Hi All, I uploaded a new version of GMFC. This one include major internal changes for the support of acceleration and USB. So the old ones are still available....
Found the issue. Took alittle work to isolate this. When I cut a stack, the wire is cooler up top. I have a ceiling fan in the room where my table is. If I...
There is a difference if an uncontrolled room from winter to summer or even days with wide temp swings. In your case I bet just laying another piece of foam...
Hi All, I place a improved version of the doc with a tutorial on rectangular panels and spars at http://gm.cnc.free.fr/CNC/gmfc_en.chm The tapered section will...
How do the two programs compare. I will use a MM2001 board. I have seen GMFC in action but am not sure if Jedicut can do all the functions and it is free. ...
Hi Gilles, Thanks for doing this, but the tutorial will not open all the contents. The directories come up OK, but the body of the files are not available. ...
Gilles, The same problem as with me (I suppose). The left frame of the window (the directory) looks good, works good. The right frame (where the chosen subject...
... I have the same problem. The left window works good, i can see all topics and navigate, the right shows nothing. It's simply blank. It doesn't matter,...
Gilles, Yes. I've tried more than half the menu, at least 15 index-subjects, and a few searched items. None of then got displayed at the right frame. Dirk. ......
Yes Gilles, All the menue pulldowns are working on the left side, but none of the information files will open up on the right side. It says - The page cannot...
Hi Gilles, It works for me here (Billings Mt) the right side come up with 9 items and all work except the taper panel. I place the file on my desktop. Robert...
I have worked with both, including foamworks. They all have their own positives, and their own negatives. A lot of it boils down to the fact that of what...
Gilles, As a further piece of information regarding my installation, I filed the tutorial file in the same directory and folder as the rest of the GMFC .exe...
... ok, so I am not the only strange guy here ;-) The taper panel is not yet written.... Gilles -- Gilles Muller http://gm.cnc.free.fr/ Register your table on...
Found the problem, Gilles..... If the help file isn't working, right click on the .CHM file, select UNBLOCK, and click on OK. This will fix it... Happy...
I found the fix OK. As refered to by Don. In the GMFC dir, right click on the ***.cmh, and select "properties", and click on "unblock", and then "apply", OK...
Thanks, Richard.. Forgot to type the 'properties' part... Sorry bout that.. Glad it worked for you. Don www.eurekaaircraft.com ... select "properties", and...
... Hum, I don't have this block/unblock in the properties... which version of IE is installed on your PC? Gilles -- Gilles Muller http://gm.cnc.free.fr/ ...
Hi Gilles, I confused me. It seems the "Blocked status and Un-Block option" is not shown if the .cmh file has been unblocked. It seems to be related to .CMH...
Hi, First post having just successfully completed my foam cutting rig ... I suspect it may not be as straightforward to answer this query as I had at first...
... Hi all, The reason is in the Microsoft security fix: 896358 .chm that come from a web server are unblocked, until they are explicitely unblocked... ;-) ...
When I downloaded at work I had a similar problem. Menu but no info. Downloaded at home no problem. Both machines are similar spec an OS. Bill Scott Belfast ...
The final word is that I had no problem to see it, even after downloading from the web, because I am using Seamonkey (firefox). The "blocking" feature is added...
Hi Gilles, Can you check to see if you got my pay pal on the 5th of April, 2007 and the email with my PC code on the 6th of April 2007 I sent these to your...
Richard, Thnx, it Works now. Dirk. Van: CNCFoamcutters@yahoogroups.com [mailto:CNCFoamcutters@yahoogroups.com] Namens Richard Gammon Verzonden: vrijdag 6 april...
