Hey y'all, I was wondering if this pulse transformer, http://www.allelectronics.com/cgi-bin/category.cgi?item=PXR-3 , can be used in my transport. The...
Gary, Thanks for the link....interesting links. The newer CDROMS are built using plastic castings instead of aluminum on the older NEC drives....but the newer...
Apparently its not navigable directly, go to http://www.geocities.com/agalavotti/indexeng.htm and then scroll down to volume controls. ... controled ... to ......
Most digital volume controls work on a 3 wire serial interface, look at CS3310 for a simple example. http://www.cirrus.com/en/products/pro/detail/P2.html ... ...
I used 50 ohm line to my amps and a 50 ohm line to the top board. I dropped in a 50 resistor across the input to the top board...Worked real good! Phil...
... Theoretically carbon resistors will create more thermal electrical noise then glass resisters. I have had the opportunity to measure that but the amount of...
I recently added a digital input transformer to my 2nd DIO. Digikey was out of the 1:1 transformer that I used on my first DIO, so I ordered a 75ohm:110ohm...
I agree that the idea is to boost the signal level coming into the DIO, similar to what was mentioned in the previous note. As to whether or not its better to...
i have a stock nec cdr 602 and a modded art dio, but i don't know what setting on the tree switch i should have? also, what quick and easy mods could i do to...
There is a buzz (yes another one) on the Audio Asylum about how this $60 clearenace item is causing some people to consider replacing their CEC belt drive...
PeAK, could you do us (at least me) a big favor and compare the Ack Dack to the 3950's analog output? The Asylum folks are raving about the 3950's analog...
I just did some mods to my ART but am now experiencing some weakness in the right channel. The right channel has much less volume than the left or maybe the...
No problem Charles...as I have been meaning to do so. Before I get down to the comparison of the the Internal DAC of the 3950 to the 3950 used as a transport...
Hi guys, My dio has been wonderful for the past 6 months, replaced all the resistors, shottky diodes, main caps...all is well. Last night I decided to finally...
...thanks for relieving my Tosh post that has sat orphaned for the last 12 days. Their are a number of posts on this forum talking about "flat" sound after...
... <snip> ... about the smaller ones. Mine was much improved after replacing the "main" caps i.e. all the caps next to the diodes. ... value ?, 100pf ceramic...
I guess I'm a product of the Linn school...fix the upstream source first. In the case of CD playback, it means the DI/O. I have a new Toshiba 3950 transport...
Thanks Peak for your continued work with the di/o and keeping it alive. I think I'll head over to BB this week and pick up the tosh. Though the NEC I have...
I have a friend who brought over the Bolder power supply with the Bybee inside. We compared that against the Rat Shack wall wart. Basically the Bolder supply...
I have 2 DIO units. Thinking of mod. those 2 units to be mono. blocks for Left and Right channel seperately and produce balance o/ps. SPDIF using a 2-way 75ohm...
I have a Bolder PSU, but no Bybees in it at this point. Here is a link to the Modright site, where the owner describes his experiences with, and how to employ,...
Am I correct in saying that the voltage divider image shown here http://home.ca.inter.net/~cfraser/DIOanalogplug.jpg is incorrect in the way the resistors are...
It really depends on which way the signal is running. It would be correct at one end of the cable (from the DI/O to the preamp), but not the other. His arrow...
The two resistors are in series. The divider in the picture was intended for 7v power comming out of the DIO's analog phono output into the phono plug in the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
