Yep! I got two for $2 each, seemed like cheap cabinet, and just the right size. I'm not like some other researcher(s) that seem to have unlimited resources,...
I use the 469 as a tuner in some boxes, I remove and throw away the processor board, and use only the radio board with external sweep--no clicking! Frank-s...
"Too bad the interest in EVP doesn't pick up while that ghost hunting mentality drops off." What exactly do you mean by the statement above? I ask for...
$2 minus senior dicount 20%. I think I'll put 47 in this one. Frank _________________________________________________________________ Windows Live™: Keep...
No, it's a piece of cake. Here is the link i made to the hack. Scroll down, it's at the bottom of the page. It should take no more than 5 minutes to do. ...
I don't communicate well, but anyway--It seems to me there is an excessive focus on the negative, at least in the media. Its' thje scary haunting that get the...
I made a similar device using the same voice chip, and no dictionary. I used the random voltage generator from the boxes to make a random number gnerator, and...
All made in china, so good luck with a schematic. You can use a meter or scope to trace the VT lines. I did that with the older 470, and one could inject an...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the EVP-ITC group. File : /Frank's...
EVP-ITC@yahoogroups.com
Apr 2, 2009 3:08 pm
13583
Well, if I could draw this stuff accurately it might help. There was some mistakes in the random section of the sweep circuit. So I replaced the sweep...
Frank, you have hit the proverbial nail on the head! Fear and sensationalism sells, that says it all. There are a lot of sheet scams out there to give out a...
Just wondering if there would be a demand (desire) for something like a universal sweep board/kit, and are there many out there that could assemble it or use...
On the 469 schematic, I left off the power on resistor, and I made a few more changes to the sweep circuits. Frank-S To: EVP-ITC@yahoogroups.com From:...
To save space on the circuit boards, get rid of the op amp input biasing resistors and use a fixed regulator in stead. I haven't tried this yet, but it seems...
Well both of these were from the group, so I think you did it right. ... _________________________________________________________________ Rediscover...
Hey Frank, I found this external sweeper circuit in a book, and I believe it to have a problem. It is a linear sweep circuit, and I keep frying resistors on...
Awesome!! Nice to meet you :) ... From: Frank Sumption To: group Sent: Thursday, April 02, 2009 3:51 PM Subject: RE: [EVP-ITC] Hi All There's two Franks, I'm...
I placed the sweeper diagram I found in a photo folder marked Andy's stuff here on the group. I also included a diagram of how I have the initial voltage...
What circuit is it? You might try 1K, or 10K resistors. It's weasy to pu tin wrong values on schematics, I do it all the time. My circuit is right off the data...
I was just wondering is there any one in here. Close to or in the Victoria area? I am very interested in this field but everything seems to be a lil over my...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
