Guys, I have tried the virtual-link, but the problem is that the serial connection between R1 and R2 is PPPoFR. The virtual-link is not showing up, and the...
Any suggestion are most welcome..guys if any one of you had faced similar problem, pls send me the case studies, that will be more helpful for me. I heard that...
hai, make sure that u r virtual link config is correct if u r virtual link config is correct it should work Antony Alexander <antony_alexander_001@...>...
hai guys, is it possible create a site to site vpn between linux firewall and pix firewall ? regards sudheesh ... Too much spam in your inbox? Yahoo! Mail...
Sometimes when you get stuck. You may want to save the config, scratch the config, and retype the config, doing everything it a step-by-step manner. Do 1...
I have heard that there is a linux cisco vpn client that you could probably use to setup a vpn client connection with network extension. If you need a site to...
Yes, run racoon on the linux box. there are sample configs if you look on google. GL -Rob ... From: sudee raj To: Cisco_CCIE_Lab@yahoogroups.com Sent:...
hi AA, send me the config i will check and let you know your mistake. cheers! Antony Alexander <antony_alexander_001@...> wrote: Guys, I have tried the...
Hi It is very much possible to run vpn between Linux box and Pix firewall. We would need to run the vpn client on the linux box, which would intiate a session...
Dear All, I'm planning to upgrade the pix 515e from 6.3(3) to 7.1. I have a couple of site-to-site vpns running on them as well. I would like to now, are there...
Hi Guys, I hope all of you are doing fine.I have a doubt regarding load and reliability metric used in EIGRP.By default we dont use these parametes but if we...
HI Yes, it is possible. Regards RC sudee raj <sudheesh_mr@...> wrote: hai guys, is it possible create a site to site vpn between linux firewall and pix...
hello I used to work with Cisco IP Phones and the Only three things I saw why an IP phones reboot are the followings: 1.- If they Lost conectivity to the IP...
Hi guys, The cisco vpn client does exist and I have infact used it to create vpn tunnels with cisco's concentrator but site to site vpn cannot be created with...
Hello I found in the Web a doc how to create tunnel between PIX and Linux, just use google and search it, I have no time to test it, so best luck Michael...
Load of Eigrp Link is usually the Tx load of an interface as u see in the sh int status Reliability idealy has to be 255 for a good reliable link Dinesh...
Hey..thx for your reply.. Actually i am a Data guy, used to work mainly with Cisco equipments but have a fair understanding of voice (acd, call managers). As...
Where the Nortel PBX system is located. is its in same LAN or located in remote location. Nortel phone sends a broadcast to contact the itg card and then...
Yes it is possible to create a site to site vpn sing ipsec betwwen a linux firewall and cisco PIX.We had done that in the past but its not very stable.For...
Hi Sudhir, I think i was not able to express my doubt clearly.Let me ask it in another way. In IGRP, matrix consists of load,relaibility,bandwidth and...
PBX located at remote end, i had checked there is no issue with media and network topology... seems it is purely nortel issue..becoz i had done few few test on...
Your qt has two ans With autosummarzation enabled the load and the reliability is the status of the outgoing interface only With auto summarization disabled...
thx sudhir.It would be great if you could provide some link at cisco stating the same. Regards Dinesh Sudhir Menon <vsudhirmenon@...> wrote: Your qt has...
Dear All, I am stuckup in uploading the IOS on Cisco Access point 1231G. The Problem is due to some reason the IOS was corrupt and the Access Point was not...
I only think that problem should come from conectivity, had you checkeck Switch Log, perhaps some interfaces compatbility between the IP Phone Ethernet Port...
Hello, Any one in this group intrested in group study for Voice track?? i am in riyadh Saudi planning to purchase & share the rack with someone serious in lab...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
