bought an A1 and wait for the OS4developer as im tired of waiting for the...
Okay all you smart folks, I've got a Voodoo3 running fine. I've tried a Voodoo4, but have a problem. Starting the Voodoo icon activates the Voodoo4 display ...
... I'm sorry to tell you that I've got a Voodoo 4 right off. I just plugged it in and it worked with P96. I had a Voodoo 3 and I just followed the same...
... I used to have a Voodoo 4 and found that there are compatability problems depending on which accelerator you are using. I had a Blizzard 040/40. If I...
... On the A4000-version of Mediator you need to change some jumpers for the memory-settings. Don't know how it works on the A1200-version though. Regards...
Hello alll, I have a Sounblaster Vibra with CT2518 Chipset ,but on the board is printed CT4810 "This is confused me" and Mediator is detected Ensoniq...
Thanks for the replies. I tried two good Voodoo4 cards in two different systems (Mirage 4000 and also Mediator A4000T) that work fine with the Voodoo3 3000....
Hello, I know there is a list of ethernet cards in the elbox site for compatibility with mediator. I could see sometime mails with problems with 100 mb...
... There is only cards for realtek. Too bad there arent driver for others like 3com. I hear some pcusers has also problems with realtek cards. ... Regards -- ...
hello, ... finally, the goal is to buy ethernet card with rt 8139 a,b,c,d chip. how is it possible to do that -all ethernet card are 8139 one ?? -if not, need...
I have not had any problems using 10Mb or 100Mb Realtek cards on Windows, Unix, or Amiga. They have also lasted longer than many 3com cards that have...
... No, not all Ethernet-cards are 8139. But Realtek has a chip that is called 8139. Any card that has this chip should theoreticly work well with Mediator (so...
Mikael Burman
mikael.burman@...
Apr 29, 2004 6:38 pm
17027
Hello Lars ... I have no lockups. My problem is that miamidx closes the connection after one hour due to it cant reneawe the lease of IP. I have DHCP for IP. I...
The DHCP renewal failure is between certain DHCP servers and Miami. I suspect it is an incompatibility with one of the protocols used in many ADSL/Cable...
... There is a known problem with old Linksys and Netgear Cable/DSL routers and DHCP renew as far as I have been able to tell there is no solution from either...
... This also depends on the TCP/IP-stack used. I tried MiamiDx and Genesis connected with a PC. Using FTP I got a transfer rate of 400kB/s using MiamiDx and...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
