Hi Eddy Which one of the GT45 family http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT45/GT4508R.htm have you got , depending on the...
one of the reasons that a tractor has little trouble with any oil is that the volume of oil is considerable with large area and small porosity oil filters and...
Why don't you just try15w40 oil non synthetic we use this oil in our tractors and combines with good results . We get many thousands of hours of use out of...
now i was checking on gt 60 dont know about them but maybe people will answer me and guide me to a goor road eddy mothman1956 note if you have aa chance go...
Hi Eddy Theres nothing wrong with ball bearing turbo for our use , the reputable turbo manufacturers wouldn't put on the market a product that fails , they'd...
what i am scare with bearing is the fact that they are bearing , everything is in contact and there a lota thing at +130k rpm they have to be well balance they...
Both numbers are indicators of viscosity at different temperatures. Take a 15W-50 oil. The first indicates how thick the oil would be at winter temperatures,...
ok so what weight should i aim for? what is the main difference between *w-30 and *w-50? i know the first number is kinda the thickness... would some 10w-30...
Hi Jon Yep , I'll go along with that , I used 15W-50 semi synthetic in both bike and kart , a little harder getting spooled up , and a little more of a wait to...
Hi Eddy On my kart with its direct drive using karting chain and sprockets I used a 10 tooth freepower sprocket driving an 81 tooth on the axle , you might...
Hi Eddy Any of the Garrett GT turbos with a number ending in "R" have ball bearings and will require less oil for lubrication than a "brass bush" bearing...
thanks all!!! unfortunately i cant order from mc master since i'm in canada... heh! i'll give the exhaust paste a try i guess. and ok i'll look into that kind...
thanks all!!! unfortunately i cant order from mc master since i'm in canada... heh! i'll give the exhaust paste a try i guess. and ok i'll look into that kind...
hi,i used to use 0w30 oil but now use 15w60 oil,really not that bad spooling up at all. it is quite expensive through!!i use it because the place i got my...
Until he wrapped the coil the only thermal transfer area that he had was conduction via the line contact of the helix of the coil. Considerable length, but not...
Yeah, but he's using propane not kero or diesel. The LP is going through a phase change from liquid to gas and getting really cold as a result so he's getting...
Yeah, that's funny, I thought the shurflo was the pump to have. I was planning on buying one for oil, but now I'm not sure. I have a smaller turbo though, so...
http://www.rcdon.com/html/gr-1_turbojet_project_2_23_04.html if you want to warm your fuel and cool the oil at the same time here is a creative and simple way...
ohhh i see... so my 125$ pump isn't doing the job... D'OH!!!! i think i'll try with thicker oil... or this winter i could replace the shurflow pump with a...
I think you could build a heat exchanger that wouldn't restrict the flow too much on the drain. That commercial one might be too much restriction. I think if...
i know i supose to read but i have so many things to do at the same time . i like to know what ratio do you have ono the transmition of your go kart eddy thank...
Perhaps I've not made it clear that the proposed coil would be on the outside of the CC, NOT in the inside? It would only be on the end plate that the FT is...
Turbochargers >GT45 Family > GT4508R - 742581-4 i foung this turbo that catrpillr put on there engine i like to konw what you people think about it and since i...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
