I have a xp laptop that cncpro will not run corectly on. I made a win 98 boot disk with cncpro on it, and after booting with that disk, it seems to run ok, but...
I'm not a "computer guy" but my inclination would be to see if your computer BIOS can boot from USB, and put the OS system files and CNC pro on a USB memory...
... You can reduce the size of your NTFS partition and put a FAT32 in the reclaimed space. Then, you can load DOS (that is, the DOS that sits under Windows...
... Hi, Randy: I've used VCom's "Partition Commander" - it's available either at your favorite computer store or via a download. If you opt for the download, ...
Partition manager available at http://www.7tools.de/ Friedrich (Rud) von Möllendorf Softselect Domicile Engineering P.O.Box 4818 The Reeds South Africa 0158 ...
... I helped a friend get around this problem. Notebook,XP,no floppy drive, and he wanted to run CNCPRO on it. I found a bootable CD image on the internet that...
M$DOS v6.22 and earlier (back to DOS v4) used FAT16 partitions. The largest allowable size is about 2.1GB so I would make it under 2GB to keep things simple. (...
I ran the programs (no cnc machine connected to the pc) from the cncpro directory on this groups files directory, after a few mins it asked fo a licence no? ...
Martin, which version did you get? If it is the last or next to last of Yeagers original prog, the pw was "password"; and you could change it later inside to...
... Hi, Martin & Rich: Passwords and license numbers are different things.... If you'll look in the files area of the list, in the user built items, you'll...
... It was not intentional. It was sent to the CNCPro mailing list on yahoo. Are you, perchance, a member of that list? If so, that would explain why you got...
Is there a manual for CNCPro? I looked, but didn't see anything that appeared to be a user guide. I've worked with TurboCNC and ZEUSCNC, so if there's no...
Hi, Is it possible to post the user manual somewhere so that it can be down loaded? Thanks, Johan ... The information contained in this communication is...
Ron, It sure looks like a compilation of a SETUP.INI file, the manual from F1 HELP within the program, and a list of upgrades and fixes. It might not be in...
Hi Rich, I'd like a copy of that manual in .doc format, please. Thanks Dave Saltspring ... From: CNCPro@yahoogroups.com [mailto:CNCPro@yahoogroups.com] On...
Jerry, I'll try again. Yahoo has been very restrictive lately. There must be new rules they don't state anywhere. This .doc is just the Yeager help notes...
OK, it uploaded just fine. I was hoping there was someone elses version. I'm not too keen on the subrutines, loops, etc. What you see is what I found, for the...
I have uploaded a small program into the Files called Gcode Converter that will convert a flat pattern CNCPro G-code file into a file that wraps onto a...
