Hi Joe, Line 1 " As the coil discharges it triggers the transistor so it is always after top dead center. The only way to get before top dead center is to use...
Hi DMR, ... I was refering to item "B", but lets break it down and look at item "A" too. 1. Magnet comes close to stator, before TDC, this gives us a (-)...
Hi Joe, John was mixing contexts... thats all. His quote: " As the coil discharges it triggers the transistor so it is always after top dead center. The only...
Hi Gene, ... Talking about: "The only way to get before top dead center is to use a hall device or optical, then you have a normal motor but open loop, it will...
Hi Jack and all, I'm going to have to get my Eric Dollard video tape back out and watch it again. My thoughts are that capacitance and inductance at resonance...
Hi DMR, ... I see how "a" can be correct, See Lee's last two posts in SG2. He explained it. Here a link from Lee's post that has an explanation of the SS...
Hello Gene, ... Did the current stay the same with the 32 volts and 50 volts? Here are a few pics of Air Core Coils I just found from my 2002 ACG testing days....
... Hi Joe and All, Time to put this one to bed I think. If John designed the SSG,s coil operation as repelling the north magnet when energized. Why would he ...
Hi Lee, ... I think so... ... Exactly right! ... We were not talking about another device or patent. To refresh our minds of the context, see the original...
Hi Joe, The current can be tuned but yes the setup was left as it was configured with only the stator and core rods being swapped out. So the current draw was...
Hi Gene, Interesting....What is the resistance of each 2.5" and 3.25" coil? I need to get an LCR meter soon... Thanks, Joe ... configured with only the stator...
Hi Joe, I don't recall the smaller one offhand but I measured the big coil and its at approx 2.7ohms per wire, with three wires, but two are in parallel for...
OK GUYS here is one to roll over in your heads--In teslas writings and on the Krone page are referells to when the capacitence values exceed the the inductence...
Lee I dont think anyone has a right to question JBs info and what he has said is what he has done.--jw ... Hi Joe and All, Time to put this one to bed I...
How about when the two bifilar windings are in series. According to Tesla this increases the C by 250K times. DMR ... and on the Krone page are referells to...
Hi Guys, Sorryu to be lazy, but has anyone compile a list of the measurements and maths relating to what we see on the scope. It would be very appreciated. ...
Please pick to bits, think about it, tell me what you agree with / disagree with, or bits to be added or deleted. I'm now trying to get my head around scalar...
In my almost 2 years having built these things I've yet to see the ringing pulse as its charging the battery. Can someone on this group outline the correct...
Hello Gene:On my units I have used about 2usec per div on sweep speed of course the volts per div varies as your sig.I put the ground lead on batt neg and the...
Jack, Lee, If we were to go back and look at all those posts again, we would find that I was not really questioning "JB's" info. Let's get the story...
Hi Jack, Thanks for the info on how you pulled the ringing pulse. Can you tell me what V/div you were using to see it? I have to be in the mV range to see...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
