HI Paul, thanks for the response, that would be a great help, certainly on my 1290 the curves are pretty unusable at the minute, I seem to have the same...
... Both were NMC. In the first one, I installed Cone's archival color inks which worked briefly, but then began to clog. That was about 2 years ago. I then...
... Actually, that wasn't the case. The prints were at least 8" wide. With the original CIS, the tubing was just a little too long and I solved the problem...
I just spent some time at the Epson site searching for a certified repair site in Indy for my dead and out-of-warranty 1280. Didn't find anything. I know...
... Thanks for the compliment, Antonis, but, as you may have recognized, my English is far away from being perfect (see the missing "n" in the quoted sentence...
I´m wondering if this device would allow me to jump into grey profiling with IJC?? Any experiences? (We have one on ebay over here in Germany, Item # ...
Antonis: The behavior of the Ink Jet Control application does not seem to conform to the traditional prepress standards for ink limiting and I am trying to ...
Bernd, The Kodak densitometer also for sale at .de looks very much like the X-rite 810. That's the one the others mentioned. I've seen the X-rite 810 in more...
I modified the default Epson 2200 "Cool" profile (provided with the OPM download) using IJC by adding a light magenta curve (original profile only used matte...
I also have a banding problem in the deepest blacks with OPM. My 2200 does not show banding in the same file using the Epson driver. I will test it on the IP...
... Roy, OPM seems to print faster (single pass mode) than Gimp-print at Highest Quality, but I haven't done any timings. OPM only offers two printing ...
http://www.arditos.com/epsonprinterrefurbishment/ IMO, worth the cost & wait of shipping to these guys. You are probably looking at only 2-3 days ground each...
... is ... Banding in the blacks could be an indication of ink starvation. I've seen this while finding the best media type in the epson driver for certain...
... From the MIS web site: "For the C70, C80, C82, 2100 and 2200 printers, a chip resetter (SK168) is available and the Epson cartridges can be refilled....
Nick, thanks for the thoughtful review of IJC and its unique "take" on controlling ink. I agree with you that if you see it from a traditional prepress...
... like ... printer. ... Thanks for the hints, Ernst. The 418 went away for about 500 $$, pretty much I think. I had the same thoughts as you about the Kodak....
Thanks Frank..... I will soon upload Carl's revision of the cool profile which should offer a further improvement over mine. I just wanted to do some ...
... <ruhrfoto@y...> wrote: ... Bernd, kidding aside, have you read the manual? I'd be happy to explain - in "plain" English - if you'd like. And... frankly,...
... I've also successfully refilled several of my cartridges with their ultrachrome compatibles. I used the procedure on this page: http://www.digital4to.com/ ...
Here's another Authorized Epson Service Center....in Hackensack,NJ. Very good people. www.lagunaservice.com bgs...Barry S. ... From: "Barry Kelsall"...
... make it a ... Dear Antonis, this is a can of worms and I don´t know if we should open it. Buying American products in good OLD Europe today could easily...
please do apologize, that I never answered your personal e-mails, you sent to my yahoo mail account. I completely forgot it exists. Today it was the first time...
Antonis and Frank: Antonis, I tested with black-only through the Epson driver. No banding. Is it possible to test a black-only profile through OPM without...
... That is actually the problem I am having at the moment, I'm setting the ink limits too high (choosing the wrong step obviously), and the ink is running off...
Helene, and Frank I'll forward this to the people at Bowhaus and see what they say. Of course, you too can contact them directly at: software@... When...
I have prints that are coming out odd sizes-maybe 1/2 inck shorter on one side, plus the added visual of banding. I took it in and the guy said it was fine.All...
<<MIS is sending me a 1280 and a production run of Ultra Tone inks. So, maybe I'll be able to tell what is going on with that platform and the production UT...
