CFDBible : Messages : 129-158 of 207

#129

From: CFDBible@yahoogroups.com
Date: Mon Sep 1, 2008 5:02 pm
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#130

From: CFDBible@yahoogroups.com
Date: Wed Oct 1, 2008 7:55 pm
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#131

From: "lifeform23" <dga@...>
Date: Sun Oct 5, 2008 2:20 pm
Subject: 3D file formats

lifeform23

Send Email

Hi folks
There aren't many messages on this forum - I wonder if anyone is
listening.
I want to design 3D boat hulls in TurboCAD and use a mesh program to
generate a grid or mesh around them so I can analyze their
performance. Is there a free or low cost mesh generation program for
Windows which accepts standard form CAD input file formats, such as 3DS
, DAE (Collada),OR SVG, and then use the grig to calculate fluid
velocity, pressure, etc.?
Thanks
lifeform23

Reply | Messages in this Topic (1)

#132

From: "Mukkarum Husain 穆克" <mrmukkarum@...>
Date: Tue Oct 14, 2008 1:46 pm
Subject: Rearward Step (Base Flow)

mrmukkarum

Send Email

Dear Friends,

Recently I have solved rearward step (backward step) problem.
I compare results of TVD, ACM, and Experimental.
Just after step, TVD (Yee-Davis) is predicting low pressure ratio (P/Pinf) while ACM44 is predicting very accurate results (Please see attach file). But in downstream region both schemes (TVD and ACM44) over predicting pressure ratio.

May you please explain me that:

1. After step, why TVD is predicting low pressure ratio (P/Pinf) while ACM44 is predicting very accurate results???

2. At downstream region, both schemes (TVD and ACM44) over predicting pressure ratio???

Thanks and Regards

Mukkarum Husain
Ph# 00 86 10 82015053

Cell# 00 86 134 66787727
School of Fluid Mechanics

Beihang University

Beijing, PR CHINA

Reply | Messages in this Topic (1)

#133

From: CFDBible@yahoogroups.com
Date: Sat Nov 1, 2008 6:43 pm
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#134

From: CFDBible@yahoogroups.com
Date: Mon Dec 1, 2008 7:29 pm
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#135

From: CFDBible@yahoogroups.com
Date: Thu Jan 1, 2009 5:16 pm
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#136

From: CFDBible@yahoogroups.com
Date: Sun Feb 1, 2009 6:16 pm
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#137

From: CFDBible@yahoogroups.com
Date: Sun Mar 1, 2009 5:12 pm
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#138

From: viji sivan <vijisivan@...>
Date: Sat Feb 21, 2009 9:09 am
Subject: 3 Day Seminar on "Analog and Mixed Mode IC Design" from 12th to14th March 2009 at MSRSAS, Bangalore

vijisivan

Send Email

Dear Sir/Madam,

Warm Greetings from M.S.Ramaiah School of Advanced Studies, Bangalore .

The M. S. Ramaiah School of Advanced Studies (MSRSAS) a premier educational and research institution in Bangalore, is organizing an Three Day Seminar on “Analog and Mixed Mode IC Design” during 12^th, 13^th and 14^th March 2009. The Seminar brochure is enclosed & attached for your kind reference.

The contents will be extremely beneficial to the practicing engineers, scientists, academic staff and students. It is requested to kindly circulate the Seminar brochure among your staff and kindly consider nominating few staff members / students from your organization / institution / division / group to register and attend this two-day Seminar. We do hope that the Seminar will provide a valuable forum for interaction with the domain experts, helping the participants in their professional growth

Thanks & Regards,

S.Vijaykumar
Manager - Academic Relations
____________________________________________________
M.S.Ramaiah School of Advanced Studies (MSRSAS)
Gnanagangothri Campus, New BEL Road, MSR Nagar
Bangalore : 560 054
Tel No. : +91 80 2360 5539 / 2360 1983 / 2360 4759

Fax No. : +91 80 2360 1923

Direct No : +91 80 4167 4719

Mobile No : +91 9886394532

Email : vijaykumar@...; vijay_msrsas@...

Group ID : http://groups.yahoo.com/groups/MSRSAS_CPD

Website : www.msrsas.org

__________________________________________________________________________________________________________________________

Three-Day Seminar on “Analog and Mixed Mode IC Design”

Organized by

M.S.Ramaiah School of Advanced Studies

Date: 12th, 13th & 14th March 2009
(Thursday, Friday & Saturday)

Overview:
Today's technological advancements happening in industrial and commercial applications are driven by the semiconductor industry. Integrated circuits are a combination of smart analog and digital design integrated together and controlled by software. System on Chip is the technology for the next generation that integrates dedicated sensors, bio electronics, signal processing hardware's, power electronics and software's. Every product having human interface and for commercial applications have analog and mixed signal circuits. Circuit complexities and operating frequency of mixed signal circuits are increasing with demand, hence low power schemes and verification methodologies are very much required. However, the basic building blocks for mixed signal circuits that are the converters, filters and PLL still pose a challenge for engineers in designing, modeling and verifying the system. Many researchers and scientists have recommended design methods and solutions for beginners to get into the design of mixed signal circuits. This seminar is one such approach that enlightens engineers, faculties, researchers and students into the field of mixed signal IC design. In this seminar, expert speakers from industries and academics have been invited to share their design experiences in the filed of mixed signal IC design. Sharing the knowledge and experiences of these people will make an important contribution to the overall quality of the current and future design activities of the designers involved.

Objectives:
• To discuss the mixed signal IC design market, past, present and future trends
• To discuss the importance of MOS models and its impact on design
• To demonstrate the importance of software reference models for mixed signal IC design
• To design, model and analyze converters, filters and PLLs
• To set up a platform for the delegates to discuss with industry experts, scientists and academicians for sharing their experiences

Who should attend?
All engineers / designers / managers / decision makers Industry experts, academicians, researchers, students and beginners in the field of VLSI design can register.

Programme Schedule

Date	Time	Programme Schedule	Faculty
DAY-1
12^th March 2009	9:30 am– 10:00 am	Key Note Address	Industry Experts
	10:00am–11:30 am	Mixed signal design past, present and future	Industry experts
	11:45am– 1:15 am	MOS device and BSIM Models	Mr. Cyril Prasanna Raj P, MSRSAS, Bangalore
	1:15 pm- 2.00 pm	Lunch Break
	2.00 pm– 3:00 pm	SPICE Coding and analysis for mixed signal circuits	Mr. Chandra Mohan, MSRSAS, Bangalore
	3:00 pm– 5:30 pm	Matlab Simulink for mixed signal design	Mr. Cyril Prasanna Raj P, MSRSAS, Bangalore
DAY-2
13^th March 2009	9.30 am - 11.00 am	DAC and ADC architectures	Mr. Cyril Prasanna Raj P, MSRSAS, Bangalore
	11.15 am 1:15 pm	Design of ADC and DAC	Industry Experts
	1:15 pm – 2:00 pm	Lunch Break
	2:00 pm - 3:00 pm	Data Converters - Simulink modeling and analysis	Mr. Cyril Prasanna Raj P, MSRSAS, Bangalore
	3:00 pm - 5:30 pm	Data Converters - Spice modeling and validation	Mr. Chandra Mohan, MSRSAS, Bangalore
DAY-3
14^th March 2009	9:30am - 11:00am	Switched capacitor	Dr. P V Anandmohan, ECIL, Bangalore
	11:15am - 1:15pm	Applications of switched capacitors	Dr. P V Anandmohan, ECIL, Bangalore
	1:15 pm - 2:00 pm	Lunch Break
	2:00 pm - 3:00 pm	Phase Locked Loops	Mr. Cyril Prasanna Raj P, MSRSAS, Bangalore
	3:00 pm - 5:30 pm	RF Oscillators	Mr. Tim Mazumdar, MSRSAS, Bangalore

Please send your registration form to,

Mr. Vijaykumar S.
Manager - Academic Relations
M S Ramaiah School of Advanced Studies
Gnanagangothri Campus, New BEL Road ,
M S R Nagar, Bangalore - 560 054, INDIA
E-Mail: vijaykumar@..., vijay_msrsas@...
Mobile: 98863 94532

Mr. Keerthen Shankpal
Executive- Academic Relations
M S Ramaiah School of Advanced Studies
Gnanagangothri Campus, New BEL Road ,
M S R Nagar, Bangalore - 560 054, INDIA
E-mail: keerthen@...,
Mobile : 99864 74867

Phone: 080-2360 5539 / 1983 / 4759, Fax: 080 - 2360 1923 Direct: 080-4167 4719

Last date for registration - 09th March 2009(Monday)
Note: Outstation participants to send only DD/Cash

Registration Fee:

Rs. 3,500/- For Industrial Participants
Rs. 2,000/- For Faculty from Academic Institutions
Rs. 1,000/- For Students from Academic Institutions
(Inclusive of course material, lunch & tea)

Note: Payments to be made through D.D in favour of M.S.Ramaiah School of Advanced Studies, Payable at Bangalore .

REGISTRATION FORM

M.S.RAMAIAH SCHOOL OF ADVANCED STUDIES
Gnanagangothri Campus, New BEL Road , M.S.R Nagar,
Bangalore – 560 054, INDIA .
Telefax: 91-80-2360 5539, 2360 1983, 2360 4759
e-mail: cpd@...
Website: www.msrsas.org

Programme : “Analog and Mixed Mode IC Design: A Practical Approach”

Date :12th - 14th March, 2009 ( Thursday, Friday & Saturday )

Please register the following persons

Name Designation

1)______________________________________________

2)______________________________________________

3)______________________________________________

4)______________________________________________

5)______________________________________________

We enclose Cheque/ DD No:____________ dated_________for Rs._________ drawn in favour of M.S.Ramaiah School of Advanced Studies, Payable at Bangalore .

Nominated By

Name: _________________________________________

Designation: ____________________________________

Organization ____________________________________

Address: _______________________________________

_______________________________________________

Phone Nos:_______________________________________

Fax Nos:_________________________________________

E-Mail: __________________________________________

Signature with Seal
Date:

Connect with friends all over the world. Get Yahoo! India Messenger.

Add more friends to your messenger and enjoy! Invite them now.

Reply | Messages in this Topic (1)

#139

From: viji sivan <vijisivan@...>
Date: Wed Mar 18, 2009 4:27 am
Subject: Week Ends Industry relevant PG Degree Programme at MSRSAS from April 2009.

vijisivan

Send Email

Dear All,

While you work on the job for week days, work on your career on weekends (Saturday & Sundays) at MSRSAS, Bangalore to become professionally strong.

You may kindly be aware that M.S.Ramaiah School of Advanced Studies (MSRSAS) offers industry relevant postgraduate engineering and management courses on part time route (Every Year in month of April). The classes for part time route are conducted on Saturday (2.00PM to 5.00PM) & Sundays (10..00AM to 1.00PM) to facilitate working engineers to attend the classes during their weekends. Since April 2003, the courses are attracting a large number of students as these courses are helping them to develop problem solving skills and also to take up new challenges. The programme is quite flexible and the courses are designed and delivered so that even an average engineer is able to cope up and at work places able to com pete with colleagues having brilliant academic career.

Every year around 200 working professionals in & around Bangalore take admissions in our Part –time PG Degree Programme. Most of MNC’s & Private sectors are nominating and sponsoring their engineers for these programmes.

Admission opened for Week Ends PG Degree Programme – April 2009

If you would like know more about our courses, details are as mentioned below & can also be accessed at www.msrsas.org. For any further details or clarifications, please reply to this mail or call me on my mobile 9886394532 / 080- 4167 4719 / 23601983 / 23604759.

Kindly forward this mail to your contacts to whom it may be useful.

Warm Regards

S.Vijaykumar
Manager - Academic Relations
_______________________________________________________________
M.S.Ramaiah School of Advanced Studies (MSRSAS)
Gnanagangothri Campus, New BEL Road, MSR Nagar
Bangalore : 560 054
Tel / Fax No. : +91 80 2360 5539 / 2360 1983 / 2360 4759
Mobile No: +91 9886394532
Email: vijay kumar@...; cpd_msrsas@...; vijay_msrsas@yahoo. com
Group Id : http://groups.yahoo.com/groups/MSRSAS_CPD
Website : www.msrsas.org

M.S. Ramaiah School of Advanced Studies

Postgraduate Engineering Degree & MBA Programme

Announcement For Admissions to Week Ends PG Degree Programme

M.S. Ramaiah School of Advanced Studies invites applications from eligible candidates for admissions to Part Time Postgraduate Engineering Degree & MBA Programme leading to M.Sc.[Engineering] / MBA Degree of Coventry University , UK .

Courses commence on 11th April 2009

Postgraduate Engineering Courses Offered:

Postgraduate Engineering Courses	Total Tuition Fee (Rs.)	Number of Installments	Eligibility
Automotive Engineering	2,40,000	3 installments of Rs. 80 000/- each	Engineering graduates from appropriate discipline Technical Diploma holders & Science graduates with a minimum of 3 years experience in concerned industries, Postgraduates in Science in relevant area of specialization For Biomedical Engineering, engineering graduates of any discipline, except civil engineering can apply Selection is based on Merit and industry experience
Automotive Product Design	2,40,000	3 installments of Rs. 80 000/- each
Automotive Electronics	2,00,000	3 installments of Rs. 66 667/- each
Biomedical Engineering	2,00,000	3 installments of Rs. 66 667/- each
Computer Graphics & Virtual Reality	2,00,000	3 installments of Rs. 66 667/- each
Engineering and Manufacturing Management	2,00,000	3 installments of Rs. 66 667/- each
Manufacturing System Engineering	2,00,000	3 installments of Rs. 66 667/- each
Manufacturing Science & Technology	2,00,000	3 installments of Rs. 66 667/- each
Product Design	2,00,000	3 installments of Rs. 66 667/- each
Real Time Embedded Systems	2,00,000	3 installments of Rs. 66 667/- each
Rotating Machinery Design	2,00,000	3 installments of Rs. 66 667/- each
Signal Processing & Communication Technology	2,00,000	3 installments of Rs. 66 667/- each
VLSI System Design	2,00,000	3 installments of Rs. 66 667/- each

Management Course Offered:

Course Name	Total Tuition Fee (Rs.)	Number of Installments	Eligibility
MBA Programme in Engineering Operation	2,70,000/-	3 installments of Rs. 90 000/- each	BE, MCom, BCom, BBA, BSc, MSc , MA , BA and any other graduates can apply. Selection is on merit among the applied candidates.

Admission Process:

· Interested candidates can avail application form and prospectus from Manager-Admissions on payment of Rs.500/- either in cash or DD drawn in favour of "M.S. Ramaiah School of Advanced Studies" payable at Bangalore .

· In addition to Tuition Fee, the candidates are required to Pay Rs. 8000/- towards registration which include course ware, library, internet, Alumni and other Fees

· Library caution deposit of Rs.2000/- (refundable after com pletion of course)

Important Date:

Last Date for Admissions : 31st March 2009
Course Commencement : 11th April 2009

Contact: Manager-Admissions, M.S. Ramaiah School of Advanced Studies, New BEL Road, MSR Nagar, Bangalore-560054, Ph/fax: 080-2360 5539/1983/4759; e-mail: admin@... , msrsas@...

Corporate M.Sc (Engineering):

MSRSAS offers Corporate M.Sc. (Engg) courses for the industries and corporates that are interested in value addition and up gradation of the academic qualifications of their associates and employees. M.Sc. (Engg) courses for corporates / industries will be customized to meet their requirement. These courses are offered at the client premises as part-time programme for a duration of about 2-3 years and the M.Sc (Engg) degree is awarded by the Coventry University U.K.

Interested corporates can choose a course of their choice from the available 13 post-graduate courses or can suggest a special tailor made course consisting of 10 modules, choosing the modules from any of the existing courses offered. One or two new modules may also be suggested by the corporates to meet the specific requirements.

A minimum of 15 delegates from the industry / corporate are essential to offer the course. Course duration (two or three years) and the module delivery time (morning or evening) are finalized in consultation with the industry/corporate.

MSRSAS is currently offering Corporate M.Sc (Engg) courses to well known corporates like Altair Engineering (India) Pvt. Ltd, Robert Bosch India Ltd, Bangalore and MICO Bosch. Shortly the programme will also be offered at Schneider Electric.

For further details please contact: vijaykumar@...; vijay_msrsas@...

Check out the all-new Messenger 9.0! Click here.

Add more friends to your messenger and enjoy! Invite them now.

Reply | Messages in this Topic (1)

#140

From: "hootanatooh" <hootanatooh@...>
Date: Tue Mar 17, 2009 7:49 am
Subject: Ocean Wave with Fluent?

hootanatooh

Send Email

hello
i want to model and analyze a 2d wave that reaches the beach(which isconsidered to be like a step as shown below) and breaks.i have all thedimesions such as depth of water or wave profile in the ocean and ishould obtain the height and the shape of the wave on the beach(step)
http://www.pikipimp.com/pp/pimped_photo/s/image/42/345/708/before_reaching_to_beach.JPG?ts=1237275980791
http://www.pikipimp.com/pp/pimped_photo/s/image/42/345/708/after_reaching_to_beach.JPG?ts=1237276153216
but because i am a beginner
i have following quetions:
1-i have just access to Fluent software,so is Fluent capable of solvingthis problem?i have heard that i should use VOF and Fluent has thisfeature but i don't know that Fluent can solve this problem about waves.
2-which software is the best for this problem among CFX,Fluent,Flow3d?
3-if Fluent is capable of solving this problem,how much timeapproximately is needed for a complete beginner to learn VOF and solvethis problem with Fluent and do i need learn UDF writing?

Reply | Messages in this Topic (1)

#141

From: CFDBible@yahoogroups.com
Date: Mon Apr 6, 2009 9:58 am
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#142

From: "mikel.telleria" <mikel.telleria@...>
Date: Thu Apr 9, 2009 10:37 pm
Subject: Question of CFD

mikel.telleria

Send Email

Hi guys!
I need your help to solve this problem of CFD (the file is called: "Question of
CFD.pdf" and it's in Files section). I have a lack of knowlegment of this
issues. So I need the solution of this problem to understand it.
Could you help me, please?
Thanks in advance.
Best Regards,
Mike

Reply | Messages in this Topic (1)

#143

From: CFDBible@yahoogroups.com
Date: Fri May 1, 2009 11:47 am
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#144

From: CFDBible@yahoogroups.com
Date: Mon Jun 1, 2009 11:13 am
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#145

From: "Moataz Bellah Mahmoud" <mizo_ahlawy@...>
Date: Mon May 4, 2009 4:36 pm
Subject: Catalytic reaction in Gas-Solid flow (NEED HELP)

mizo_ahlawy

Send Email

I am working on FLUENT 6.3 on a Circulating fluidised bed "Reactor" case. I am
just not sure which model shall I use to model the catalytic reactions in my
multiphase case (Gas-Solid flow).
There are 2 options:-
1- Use heterogeneous model which I can find at "Define-->Phases-->
Interactions--> Reactions"
2- Enable "Particle Surface" reaction from "Define--> Models-->Species--->
Transport & Reaction" then define the reaction from Mixture material properties
at "Define materials" and choose catalyst as a solid phase.

Which one shall I go for, or do both of them work?

I am highly appreciating your cooperation.
Thanks in advance and looking forward for you reply.

Reply | Messages in this Topic (1)

#146

From: CFDBible@yahoogroups.com
Date: Wed Jul 1, 2009 11:29 am
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#147

From: CFDBible@yahoogroups.com
Date: Sat Aug 1, 2009 10:46 am
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#148

From: CFDBible@yahoogroups.com
Date: Tue Sep 1, 2009 11:33 am
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#149

From: CFDBible@yahoogroups.com
Date: Thu Oct 1, 2009 11:42 am
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#150

From: viji sivan <vijisivan@...>
Date: Fri Oct 9, 2009 4:08 am
Subject: Two Day Seminar on "Competitive Manufacturing - Technologies and Management Paradigms" during on 23rd & 24th October 2009 at MSRSAS in Bangalore.

vijisivan

Send Email

Dear All,

Sub: Two Day Seminar on “Competitive Manufacturing - Technologies and Management Paradigms”

M. S. Ramaiah School of Advanced Studies (MSRSAS), a premier educational and research institution in Bangalore, is organizing a two day seminar on “Competitive Manufacturing - Technologies and Management Paradigms” on 23^rd & 24^th October 2009. The e-brochure of the seminar is enclosed herewith for your kind reference. The lectures are planned to be delivered by experts from industry and research organizations. The contents will be extremely beneficial to the practicing engineers, scientists, academic staff and students. It is requested to kindly circulate the Seminar brochure among your staff and kindly consider nominating few staff members / students from your organization / institution / division / group to register and attend this two day seminar. We do hope that the Seminar will provide a valuable forum for interaction with the domain experts, helping the participants in their professional growth.

Thanking you and with warm regards,

Sincerely,

S.Vijaykumar
Manager - Academic Relations
____________________________________________________
M.S.Ramaiah School of Advanced Studies (MSRSAS)
Gnanagangothri Campus, New BEL Road, MSR Nagar
Bangalore : 560 054
Tel No. : +91 80 2360 5539 / 2360 1983 / 2360 4759

Fax No. : +91 80 2360 1923

Direct No: +91 80 4167 4719

Mobile No: +91 9886394532

Email: vijaykumar@...; vijay.msrsas@...

Group ID: http://groups.yahoo.com/groups/MSRSAS_CPD

Website: www.msrsas.org / www.msrsas.org/Training&LifeLongLearning/seminars.htm.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Two Day Seminar on "Competitive Manufacturing - Technologies and Management Paradigms"

Organized by

M. S. Ramaiah School of Advanced Studies

Date: 23^rd & 24^th October 2009
(Friday & Saturday)

Venue: M. S. Ramaiah School of Advanced Studies, Bangalore

About the seminar:
Today, industries have to excel in technology and managerial aspects to be competitive in the global market. Advanced tools and management strategies are becoming inevitable to achieve and sustain obverse status for the organizations. Competitive Manufacturing involves marshalling the resources available to the organizations for ensuring peak performance. It means exceeding the performance of the competitors in all aspects of business such as quality, lead time, flexibility, innovation, performance, HR practices, value for money to the customer, customer service etc.

In this era of hyper competition, organizations need to excel in the selected fields. Organizations also need to change the concepts and practices being followed currently, in order to achieve their goal of Competitive Manufacturing.

Some of the elements to Competitive Manufacturing that needs to be addressed are: Lead time reduction-through factory simulation / virtual manufacturing tools, Net shaped manufacturing for energy and cost savings, Efficient planning, Scheduling and waste elimination, Human resource development and motivation, Measurement and improvement of quality, Automate enterprise processes, Determine key performance indicators (KPI); Track and monitor, Define & improve customer satisfaction, Optimize make or buy process. These aspects are important and besides, they are also interdependent.

Today, a large number of tools are available to measure, improve and monitor each of these elements; smart organizations ought to deploy as many of these tools as possible in order to achieve Competitive Manufacturing status and enjoy advantages over their business rivals.

Objectives:
• Essentials and benefits of Competitive Manufacturing
• Elements of Competitive Manufacturing
• Tools and management strategies for efficient manufacturing
• Role of innovation in manufacturing and strategies for green manufacturing

Who should attend?
All practicing executives, engineers, managers, designers etc., who are currently working in all the departments of all types of manufacturing industries and who are likely to assume senior level responsibilities in future will benefit from exposure to this seminar. Faculties and students of engineering colleges and other academics, who are associated with fields related to manufacturing will also benefit from participating in this seminar.

Day 1 23.10.2009 Friday
Time	Programme	Faculty
9.30 am - 11.00 am	Inauguration and Keynote Address	Mr. Thiagarajan, President, Harita Seating Systems Ltd., Hosur
Tea Break
11.30 am - 12.15 pm	Essentials of a Competitive Manufacturing Organisation	Mr. SGP Naidu, Director, Federal Mughal, Bangalore
12.15 pm - 1.15 pm	Development of human resource for Competitive Manufacturing	Mr. Nagabhushana, Wipro Infrastructure Engineering Ltd., B’lore
Lunch Break
2.00 pm - 3.00 pm	Motivation and personnel development for profitability	Mr. Vittala Rao, HR Manager (Rtd), Escorts, HR Consultant., B’lore
3.00 pm - 3.45 pm	Effective planning and scheduling for efficient manufacturing	Preactor Software India, Bangalore
Tea Break
4.00 am - 5.00 am	Lean Six Sigma approach for quality management – industrial case study	Mr. Purushotham Gururaj, Filtrona Filter Products, Payne India

Day 2 24.10.2009 Saturday
9.30 am - 10.15 am	Product Lifecycle Management tools and techniques for Competitive Manufacturing	EDS Technologies, Bangalore
10.15 am - 11.15 am	Lead time reduction through process simulation and modeling	ESI Group India, Bangalore
Tea Break
11.30 am -12.30 pm	Strategies for world class manufacturing	Mr. Ranjan Rao, Deloitte Touche Tohmatsu India Pvt. Ltd., B’lore
12.30 pm - 1.15 pm	Effective supply chain management	Mr. Manjunath K C, Triveni Engineering Industries Ltd., Bangalore
Lunch Break
2.00 pm - 2.45 pm	System simulation and automation for manufacturing	Abcon Information Systems, Bangalore
2.45 pm - 3.30 pm	Innovation in manufacturing - a competitive edge	Industry Experts
Tea Break
3.45 pm - 4.30 pm	Near Net shape Manufacturing to save energy and costs	Mr. V Gopalakrishna, Director, Metform Research, Bangalore
4.30 pm - 5.15 pm	Green Manufacturing – strategies and benefits	Tata Energy Research Institute, Bangalore

For Technical Queries Contact: Dr. N S Mahesh Centre for Manufacturing, Dept. of Mechanical & Manufacturing Engineering, MSRSAS Mail : nsm@... Phone : 080-2360 5539/1983/4759 Cell : 98450 37313

Please send your registration form to,

Mr. Vijaykumar S.
Manager - Academic Relations
E-Mail: vijaykumar@..., vijay_msrsas@..., vijay.msrsas@...
Mobile: 98863 94532

Ms. Archana Madhukar
Executive- Academic Relations
E-mail: archana.m@... , archanamsrsas@...
Mobile: 9986642719

Ms. Roopa
Asst. Executive- Academic Relations
E-mail: roopa@..., rupamsrsas@...
Mobile: 96111 21126

Phone: 080-2360 5539 / 1983 / 4759, Fax: 80 - 2360 1923 Direct: 4167 4719

Last date for registration – 21^st October 2009

Note: Outstation participants to send only DD

Registration Fee:

Rs. 2,500/- For Industrial Participants
Rs. 2,000/- For Participants from Govt. Research Organisations
Rs. 1,500/- For Faculty from Academic Institutions
Rs. 750/- For Students from Academic Institutions
(Inclusive of course material, lunch & tea)

Note: Payments to be made through D.D in favour of : M.S.Ramaiah School of Advanced Studies, Payable at Bangalore.

REGISTRATION FORM

M.S.RAMAIAH SCHOOL OF ADVANCED STUDIES
Gnanagangothri Campus,
New BEL Road, M.S.R Nagar,
Bangalore – 560 054, INDIA.
Telefax: 91-80-2360 5539, 2360 1983, 2360 4759
e-mail : cpd@...
Website: www.msrsas.org

Programme : “Competitive Manufacturing - Technologies and Management Paradigms”

Date : 23^rd & 24^th October 2009 (Friday & Saturday )

Please register the following persons

Name Designation :

1)______________________________________________

2)______________________________________________

3)______________________________________________

4)______________________________________________

5)______________________________________________

We enclose Cheque/ DD No:____________ dated_________for Rs._________ drawn in favour of M.S.Ramaiah School of Advanced Studies, Payable at Bangalore.

Nominated By :

Name: _________________________________________

Designation: ____________________________________

Organization ____________________________________

Address: _______________________________________

_______________________________________________

Phone Nos:_______________________________________

Fax Nos:_________________________________________

E-Mail: __________________________________________

Signature with Seal
Date:

Add whatever you love to the Yahoo! India homepage. Try now!

Connect more, do more and share more with Yahoo! India Mail. Learn more.

1 of 1 File(s)

Reply | Messages in this Topic (1)

#151

From: "neverdie_bhi_1991" <neverdie_bhi_1991@...>
Date: Fri Sep 11, 2009 3:39 am
Subject: GATE 2010 is recruiting (Head & Members)

neverdie_bhi...

Send Email

GATE "Go Ahead Take Experience
(We are student activity)

Now, GATE is in faculty of engineering at Helwan university

GATE, the leading technical student activity in FECU is back again. GATE aims
helping students excel in their careers through providing distinguished
practical technical experience.

GATE 2010 is recruiting members to fill positions in the following committees:

1. Human Resources (Head & Members)
2. Logistics (Head & Members)
4. IT Committee (Head & Members)
5. Technical coordinators (Head & Members)

Check the attached file for job descriptions and specifications and GATE 2010
application.

you can demand the application from
gate2010rec@...
or
hady.smile@...
mobile: 0111899458

and then sent it to the same mail

GATE's Vision
Sharing positively, playing an important role to the advancement of our
education, and enhancing its perception in the eyes and mind of the community.

GATE's Mission
Developing an engineering students' generation believing and capable of applying
the academic and practical experiences acquired throughout the years of
undergraduate study.

GATE's Values
Innovation, as we promote new ideas and welcome positive changes, hence our
dedication of two committees on our organizational structure for continuously
incubating and producing new ideas aiming the refining of our performing to the
optimum.
Professional Volunteerism, as we adopt quite organized work procedures and rules
that govern our attitude essentially based upon our sense of volunteerism and
love to help build creating a commitment to perform as efficient and productive
as possible.
Sustainability, as we evaluate on the long-run, caring not only for the present
of GATE, yet its future performance to continue to exist, serve its vision and
mission, and interact with its stakeholders

Reply | Messages in this Topic (3)

#152

From: "huget_teguh@..." <huget_teguh@...>
Date: Tue Sep 15, 2009 11:04 pm
Subject: How to DRAW CURVE ON GAMBIT??

huget_teguh...

Send Email

Dear
I'm Teguh. I'm interested in drawing n simulate fluid motion on CFD.. My final
project is about redesigning water turbine (Crossflow turbine type). But I have
constrained in drawing on Gambit. By the way, How to draw a curve in Gambit? The
curve has no equation so i cannot draw easily. I'm lookin foward to get your
reply!!! Thanks for your Attention.
Teguh

Reply | Messages in this Topic (8)

#153

From: "neverdie_bhi_1991" <neverdie_bhi_1991@...>
Date: Fri Sep 11, 2009 2:25 am
Subject: GATE 2010 is recruiting (Head & Members)

neverdie_bhi...

Send Email

GATE "Go Ahead Take Experience
(We are student activity)

Now, GATE is in faculty of engineering at Helwan university

GATE, the leading technical student activity in FECU is back again. GATE aims
helping students excel in their careers through providing distinguished
practical technical experience.

GATE 2010 is recruiting members to fill positions in the following committees:

1. Human Resources (Head & Members)
2. Logistics (Head & Members)
4. IT Committee (Head & Members)
5. Technical coordinators (Head & Members)

Check the attached file for job descriptions and specifications and GATE 2010
application.

you can demand the application from
gate2010rec@...
or
hady.smile@...
mobile: 0111899458

and then sent it to the same mail

GATE's Vision
Sharing positively, playing an important role to the advancement of our
education, and enhancing its perception in the eyes and mind of the community.

GATE's Mission
Developing an engineering students' generation believing and capable of applying
the academic and practical experiences acquired throughout the years of
undergraduate study.

GATE's Values
Innovation, as we promote new ideas and welcome positive changes, hence our
dedication of two committees on our organizational structure for continuously
incubating and producing new ideas aiming the refining of our performing to the
optimum.
Professional Volunteerism, as we adopt quite organized work procedures and rules
that govern our attitude essentially based upon our sense of volunteerism and
love to help build creating a commitment to perform as efficient and productive
as possible.
Sustainability, as we evaluate on the long-run, caring not only for the present
of GATE, yet its future performance to continue to exist, serve its vision and
mission, and interact with its stakeholders

Reply | Messages in this Topic (3)

#154

From: "neverdie_bhi_1991" <neverdie_bhi_1991@...>
Date: Fri Sep 11, 2009 2:25 am
Subject: GATE 2010 is recruiting (Head & Members)

neverdie_bhi...

Send Email

GATE "Go Ahead Take Experience
(We are student activity)

Now, GATE is in faculty of engineering at Helwan university

GATE, the leading technical student activity in FECU is back again. GATE aims
helping students excel in their careers through providing distinguished
practical technical experience.

GATE 2010 is recruiting members to fill positions in the following committees:

1. Human Resources (Head & Members)
2. Logistics (Head & Members)
4. IT Committee (Head & Members)
5. Technical coordinators (Head & Members)

Check the attached file for job descriptions and specifications and GATE 2010
application.

you can demand the application from
gate2010rec@...
or
hady.smile@...
mobile: 0111899458

and then sent it to the same mail

GATE's Vision
Sharing positively, playing an important role to the advancement of our
education, and enhancing its perception in the eyes and mind of the community.

GATE's Mission
Developing an engineering students' generation believing and capable of applying
the academic and practical experiences acquired throughout the years of
undergraduate study.

GATE's Values
Innovation, as we promote new ideas and welcome positive changes, hence our
dedication of two committees on our organizational structure for continuously
incubating and producing new ideas aiming the refining of our performing to the
optimum.
Professional Volunteerism, as we adopt quite organized work procedures and rules
that govern our attitude essentially based upon our sense of volunteerism and
love to help build creating a commitment to perform as efficient and productive
as possible.
Sustainability, as we evaluate on the long-run, caring not only for the present
of GATE, yet its future performance to continue to exist, serve its vision and
mission, and interact with its stakeholders

Reply | Messages in this Topic (3)

#155

From: CFDBible@yahoogroups.com
Date: Sun Nov 1, 2009 11:38 am
Subject: File - Monthly Picture

CFDBible@yahoogroups.com

Send Email

Dear CFDBible Member;

The CFDBible committee calls for the CFD picture of the month.
Interested individuals or organizations can contribute self
owned or courtesy pictures, all are welcome.

The picture should show a demonstrative solution for a
relatively complex problem. All applications are welcomed.
The contributer can put his/her name and/or organization on the
picture as publicity. He/she can, optionally, mention
the used software and visualization package. It will also be
better to give some info about the problems physics to gain
the viewer interest.

The picture should be in JPG, PNG, GIF, or BMP formats
with good size and resolution of course. All contributed
pictures will be filtered by the committee and the resulting
collection will be polled on by all the group members.

Please send your pictures to: CFDBible@...
or to the CFDBible group at : CFDBible@yahoogroups.com

Finally, we don't have to tell you that CFDBible committee
is very open minded for all members' ideas.

Lets CFD Now!

------------------------
CFDBible Committee

Reply | Messages in this Topic (70)

#156

From: mahdi hosseinali <anishtain4@...>
Date: Sat Oct 31, 2009 1:26 am
Subject: Re: How to DRAW CURVE ON GAMBIT??

anishtain4

Send Email

Hi
Sorry for late reply. you have to press and hold the key on the straight line icon on right panel and it will open, then there are all of the options for drawing lines in GAMBIT. There is another method that is used for airfoils which is by adding a lot of point and then straightly connecting them to each other, this may seems a little ugly but it is thoroughly accepted in literature even for accurate works. I guess if your curve dont be a part of circle you have to take the second way.

Thank & bye

--- On Tue, 9/15/09, huget_teguh@... <huget_teguh@...> wrote:

From: huget_teguh@... <huget_teguh@...>
Subject: [CFDBible] How to DRAW CURVE ON GAMBIT??
To: CFDBible@yahoogroups.com
Date: Tuesday, September 15, 2009, 7:04 PM

Dear
I'm Teguh. I'm interested in drawing n simulate fluid motion on CFD.. My final project is about redesigning water turbine (Crossflow turbine type). But I have constrained in drawing on Gambit. By the way, How to draw a curve in Gambit? The curve has no equation so i cannot draw easily. I'm lookin foward to get your reply!!! Thanks for your Attention.
Teguh

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/CFDBible/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/CFDBible/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:CFDBible-digest@yahoogroups.com
mailto:CFDBible-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
CFDBible-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Reply | Messages in this Topic (8)

#157

From: singh prakash <sprakash29@...>
Date: Sat Nov 7, 2009 4:37 am
Subject: Re: How to DRAW CURVE ON GAMBIT??

sprakash29

Send Email

hi,

for curve geometries like airfoil or turbine blade in gambit is difficult to draw if it is not arc of a circle. when drawing a curve in gambit, we have to either specify three points on arc or by center and two points on the circle, but airfoil is not a single arc so the way is, draw the geometry in cad software like proe or autocad or solid work then generate the coordinate of the point required for gambit as told earlier this will generate accurate geometry other direct method may approximate the geometry in gambit..

the other method may be complex for a beginner, save the cad geometry in iges format and import the vertex data in gambit, this is fast process but may have problem in big geometries.

hope this may help you..

singh prakash, M. Ae. SI
scientist DRDL

--- On Sat, 31/10/09, mahdi hosseinali <anishtain4@...> wrote:

From: mahdi hosseinali <anishtain4@...>
Subject: Re: [CFDBible] How to DRAW CURVE ON GAMBIT??
To: CFDBible@yahoogroups.com
Date: Saturday, 31 October, 2009, 6:56 AM

Hi
Sorry for late reply. you have to press and hold the key on the straight line icon on right panel and it will open, then there are all of the options for drawing lines in GAMBIT. There is another method that is used for airfoils which is by adding a lot of point and then straightly connecting them to each other, this may seems a little ugly but it is thoroughly accepted in literature even for accurate works. I guess if your curve dont be a part of circle you have to take the second way.

Thank & bye

--- On Tue, 9/15/09, huget_teguh@ ymail.com <huget_teguh@ ymail.com> wrote:

From: huget_teguh@ ymail.com <huget_teguh@ ymail.com>
Subject: [CFDBible] How to DRAW CURVE ON GAMBIT??
To: CFDBible@yahoogroup s.com
Date: Tuesday, September 15, 2009, 7:04 PM

Dear
I'm Teguh. I'm interested in drawing n simulate fluid motion on CFD.. My final project is about redesigning water turbine (Crossflow turbine type). But I have constrained in drawing on Gambit. By the way, How to draw a curve in Gambit? The curve has no equation so i cannot draw easily. I'm lookin foward to get your reply!!! Thanks for your Attention.
Teguh

------------ --------- --------- ------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups. yahoo.com/ group/CFDBible/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups. yahoo.com/ group/CFDBible/ join
(Yahoo! ID required)

<*> To change settings via email:
mailto:CFDBible-digest@ yahoogroups. com
mailto:CFDBible-fullfeatur ed@yahoogroups. com

<*> To unsubscribe from this group, send an email to:
CFDBible-unsubscrib e@yahoogroups. com

<*> Your use of Yahoo! Groups is subject to:
http://docs. yahoo.com/ info/terms/

The INTERNET now has a personality. YOURS! See your Yahoo! Homepage.

Reply | Messages in this Topic (8)

#158

From: Hady Ariwibowo Teguh <huget_teguh@...>
Date: Mon Nov 9, 2009 1:29 pm
Subject: Re: How to DRAW CURVE ON GAMBIT??

huget_teguh...

Send Email

Dear Mr mahdi

Thanks for your reply. I'll try ^^. I've other question for you, when i wanna simulate an airfoil GOE type. there is some thing wrong. The value of Cl is close to hand book but Cd is far to hand book. what's wrong with my simulation??
I'm looking forward to receiving your answer.
teguh
--- On Sat, 10/31/09, mahdi hosseinali <anishtain4@...> wrote:

From: mahdi hosseinali <anishtain4@...>
Subject: Re: [CFDBible] How to DRAW CURVE ON GAMBIT??
To: CFDBible@yahoogroups.com
Date: Saturday, October 31, 2009, 1:26 AM

Hi
Sorry for late reply. you have to press and hold the key on the straight line icon on right panel and it will open, then there are all of the options for drawing lines in GAMBIT. There is another method that is used for airfoils which is by adding a lot of point and then straightly connecting them to each other, this may seems a little ugly but it is thoroughly accepted in literature even for accurate works. I guess if your curve dont be a part of circle you have to take the second way.

Thank & bye

--- On Tue, 9/15/09, huget_teguh@ ymail.com <huget_teguh@ ymail.com> wrote:

From: huget_teguh@ ymail.com <huget_teguh@ ymail.com>
Subject: [CFDBible] How to DRAW CURVE ON GAMBIT??
To: CFDBible@yahoogroup s.com
Date: Tuesday, September 15, 2009, 7:04 PM

Dear
I'm Teguh. I'm interested in drawing n simulate fluid motion on CFD.. My final project is about redesigning water turbine (Crossflow turbine type). But I have constrained in drawing on Gambit. By the way, How to draw a curve in Gambit? The curve has no equation so i cannot draw easily. I'm lookin foward to get your reply!!! Thanks for your Attention.
Teguh

------------ --------- --------- ------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups. yahoo.com/ group/CFDBible/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups. yahoo.com/ group/CFDBible/ join
(Yahoo! ID required)

<*> To change settings via email:
mailto:CFDBible-digest@ yahoogroups. com
mailto:CFDBible-fullfeatur ed@yahoogroups. com

<*> To unsubscribe from this group, send an email to:
CFDBible-unsubscrib e@yahoogroups. com

<*> Your use of Yahoo! Groups is subject to:
http://docs. yahoo.com/ info/terms/

Reply | Messages in this Topic (8)

Yahoo! Groups

Breaking News Visit Yahoo! News for the latest.

The Yahoo! Groups Product Blog

Check it out!

Group Information

Yahoo! Groups Tips

Did you know...

Messages

Programme Schedule

Programme Schedule