Ok nobody wants it maybe or I'm too far, but I'd like to get rid of the stuff Im not using before the winter and free up the shed space. So, time to repost and...
The problem is, your prices are too high. I live in central CT and was thought about it. I just bought 2 - 55 gallon drums from a supplier for $300.00...
We always plug in the block heater (standard issue with most diesel engines, comes off the front driver side of the block) and the fuel pump is clearly very...
Good price on the totes though. If I were anywhere near you, I'd take those. ... -- "There comes a time when a free people must stop drawing lines in the sand ...
Throw in the KOH and I will take them both. ________________________________ From: etrusc0 <mfranzese@...> To: Biodiesel@yahoogroups.com Sent: Sunday,...
Rick did your price for Methanol just come down? I have not seen any price reductions. Last time tried to increase our price. We payed $130/drum. Just about to...
Mfranzese - We'll take everything but the KOH and the conebottom stand. 150.00 for the MeOH tanks, totes, etc. -- Aufbau Laboratories, LLC 118 Division Avenue...
Just got a call from a friend of mine, he said he has been having problems with lack of power in his Sprinter using bio.Any ides? Using about 40 to 50 percent....
The earlier Sprinter, 2004(?) had a problem with some hose that would break off causing a great loss of power. I am not sure exactly where it is but the...
Yes, the boost hose on our sprinter between the turbo and the intake has broke, cracked, and or needed repair several times also. I'm pretty sure our mechanic...
Use a heat exchanger, the type you find in boilers and a small see through plastic baldwin inline filter before and after the heat exhcanger, takes aboout ten...
I need updated. I have been out of the loop for a while and it's time to catch up. In the process someone was using DC Voltage to extract the glycerin . How...
DC? I'm distilling with a 1000W 120VAC band heater on a steel drum, but it's to get the MeOH out. Distilling glycerin requires temperatures upwards of 300C and...
Tom, I think you are referring to using high voltage DC with very low amperage to speed the dropout of the glycerin from the finished fuel, it does work but...
My biggest oil sources uses Creamy Shortening. It must have some advantage for him. The Creamy (hydrogenated) part settles out over time. I pump off the thin...
Hi dougwene, If the four drums of hydrogenated oil were really worthless, why did the person buy it? I have found that Hydrogenated oil and Animal fat make...
I have used a bit of creamy oil, and even other oil that is thicker at times. Most of the time dow to abetween 34 to 38 degrees F i have no problems. below...
Shortenings are blends of different oil, tallow grease emulsified with water. First of all you must get water out, solid or hydrogenated oil can be used as a...
Hi Richard, There is a lot of misunderstanding about using animal fat oil and hydrogenated oil. The 2 stage Acid/base method is used for esterfying the FFA's...
