The "Sebcar" is a working over unity battery charger and re-
energizer. The main battery remains viable during the recharge of
secondary battery. The secondary battery is recharged to functional
battery power levels. The main battery continually recharges during
charging of second battery and also after second battery is removed.
Example: Unloaded main battery voltage start 11.15 volts. Ni-cad
second charging battery unloaded 10.26. Batteries place on circuit.
Main battery voltage drops 10.30 volts. Second charge battery is at
11.00 volts. Main battery voltage after one minute\even less than a
minute will will start to rise .1 volts every 2.5 seconds. The second
battery will remain at previous levels charging up to that circuit
level. Once the second battery reaches it full saturation levels the
main battery will also reach it full saturation levels per the
circuit design. The recharge is quicker than using wall wart charger.
Ni-cad four hours old way. Two hours, even one hour the Ni-cad have a
sufficient levels. Leave the batteries on circuit for longer hours
the Main battery saturation levels remain the same as the second
batteries. Once the charging cycle is over. The main battery will
continue to climb to an even higher voltage levels. Another Ni-cad
battery is immediately place after removal of previous charged
battery and the cycle continues. Three battery packs one right after
another. Batteries are used to power RC cars until they no longer
allow vehicle functions. Batteries recharge through another cycle. I
have gone through six three pack cycle charges. I have removed the
main battery source and tested them using old RC car engine and car
12 volt lightbulb and can tell by sight and sound that they are still
extremely viable for more charges. Several Weeks with same main
battery source and charge battery packs. Repeated recharging of
battery packs-discharging battery packs while having fun, using same
battery source, week after week. Circuit design is simple, it works.
Over unity achieved using circuit with batteries. The energy produce
is evident in the battery pack repeated recharges, Source is the same
main batteries at start of recharge cycles, main battery is still
viable for more charges. Prior to the "SEBCAR", the main battery
source would only be good for a one cycle charge of Ni-cad batteries,
usually even just on battery pack. They would have just enough charge
left to use for limited recharge of AA batteries. Step by step
instructions have been posted. In the posting, information is given
in how to achieve over unity. Information is applicable to other over
unity motors, devices, etc. In building the "SEBCAR", I have
discovered the missing links, secrets, and have demystified over
unity as is known to all people who have been trying to build the
same devices. Yes, even the BEDINI SG MOTOR. Once the "SEBCAR" is
replicated, the information gained will cross-channel to other
devices and soon will be heard from many "I've done it!", just as I
am saying it now. Gateway has been opened, the path traveled, waiting
for others to travel same path. MCharley