mite wanna yust leave the digital input resistor stock - it's awreddy 100 ohms. as the dio is a pro-audio piece of gear, i'd hazard a guess that it's awreddy...
i'd search ebay.uk. but, i would also consider yust getting a 120v iteration & using a step-down transformer - i got better performance w/an isolation...
Take a look at Henry Wilkenson's off the cuff remark about the DI/O, below: http://www.audiophilia.com/hardware/hw1.htm P.S. The DI/O with the help of OSCON...
For those of you who have problems with the 7V (RMS) output of the DI/O, the ideal solution would be to use a simple passive preamp. The link below outlines a...
Nothing at Maplins, RS Components or the usual places :-( Someone somewhere said that there is an Atari PSU that will do the trick. But don't know model...
The Atari PS that everyone metiones is available from Hosfelt: http://www.hosfelt.com/ Look under Adapters from the menu on the left and then select 7 - 13.7...
Thanks Gary ... From: gbronn To: DIOmods@yahoogroups.com Sent: Sunday, November 07, 2004 8:13 PM Subject: [DIOmods] Re: Power Supply for UK ?! The Atari PS...
Hello, You may consider this PS http://rswww.com/cgi-bin/bv/browse/Module.jsp? BV_SessionID=@@@@0629961190.1099910008@@@@&BV_EngineID=ccchadcmmkffilk ...
Thanks Chuong. It is only 2A but looks well built. Does these things have anything more than a stepdown transformer inside? ... From: chuong_h_l To:...
I have just purchased the ART DI/O and joined the newsgroup. There are a number of mentions in various postings of a DIOFAQ that describes the modifications,...
Hi, I just opened the PS last night and there are one Stepdown Trans, one diode, and two resistors. I exchanged the diode for 11DQ10 type from Int Recs and the...
Thanks Chuong for taking the time and effort. I am far from an electronic expert. What are the diode and two resistors for? Thanks ... From: chuong_h_l To:...
Hi, I saw Diodes, Caps or Resistors ... after the Trans in every PS unit, I think these components for producing good signal output?., I am not so sure. But...
Hi I bought mine just few weeks ago. Second-hand from US. It was claimed to have some mods by Mensa. Diodes, Caps or Resistors could be a mains filter. I put...
Thanks Artioneer. I have sent you an email. I have found in the past that use of ferrites is effective in filtering out EFI and other interferences from AC. ...
Hello, So far, I have been unable to get the external sunc to work on my Dio. I am taking PCM digital audio out of a Toshiba 3950 player. The other settings...
Yeah - you could have the settings on the Toshiba incorrect. Try it both ways, but be sure to recycle the DI/O (unplug then replug) after you switch it in the...
Bob, Well, I did what you mentioned. When I set the cd-player going and then unplug - plug the DIO, the external sync works. However, it seemed irksome to...
Also, I don't think a DI/O will sync with DVD audio, if that's what you're trying to do. -- Tom ... __________________________________________________ Do You...
It's always good to solve a problem successfully and without added cost and frustration. Enjoy the DI/O in its raw state, but keep in mind that this little...
Blue, My apologies for any confusion but the only power supply that I have for sale is the get-u-goin' boxed Super Ninetendo NES - 002 (GBR) one. If you are...
Artioneer, Super Ninetendo PSU is only 1.3 A. I tried to find Yoymax Transformers Model : TRF - 80872 - 09 on the net. But no luck :-( Do you know a supplier?...
... Blue, It has been said that higher voltage supplies overload the regulators but I've tried a few 12 volt ones without any problems eg: Creative Electronic...
Hello, Well, I got the external sync working and removed the tube from the DIO, I think I noticed an improvement in sound after the removal of the tube - bass...
Try turning the knobs on the front of the unit. This will help alleviate the LED's and have no effect on the sound at all. Once you go into the unit and begin...
I don't know what happened to Craig's FAQ site. Hopefully its only down for maintainance. Until then, you can use the Internet Archive to find an old copy....
Hi all, I've recently purchased a DI/O and am expectantly awaiting delivery so I thought I'd introduce myself and start planning my first tweaks/upgrades. I'm...
Instructions and photos for making a high quality 9VAC PSU is now at http://groups.yahoo.com/group/M-Audio_SuperDAC_2496 It can be made for both UK and US...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
