All photos were taken with a 127mm Apo refractor and DSI II Pro. The images were 50x1min exposures, stacked and drizzled in Nebulosity. The only exception is...
I gave my new (to me) Mallincam a quick run last night, and took some images with Deepsky Imaging. I managed to capture some TIFs, but there seemed to be some...
I decided to leave my setup out to the next day after a night test driving my Mallincam, so I was able to locate Venus while it was near the meridian. Zeiss...
HI to all,when I press the ''settings'' in the envisage,message of error,saying that a error ocurred,giving the options to continue or quit the program. Does...
The Moon was 38% full on this image-taking session, but it came out better than my photo last year, which I took with a DSI Pro. Longer exposure time of 120...
http://tinyurl.com/lo69xo Here is the direct access to my photo of M63, the Sunflower Galaxy. This was taken during a 38%-full Moon, so it is a little washed...
Hi list, Just a quick note to say- we did it! All 18 new PSI-2 tutorials are finished and streaming at IP4AP.com. We'll go to DVD, available from OPT and AVA...
http://tinyurl.com/qhmawy Above is the web site for my latest photo, M51, the Whirlpool Galaxy. Taken with my 7" Mak & DSI-Color camera, 29 frames at 2 minutes...
The June 2009 issue of AstroPhoto Insight Magazine (Volume 5, Issue 3) is now available. In this issue you'll find: * The Five S's Part 4a: Select Warren...
http://tinyurl.com/na5547 Taken last night with only 4 Frames, due to clouds chasing me away early. I think it came out pretty good, considering the low number...
Hi everyone; My DSI III has malfunctioned. It does not download an image properly to the PC. It does respond to light, but I can't get an image transmitted to...
Hi Bill, where are you living? I had to send my DSI II to Meade in Germany, from the UK, for an out of warranty repair - they exchanged it for a new one and...
Greetings fellow APers. Just got my new (used) Meade DSI-II Color and just as soon as the Arizona monsoon clouds clear, I'll be imaging with my WO ZS-66ED....
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Deep-Sky-Imager group. File : /Meade...
Deep-Sky-Imager@yahoo...
Jul 17, 2009 2:35 pm
17822
Wow! membership in the group is 1,584 DSI folks and so far this month, only two posts? Surely more people are active in this group? No? Bill...
Good morning, Bill; There are a lot of people out here, yes. Many of us are learning about Deep Space Imaging and how to auto-guide or even just "guide." ...
Hi group,I bought a adapter cable from Radio Shack and the computer and the telescope will not communicate.It wont open the com port.I called Meade and they...
... This is off topic for Deep Sky Imager because none of the Meade DSIs have an RS-232 serial port. By "cable" did you mean a USB to RS-232 serial adapter?...
... Sorry I didnt realize this was off topic.Thank you for your reply.The DSI did not come with the adapter cable.I did install the drivers.It sounds like I...
... William, I disagree that this is off topic. The DSI doesn't come with a serial port, but the software that comes with the DSI uses a serial port to...
... You need two things to hook up your computer to the telescope. An RS-232 serial port, and a special cable. If you don't have an RS-232 serial port, then...
Bruce, Thanks for your expert help! One must also know how to determine which com port is in use to configure the Autostar suite communication settings, since...
The 33rd annual convention of the Virginia Association of Astronomical Societies (VAAS)will include fantastic speakers, door prizes, vendors, swap tables and...
I would like to know how to park an LX200 if any one here has one and has an observatory could you tell me how you do it? Dose it make it so you don't have to...
Hi, Dan; The PARK feature is available on the LX200GPS and later models. I don't believe it is available on an LX200 classic. I park my LX200GPS before...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
