--- In DIYGasTurbines@yahoogroups.com, "supermanbrfd" <supermanbrfd@...> wrote:
>
> hi guys had a little sugery had to put engine off for a while it kinda sucks
getting old but my toys make me feel young. so it kinda evens out anyway need
advice my can is 18 inches long 8 inc diamiter flame tube is 6 inch in diamiter
have 1 pilot nozzel drilled am 1/64 hole then i added 4 fuel nozzels driled at
1/64 burner has great swirl plenty heat but fire comes out about 3 feet behind
can the way i tested it was to put leafblower in the intake light the pilot
addfuel turn on leafblower and get sustained combustion then i turn on fuel
nozzelsand it really gets wild with about 3 feet of yellow and blue flame today
i bought about 2 feet of 2x3 inch rectangular tubing gonna make a 90 to connect
my burner to my vt50 turbo is the flame gonna be aproblem or am i worried about
a small issue and what can i do about it by the way at this time pilot and fuel
nozzels are ran off of propane with crawfish burner regulators . p.s. itll boil
water in a crawfish pot in about 2minutes thats about 8 gallons of water wit
flame directed at side of pot
>i added the 2x3 pipe havent bent it yet and fire came 2 feet out of it thanks