With the UT7 inkset you can use C and M as PK inks. On Epson Premium Semigloss that gives you around 2.3 dmax. -- Daniel Staver http://daniel.staver.no...
For several reasons related to my non-photographic life and some initial problems with incorrect profiles my 2200 set idle for about 9 months with an...
Hello Ernst, I have read your detailed instructions on how to refill the 10K carts, on the Wide Format group. As far as I understand, they should be applicable...
Greetings All, I am looking for a used 7600/9600 in good working condition, preferably in the Toronto area. I will likely be using it mainly for parts,...
... again. ... The printer pressurizes the carts, there is a small air pump within the printer. At least this is true for the 10K series printers. Anyone want...
They hired Wilhelm to test the inks before they announced the printers and the data is on his site. The HP pigments had been rated much higher than Epson in...
... The ink bag is enclosed in the cart and the space around the bag inside the cart is airtight. There's an air inlet to that space at the same side the ink...
Ginny, I didn't mean to be provocative, sorry. If your marketing's grooved into 11X14 for some reason (economical frames/mattes?), and if 11X17's not...
If this http://www.wilhelm-research.com/hp/PhotosmartProB9180.html is the Wilhelm test that is being used for support, I don't see anything that is all that...
Thanks for your comments. As a clarification, I didn't mean to assert that 11X17 is not satisfactory. I use that size a lot. It is readily availalle. I asked ...
Don't know if the HP mechanics will pan out or not, but it is worth watching I know that. Every since Cone started using carbon pigment for quad prints and all...
... Very true. I have mixed feelings about the built in spectro. You do still need to let the ink dry before measuring it, so having it built into the printer...
Greg, I believe the profiling can be done in two stages-print the target, take it out & let it dry, then continue with the reading. I hope it works with 3rd...
Greg, I belive he is right. They say 20 minutes from start to finish if you do it in one step. But they have already incorporated an easy two step process into...
... Well that would be a vast improvement over what they offer in the DJ130. I wonder if you can easily get the reading back out, and what kind of different...
Well that's true and if it all works well very cool. However, if youare like you and I and have more than one machine that you work with you still need a...
I'm trying a new inkset in my 7500 as a way to simplify my life and, hopefully, cure the tone shift problem I've experienced in large format printers running...
I don't believe that you can get anything out the measuring information. Looks like it is all done behind the scene. Although they aren't saying this directly...
... It has a calibration stage where all the inks are measured by the internal Eye One with UV filter. 10 minutes. After that a profiling step can be done...
It's hard to image HP spending that kind of r&d money and making that kind of an alliance with Greytag and Hahnemuhle if this spectro thing didn't function...
Don't forget that you can use all 4 blacks when printing on matte paper. That may help you smooth out any rough spots down near full black. To smooth out the...
Ernst- Do you know whether or not you can choose rendering intents when you print with the built in profiler? I read somewhere that you could only use...
Hi Paul Thank you for this trick. I have complained in previous posts that even though the BW prints using ABW mode and full colour ink set are very good, I...
... That would surprise me very much. You don't add CM hard and software to a printer and cut 3 fingers of its right hand after that. It would be a very...
John, ... MIS's general business model is to supply whatever the market wants. The only thing in my current setup that is not a current MIS ink is the UC LM. ...
Greg, ... Yes, that is what I do. ... The straight LLB is smooth enough for the highlights. I have found the major improvement in this approach over my...
Peter, ... I was so impressed with the 2400 Y=Carbon approach that, as you can see from other posts, I've switched my large format approach to the same basic ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
