Try the following,

   user id : dadmin
   pswd : dadmin01

   else call avaya to reset the admin password.They have the access to do so....




azher_bashirahmad azher <azherbashirahmad@...> wrote:
           Dear all
I have G350 with S8300 and i lose the password pls any one help me find out the
way with out mastering the server recover the password

thanks

Regards

Azher Bashir
Avaya support
pakistan

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]






Loks

  __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]

wats happening if u dials 20010?

rtabonita <roger.abonita@...> wrote:          Hi,

Am having problems with my voicemail, the termination is correct
(20011, 20012, 20013 & 20014) but when i dialed the 20010 voicemail
hunt, there the problem goes...

can you enlighten me regarding this.

thanks.

Roger
801.304.6562






Loks

  __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]

Dear all
   I have G350 with S8300 and i lose the password pls any one help me find out
the way with out mastering the server recover the password

   thanks

   Regards

   Azher Bashir
   Avaya support
   pakistan

  __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]

Maybe some one can help me wit this issue. I have an IP office and I
need the out bound ANI to shoe an 800 number instead of the local
number. Can any on help?

Thanks

Company Name: Network Innovations Inc. (Main Office - Canada)
Website: www.networkinv.com

     Our company provide data/voice network solution and satellite
communication services to US Army and NATO/ISAF. Currently, there's
just two Filipinos working for the company (including me). Im looking
for more Filipinos to get in our team. So far, we're waiting for the
15 Filipino's who'll do the Outside Plant Cabling.
So the more Filipinos, the better.

Required Candidate

- Filipino, Male, 23-32 yo
- must have at least 1-3 years experience of implementation of Avaya
VoIP Network. VoIP network design is a plus
- Ability to integrate to Cisco network is a plus.

Package

- Starting salary of $2700 - $3000 (US) per month, tax free.
Probation perion is only 2-3 months.
- Free food, transportation and accomodation(owned room)
- Paid 2 months vacation, airline ticket shouldered by the company.
- Bonus(es) depends on performance (the more you work, the more you
have credit and recognition)


Please submit your resume asap and we'll fly you in.
brian.monteverde@...
brian.monteverde@...

Bilisan mga Kababayan.

Regards,
Brian Monteverde
IT Field Manager
Cisco Team Leader

I am interested if anyine has configured a long distance trunk group to
use the incoming Tone )DTMF) ANI feature. My carrier states that they
are transmitting inbound information in the *ani*dnis* format however
when I configure my trunk group to this configuration, calls are no
longer able to land on the trunk group, calls receive a fast busy.

I am attempting to capture the inbound ANI of a call and use a vector
routing table to send calls to the proper group. I have been successful
in getting this to work for an ISDN trunk group but not a long distance
tie group.

Hi,

Am having problems with my voicemail, the termination is correct
(20011, 20012, 20013 & 20014) but when i dialed the 20010 voicemail
hunt, there the problem goes...

can you enlighten me regarding this.

thanks.

Roger
801.304.6562

I'm trying to hook these 2 PBX's together via and IP trunk running
across and existing DS-3 circuit. I'm trying to do this with out a
gateway. I want to try strict IP to IP trunking. Does anyone here have
any suggestions?

Thanks,

Charlie

Hi All, I wonder if someone can assist me. We have an AVP that is
connected via h.323 to the CM. Everything works fine except the blind
transfer. Whenever i do a transfer the ACD keeps hold of the port and
my port in AVP stays in Alerting state. How do i get the ACD to release
this port and complete the blinde transfer? When i do a trace, this is
what i get: "denial event 1746: Conf/xfer a Vector call D1=0x8a83
D2=0x287f" Please help

This presentation is part of the SIP-VoIP Essentials online course
available from NACSE at http://www.nacse.com or the version for
Channel Partners called NVBE or also onsite.  Please email Tom Cross
cross@... for more details on all delivery and customizing
options.

This is an introduction to SIP Trunking and connections for
telephones and discussion of SIP telephony network with respect to
the PSTN-Public Switched Telephone Network via SS7-Signaling System
7.  This tutorial will present the various SS7 protocols used in PSTN
signaling from a SIP phone.  Later, other call processing scenarios
will be presented.  The following are the steps in the SIP signaling
process to complete a call via the PSTN-Public Switched Telephone
Network.  There are others but this is a start.  First, the SIP
device sends an INVITE.

The GMC-Gateway Media Controller converts IP-Internet Protocol
packets to CAS-Channel Associated Signaling TDM-Time Division
Multiplexed channels signaling and media transmission with the PSTN.

A Q.931-SS7-ISUP-ISDN-Integrated Services Digital Network User Part
IAM-Initial Address Message is sent with the Routing label, CIC-
Circuit Identification Code and Message Type Code. Examples of
Message Type Codes include: Called Number, Calling Number, DPC-
Destination Point Code, OPC-Origination Point Code.   As the IAM
passes through switching centers circuits (shown in green) are
reserved.

Once the IAM-Initial Address Message is processed at the DPC-
Destination Point Code (switch), an SS7-ISUP ACM-Address Complete
Message is sent to the OPC-Origination Point Code (switch).   The ACM
is used also used to indicate the start of billing.

Upon off-hook connect, the reserved trunks are activated and an ANM-
ANswer Message completes the call setup/connect and communication
(conversation) begins.

RTP-Realtime Transport Protocol or SRTC-Secure RTP (encrypted media)
is the Session Layer protocol used for the voice transmission with
UDP-User Datagram Protocol and then IP for transmission.

During the call, various Call Progress messages such as CPG-Call
ProGress Message, COT-COTinuity Message, SUS-SUSpend Message, RES-
RESume Message, FOT-FOrward message Transfer, INR-INformation Request
message, INF-INFormation Message and others may be sent.

Upon RELease or disconnect (on-hook), a series of SS7-ISUP messages
are sent to teardown (release) the trunks, terminate billing, and
provide network management and testing for the next call.

Don't know what type of system but on my G3si I believe it would be the
setting on the station to auto select idle appearance.

--- In Avaya_Forum@yahoogroups.com, "seven4t8" <seven4t8@...> wrote:
>
> Hi, I just want to press 9 to get out and dial instead of having to
> press a line apperance first.  What do I need to do to change this?
>

I'v a problem and need sm help:
am setting an S8300-G700 in NY remotely and I'v a problem in the PRI
trunk, can u send me the parameters of PRI in the states or send me
screenshots of a working PRI config? Pleeeez

--- In Avaya_Forum@yahoogroups.com, "seven4t8" <seven4t8@...> wrote:
>
> Hi, I just want to press 9 to get out and dial instead of having to
> press a line apperance first.  What do I need to do to change this?
>
Just build a short code using 9 to dial out.

--- In Avaya_Forum@yahoogroups.com, "seven4t8" <seven4t8@...> wrote:
>
> Hi, I just want to press 9 to get out and dial instead of having to
> press a line apperance first.  What do I need to do to change this?
>


I think you need to enter "dac" next to number 9 in the ars table. You
access ars table by typing "change ars analysis 1". By doing that,a
trunk is seized, and you then dial the external number.
jake

Hi, I just want to press 9 to get out and dial instead of having to
press a line apperance first.  What do I need to do to change this?

Hi,

Am experiencing a Platform Alarm in the system i.e., PLAT-ALM a minor
alarm and a warning Alarm AESV-SES, would like to ask if someone
encountered this alarm and ive checked the I&M manual and the alarm
just came back after i cleared the said alarm.

Thanks.

Roger
(801)304.6563 (US)
(+632) 756.8562 (Philippines)

Hi,

Am experiencing a Platform Alarm in the system i.e., PLAT-ALM a minor
alarm and a warning Alarm AESV-SES, would like to ask if someone
encountered this alarm and ive checked the I&M manual and the alarm
just came back after i cleared the said alarm.

Thanks.

Roger
roger.abonita@...

I'm stumped. I want to place a call from within Outlook Contacts
using
the native dialer on our 2420/4620 telephones. I get the following
message. "One of the components of the telephoney device drive is
missing, use Windows Control Panel to set up the driver properly."
We have an S8700, IP Connect backend and are a full Microsoft shop.

Interestingly, our current configuration works when we use IP
Softphone. We can place a call from our contacts (right-click and
select "place a call"). Also from within Office Communicator 2005
(we've done the integration to Avaya) we're able to place a call to
a contract listed in Outlook by typing the name in the "Find" field.

Suggestions? Is it as simple as Avaya having a driver which allows
this functionality to work from my computer and deskphone? I
understand I'm looking for something (a program, or a driver)to do
the
translation from Microsoft's TAPI to Avaya's TCAPI.

Thanks much.

Carol

Any on have a form for a G3 inventor?

--- In Avaya_Forum@yahoogroups.com, "lexcruz2002" <lexucruz@...> wrote:
>
> For those of you who work on Avaya equipment, we have a user group
> called the "Greater Phila Avaya Users Group" aka gpaug.  If you are
> interested in being a member, visit us at
> http://groups.yahoo.com/group/gpaug/
>
> We meet every 2 month with seminars on Avaya topics.
> VP of GPAUG
>

Hello friends,

I use AVAYA IP OFFICE 406, to connect my office,
I want to develope third party application for the IP office 406,
which will handle the my calls.

Is there any simulator or programming tool for the IP office 406?

i am confused, when i search on the net for th simulator, i get the
only results of IP office 3.1 .
Is this software is used for the programming development?

If any body knows Please help me..

Thanks in Advance..

Bye,
Thanks,
Mahadeo.

i am looking for nortel exams from certmagic.com . anyone got
certmagic guides for these exams ?? . Please share it with me

I know there were/are some one-way talk path issues with older MEDPRO
firmware on Communication Manager 2.X and older that could be avoided by
turning off ip-ip direct (and possibly hairpinning) for the associated
network regions.

Call or reply if you have any questions.

Thanks

-------------------------------------------------------------
Brian Clark
OUS Operating System/Network Analyst


________________________________

From: Avaya_Forum@yahoogroups.com [mailto:Avaya_Forum@yahoogroups.com]
On Behalf Of kentcoisd
Sent: Friday, November 10, 2006 3:02 PM
To: Avaya_Forum@yahoogroups.com
Subject: [Avaya_Forum] VoIP line Hold Issue



Has anyone seen this?

I have 6 sites in an MPLS routed configuration and ONLY when we call
between sites internally and one end puts the call on HOLD or PARK and
they pick it back up, they can't hear the other end; however, the
called party can hear everything fine.

This is being consistent accross the board?? Any suggestions?






[Non-text portions of this message have been removed]

Man, don't know how he got through, but he was posting spam for
everyone I blocked!

He's gone now.

We are looking for some moderators to help sift through the spam we
get on a daily basis.

If you are interested and have been here a while please shoot me an
email to let me know your interest.

Thanks guys!

I have a Avaya Definity PBX with a Cajun P580 core swith, using the
Avaya 46 series IP phones. I am getting errors on certain IP phones
that say "error" registering # to reset.

1- I know the phone is getting an IP address from the DHCP server.
2- It kind of floats around the 100+ extensions I have.
3- 3 or 4 extensions are effected weekly.
4- I have changed phone hardware and keep experiencing same problem.
5- We have recently replaced blades 1&4 in the Cajun P580.

Any help you can give me would be appreciated. Thanks

You have to save as well after relabelling... are u doing that ?

tomasol02 <tomasol02@...> wrote:          Does anyone know if you can
relabel expansion module buttons?

The "Relabel Feature Buttons" in the options menu does not seem to
work.

Phone type is 4620.

Thanks






Best Regards,

Asif Shabbir
   AVAYA Certified Associate

   Any one can give up.
   It's the easiest thing in the world to do.
   But to hold it together,
   when everything seems like falling apart;
   That's true strength.



---------------------------------
Sponsored Link

Talk more and pay less. Vonage can save you up to $300 a year on your phone
bill. Sign up now.

[Non-text portions of this message have been removed]

Can we get rid of the guy that keeps dumping spam on this site.  I had
to turn off email access because I was tired of receiving the stupid
spam that this jerk is sending.  We should police this site and keep
these idiots off of here.  I thought this was a PBX support site.

Mike Iannucci

Has anyone seen this?

I have 6 sites in an MPLS routed configuration and ONLY when we call
between sites internally and one end puts the call on HOLD or PARK and
they pick it back up, they can't hear the other end; however, the
called party can hear everything fine.

This is being consistent accross the board??  Any suggestions?

You can - you don't press the button on the XM24 - it shows up on another screen
on the 4620.  Good luck.


   ----- Original Message -----
   From: tomasol02
   To: Avaya_Forum@yahoogroups.com
   Sent: 10/30/2006 8:39 AM
   Subject: [Avaya_Forum] re labelling xm24 buttons


   Does anyone know if you can relabel expansion module buttons?

   The "Relabel Feature Buttons" in the options menu does not seem to
   work.

   Phone type is 4620.

   Thanks





[Non-text portions of this message have been removed]

Does anyone know if you can relabel expansion module buttons?

The "Relabel Feature Buttons" in the options menu does not seem to
work.

Phone type is 4620.

Thanks