HI I have 2mb leased to internet, customer asking me to allocate the bandwidth by percentage basis to users ..is there any way to do that in Router .(2801...
It depends what kind of platform you're working on, for the CPE the max-bandwidth allocation is 75% by default, so you can chnage it through this command and...
Hi friends I have 4 routers in AS 400(R1,R3,R4 &R5) and 1 router in AS 100(R2). The router R2 has 10.50.50.0/24 <http://10.50.50.0/24> on its VLAN. Advertise ...
Hi friends I have AS400(R1,R3,R4 &R5)and AS 100(R2).The router R2 has 10.50.50.0/24 on its vlan. Advertise the n/w 10.50.50.0/24 to AS 400. When this n/w is...
area area-id filter-list prefix prefix-list-name in or area area-id range ip-address mask not-advertise <BLOCKQUOTE style='PADDING-LEFT: 5px; MARGIN-LEFT: 5px;...
how this helps when the network is advertised via BGP???? Chula Bandara <chula_bandara@...> wrote: area area-id filter-list prefix prefix-list-name in ...
Hi ALL, Need some good documents in configuring the policy routing in cisco 2600 series router. Pls anyone help me in getting this. Thanks & Regards, Ashish ...
hi, you can use class based bandwidth allocation .,. If IOS support... make ensure that your cisco IOS shoud be 12.1 higher. regards Sivam krishna mohan...
how many logical channels will be there in E3..will it support by 3600 series .can i use all that logical channel or total as one I need this info immediate...
hi, I can give you solution, provided I need topology show running-configand show ip route information on both router. best option you can use route-map.... ...
Hi, Presuming you are talking the AS's of BGP protocol ( Not EIGRP), you can not define the routing & update policy of AS 400 unless you have the Admin control...
Hi all, Could you please advise me with some tricks on how to troubleshoot Packet loss and latency. I receive oft calls from the customers reporting this...
hi, Did u find packet drops when u did an extended ping(with datagram size as 1500 and packet count as 100 or 1000)??? If yes, I would have traced the path...
correct.U can advertise the network by attaching "no-export" community..but that is going to work only if the administrator of AS400 is not removing ur...
IF you are looking for cheap solution to extend your LAN , RAD product RICi-E3 is gud option. Just 1/3rd price of cisco. I have done bentchmark test for cisco...
Few troublshooting commands: loopback local loopback network line loopback network payload loopback dte depends which software version you are using. pushkar ...
Hi Krishna, Its very easy to configure, don't be afraid from E3 card. Its like simple serial card. You have to configure encapsulation HDLC or PPP. If you are...
thanks alot for ur info I just want to know wil the 3600 series router wil support logical channels..because when i read the manual it is saying supports clear...
http://www.cisco.com/en/US/products/hw/iad/ps492/products_installation_and_configuration_guide_chapter09186a008007e10e.html#2391 check this out for the async...
Hi all.. I have 2 routers connected back to back with a DCE/DTE cable from S0 to s0 interface. If i turn on the Authentication for EIGRP, i dont learn about...
Hi all, I have a 1751 Router at a remote location in my WAN network. IN the last 7 months, i have lost my configuration atleast 4 times. COnfigurations simply...
for more info check, http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a65a5.shtml Regards, Santosh Kumar. bsrambabu...
Hey Murty, I think it is not power supply issue. have you saved your configuartions? .......if you are loosing your configurations even after saving it, then...
Hi Sanastra, Thanks for the reply. I am very clear of the config-reg values and related stuff. Config-reg value doesn't change. But the configuration stored in...
Hi, Any way to prevent the user (Lab studnet) occasionally remove the Flash(including ios) while they type the copy running-config startup-config wronly? eg....
A bicycle chain usually works after the 1st application on the lab student. ... From: Cisco_CCIE_Lab@yahoogroups.com [mailto:Cisco_CCIE_Lab@yahoogroups.com] On...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
