... You could use Mach and make a custom screen. Include only the controls that are on the CNCpro screen and it should be no more intimidating. ron ginger...
I boot and run cnc pro from a floppy you need a fat partition an the c drive with a cncpro and a cncpro/gcode directory. I have an autoexec.bat file that...
OK, a bit of progress. SHOULD now output a byte or a string out COM1 when an "S" is encountered in the GCode file. Also, all comments are output out COM1. Both...
Hi Alan Sounds good. Unfortunately I can't play with hardware for another two weeks (projects) I just though of a sneak trick to take advantage of the...
Hi Alan There's something I want to implement in CNCPRO, and so I want to mess with the code (unless you want to do it??) Can you give me a brief primer on...
... It compiles using Borland C++ Version 3.1. If you're willing to make a few insignificant changes to the code, it will compile with Borland C+ + 5.02 set to...
Hi, I am a new member of CNCPRO group, and just few days ago I downloaded the source code of CNCPRO, but I found I can't compile it with the Borland C++...
... You don't say which version of Borland C++ you're using. But, looking at the errors you posted, it appears that you're trying to compile it as a C++...
If I had to guess, I would say that you're either missing some header files or using the wrong version of the compiler (which doesn't understand the headers)...
COMO BAJARLO AL SOFT CNCPRO Yahoo! Cocina Recetas prácticas y comida saludable http://ar.mujer.yahoo.com/cocina/ [Non-text portions of this message have been...
I read something about this board a few weeks ago and decided to order one. It has an Atom processor, one parallel port, and only cost $70USD. Has anyone...
Hi Everyone, What are the chances of CNCpro for a lathe, I am a avid user of CNCpro on the mill, still purchase from Doug. Can't beat Dos for reliability ...
Hello, I am a new member to this group and just getting started in CNC. I have purchased two old machines - a lathe and a router - from a high school made by...
This thing was quite probably running a proprietary software, who knows what the commands were supposed to be. I started with a similar situation, I had a New...
Thanks Don! That was my fallback position when I purchased the unit - a desktop CNC unit with three 700 oz-in steppers, bosch router with dust skirt,...
... EMC was ported to DOS? First I've heard of that. Where did you find this? -- Member of the toughest, meanest, deadliest, most unrelenting -- and ablest...
I was wrong, it wasn't DOS it was Win95, that was at least 6-8 years ago and things can get a little foggy after a few years. I was using a hand-me-down...
It wouldn't by chance have been Master5 rather than SmartCNC? Master5 was the first and only port of emc to windows of which I am aware. It was Art Fenerty's...
  Hi friends,   First ,I am Seda Pala , mechanical Enginnering in Erciyes University in Kayseri İn Turkey,   My postgraduate (Bs ) name is " A...
Try wwww.makino.com ... From: CNCPro@yahoogroups.com [mailto:CNCPro@yahoogroups.com] On Behalf Of Seda Pala Sent: Monday, March 23, 2009 9:55 AM To:...
1) (Material hardness doesn't matter, you are vaporizing and melting it) (it's pulsed dc, you probably need a minimum off time of 5 nano sec to actually get...
Is there an software issue with the limit and E-Stop switches for both the X and Y axis? The Z axis seems to work correctly. I checked the switches and they...
Are you sure you have the right switches connected to the right pins ? And have the "sense" of the switches (Active High or Active Low) correct ? Alan -- Alan...
I tried swapping wires but it just confirmed that the only one that worked correctly was the z axis Does not explain why the E Stop fails on just one Axis...
I want to say I was thrilled to see that this source code and programming software was available. After downloading a free version Borland C++ 5.02, burning a...
I can't believe how timeous your post is. Just yesterday I brought BorlandC++ home to get it set up, dreading the learning curve, even just to the point of...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
