Hello, I have ETX 105PE. Recently managed to buy a Meade's 3.3 Focal reducer, but without the variable T-Adapter. So my questions are two - to connect the FR...
... If you were being challenged for your password, you can use the "back" button on your browser to bring the filled-in screen back into view. *Then* use...
... Oddly enough, my first attempt at replying to this note had a problem, too. Yahoo didn't return with the "your reply has been posted screen". But i use...
Yes you will need the Meade 07036. Celestron also sold these for the C90. They called it a Large Accessory Adapter (LAR). Appogee used to bring one in from...
Thank you very much Geo! I'll buy one ETX to SCT and one low profile SCT to T. I already have the Meade #64 adapter so I'll have small extension tube because...
I've finally managed to get inside my ETX arms and located the problem. It seams fairly obvious that I need a new right OTA support as documented in the ETX...
Find a friend with a lathe. The hub is no big deal and the arm looks like a reworked standard channel extrusion. The hard bit is broaching (cutting) the keyway...
Hi George, thanks for your detailed advice. I am a practical person but metal working is not something I have any experience with or know anybody with the...
I haven't been able to image much lately and since I also have a DSI Pro that I use, I've decided to part with my DSI Color. I've put it up on eBay and thought...
I just purchased an ETX-70EC on Ebay and the unit malfuctions. The servo motors function but I cannot lock the Dec axis clutch to engage the servos (the Az...
I just received an ETX-70EC that I purchased on Ebay. It was malfunctioning when it arrived; the scope if free moving in the Dec/Alt axis. The servo motors...
... There are a few things that can go bad. The threads in the right tube trunion can strip as can those on the clutch knob. But it sounds like these are OK. ...
... somebody ... that the ... notch ... free to ... this ... greatly ... You can post photos by attaching them to a message. You have to upload them to group...
... somebody ... that the ... notch ... free to ... this ... greatly ... Now guessing from your description you are talking about the part of the Dec trunion...
Hi George. Thanks for the reply. I took it apart (you don't want to know how) and the gear that should engage the worm gear is frozen on the plastic shaft. Not...
Does anyone have a source or know where I can find an adapter to use a standard 1.25" diagonal on a Meade ETX90 or ETX125? Scopetronix use to have them - they...
I used to own an EXT-90 and recently a person with a new ETX-60AT had a couple of questions for me. I'm not that familiar with the 60AT but back when I had my...
Don't know if this will help you but the Orion 1.25" diagonal #08295 that came with my short-tube 80 threads directly onto the back of my ETX125. Phillip...
Yes, the #497 AutoStar (has number keys on the keypad) works on the ETX-60/70/80/90/105/125 as long as it has a reasonably current ROM (since the ETX-60/70 was...
Thanks, Â Bil H. ... From: Mike Weasner <etx@...> Subject: Re: [ETXASTRO] Autostars on ETX90 and ETX60 To: ETXASTRO@yahoogroups.com Date: Friday, May 1,...
You will most likely need to perform a Setup/Telescope/Calibrate Drives (you may have motor runaway or "Motor Unit Fault" messages if you don't), and you'll...
Thanks George, the image showed in the email for me so I assumed everybody else could view it too. Anyway the image of my damaged right OTA support (I think)...
David, I have wanted to do the same thing, I decided to go the LAR (Large Accessory Ring) route, these have been made for various smaller catadiatropic scopes...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
