by
this wording
-Lan Switch Middle Range -Back plane in GB 40(20 GB Full Duplex) -The equipment shall be Carrier class with modular design.
they are talking about 45xx and 65xx. the last two xx tells you how many available slots you have for that device.
The redundat equiptment can be bought independtly all the extra ethernet, cards, power suply etc, etc.
And by carrier class they are talking about nexus.. but that is super huge and super expensive by doing several VRFs without using M-BGP, cisco calls them virtualizing networks, and several networks completly isolated, each one running its own STP, and routing tables and $$$$$. very very expensive.
--- El vie 13-jun-08, Ganesh Gmail <deshganesh.akl@...> escribió:
De:: Ganesh Gmail <deshganesh.akl@...> Asunto: RE: [Cisco_CCIE_Lab] Bootloader & bootsystem A: Cisco_CCIE_Lab@yahoogroups.com Fecha: viernes, 13 junio, 2008, 12:08 am
Hi All
I want to perches the middle range switch for my organization but having the above attached configuration. Can any on tell me the model of the switch matching the above attached configuration or technical specification. Please any body now the model, tell me.
--Regards
Ganesh Deshmukh
Pune
9881499803
From: Cisco_CCIE_Lab@ yahoogroups. com [mailto:Cisco_ CCIE_Lab@ yahoogroups. com] On Behalf Of Shibi Ali Sent: Wednesday, June 11, 2008 12:22 AM To: Cisco_CCIE_Lab@ yahoogroups. com Subject: [Cisco_CCIE_ Lab] Bootloader & bootsystem
sh running config file on Layer 3 switch(6509) should show as in the following example,
boot system flash bootflash:c6msfc- dsv-mz.121- 20.E.bin
boot bootldr bootflash:c6msfc- boot-mz.121- 20.E2
But when i power up 6509 switch immediately after i purchased, and checked its running config file for layer 3, it does not show up as above.I have also attached current running config from Layer 3 switch.
What changes should i make to see as above in running config file for Layer 3 switch.
Waiting for your reply,
Thanks a lot in advance,
Shibi
|