Do you have one end set up as CPE. do you have a clock rate on that side (clock rate xxx)? ... From: Clayton Brown To: Cisco_CCIE_Lab@yahoogroups.com Sent:...
Hi all, I have enabled snmp in my cisco2900 switch. I want to receive snmptraps if anybody connects to that switch via telnet. Pls help me out. SKM ...
A small office LAN contains only one switch, which was put in place without any of the default configurations changed. You have noticed that somebody in the...
Dear Friends Kindly provide me the Config Thanks & Regds Nagarajan.L ... load balancing without using CEF redundancy can be achieved by using floating static...
What do you think yourself? This can be a very easy question if you know what happens to a cable that's looped to both port 37 and 38. Something happens...
You can use MRTG for monitor the traffic. Please let me know if you want to know how you can configure the same. ... __________________________________ ...
The port 4/37 is blocked by the spanning tree? Gordon Mac Donald <gordonccie@...> wrote:What do you think yourself? This can be a very easy question if...
Its B ie both ports will be forwarding. Since , its the only S/W , it will be Root and all ports on the Root S/W are Designated and hence forwarding , if it...
Yes sudhir, dont' know how people do there guess or think about 00.0.0.0 route to 2 isp without any BGP or cef.. I am in customerm support and used to visit...
Hi I have a working scenario like the below Central location with Channelised E1 module connected via fiber to a Multiplexer and four remote locations on 64...
Hi Dear Khaja Bhai, I believe u can monitor the link status of the Router or a switch but cannot track the activity through snmp. If you want to check who has...
I guess you may not be able to get exact time with MRTG as to when did the link go down. Otherwise it is OK with MRTG. Jayant if your company can invest on...
I heard on another board that Cisco abandoned IPv6 for the R&S lab due to a bug in the IOS. Can anyone confirm or deny this? It sounds incorrect to me....
Hi there, I m new to this group, & I need a advice for my local area network. We are going to build a network of around 124 computers & 2 servers (1 server for...
hi friend i am vijay tiwari i have some problem regarding the voice. i have 256kbs link (fider optics) 1:1 and i do not able to go thought more the 5 voice...
Thanks for the clarification,Chuck. Chuck Ryan <chryan@...> wrote: I believe this is bogus and wishful thinking..... When I sat the lab on Feb. 24th,...
Agree. Just had someone come back from RTP and IPV6 is on the test. JB ... From: Chuck Ryan [mailto:chryan@...] Sent: Saturday, March 05, 2005 1:32 PM ...
Here is my two cents on this. It's best to bundle your two links using Multilink PPP if your ISP supports this. IP CEF works only using the per-destination...
as the previous emails states, an access list with logging denied access would work. Just make sure to apply the access list to your vty ports. this is more ...
Vijay, First it depends on your codec ,if your codec is perfect , check whether you have any policy map created for RTP .If not creat a policy map and put ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
