Dear Members, I got the Dac two weeks ago and. First I played it in stock form, it produced some pops, crackle sound even in lowest level. I then tried to...
The first suggestion that I'm sure anyone here will make is to try the different switch settings. The pops and crackles sound like jitter of some sort. Did you...
Hello, Thank you for your advice. I did try various settings on Dio, including external synch you mentioned but the problem is still remaining!.. Regards. ...
Some hints: a) Try another known good transport that is known to work with the DI/O. b) Borrow a "known good" DI/O The DI/O is very good at picking up...
Truth to tell, I'm no DIY guy, no matter how much I try to convince myself. I bought a NEC CDR with the intent to mod it to use with a DIO. Can anybody point...
Hi: What are you trying to do, feed the DIO from the SPDIF output of the NEC? If so, get one of these: http://www.cablesnmor.com/digital-cable.html and change...
I picked up the CDR about 18 months ago, when a lot of people (Positive Feedback magazine, Audio Asylum) were touting them as being great transports for only...
Has anyone looked into the best configuration to use an AES/EBU signal to feed the DI/O? In this case the signal is coming from a Behringer digital equalizer. ...
Hi all you dio freaks is there enyone who have a dio that do not make digital noise/interference and what did you do to get rid of it i use 2x echoaudio layla...
I know there are numerous mods to the Toshiba 3950. However, if I am using the 3950 only as a transport thru the DIO, which ones would be relevant to me ?...
I would say 2 things about the Toshiba and the DI/O: (1) The Toshiba, as a transport is probably OK, but JUST OK. You can get much better results with a better...
Thanks Bob, that was a pretty detailed reply. I will definitely have a look at your site. My DIO at present is unmodded, so judging from your reply it looks...
I am looking for a Stancor STA-5790 type PSU for use in the UK. 240VAC to 9VAC Mains Adaptor, 3.4A or higher, Wallwart or Desktop. Does anyone know make, model...
mite wanna yust leave the digital input resistor stock - it's awreddy 100 ohms. as the dio is a pro-audio piece of gear, i'd hazard a guess that it's awreddy...
i'd search ebay.uk. but, i would also consider yust getting a 120v iteration & using a step-down transformer - i got better performance w/an isolation...
Take a look at Henry Wilkenson's off the cuff remark about the DI/O, below: http://www.audiophilia.com/hardware/hw1.htm P.S. The DI/O with the help of OSCON...
For those of you who have problems with the 7V (RMS) output of the DI/O, the ideal solution would be to use a simple passive preamp. The link below outlines a...
Nothing at Maplins, RS Components or the usual places :-( Someone somewhere said that there is an Atari PSU that will do the trick. But don't know model...
The Atari PS that everyone metiones is available from Hosfelt: http://www.hosfelt.com/ Look under Adapters from the menu on the left and then select 7 - 13.7...
Thanks Gary ... From: gbronn To: DIOmods@yahoogroups.com Sent: Sunday, November 07, 2004 8:13 PM Subject: [DIOmods] Re: Power Supply for UK ?! The Atari PS...
Hello, You may consider this PS http://rswww.com/cgi-bin/bv/browse/Module.jsp? BV_SessionID=@@@@0629961190.1099910008@@@@&BV_EngineID=ccchadcmmkffilk ...
Thanks Chuong. It is only 2A but looks well built. Does these things have anything more than a stepdown transformer inside? ... From: chuong_h_l To:...
I have just purchased the ART DI/O and joined the newsgroup. There are a number of mentions in various postings of a DIOFAQ that describes the modifications,...
Hi, I just opened the PS last night and there are one Stepdown Trans, one diode, and two resistors. I exchanged the diode for 11DQ10 type from Int Recs and the...
Thanks Chuong for taking the time and effort. I am far from an electronic expert. What are the diode and two resistors for? Thanks ... From: chuong_h_l To:...
Hi, I saw Diodes, Caps or Resistors ... after the Trans in every PS unit, I think these components for producing good signal output?., I am not so sure. But...
Hi I bought mine just few weeks ago. Second-hand from US. It was claimed to have some mods by Mensa. Diodes, Caps or Resistors could be a mains filter. I put...
Thanks Artioneer. I have sent you an email. I have found in the past that use of ferrites is effective in filtering out EFI and other interferences from AC. ...
Hello, So far, I have been unable to get the external sunc to work on my Dio. I am taking PCM digital audio out of a Toshiba 3950 player. The other settings...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
