#1571

From: CE Web <ce_web@...>
Date: Wed Aug 5, 2009 9:28 am
Subject: Latest files to Download - 050809

Visit http://civilengineers.xplored.info or http://pdf.xplored.info to download new and previously posted ebooks ...
To download freeware files visit http://xplored.info

Polyethylene Encasement

By pdf

Effective, Economical Protection for Ductile Iron Pipe in Corrosive Environments: This brochure briefly presents the history and development of polyethylene encasement, explains how it protects Ductile Iron pipe and highlights field investigations across North America. It also discusses polyethylene’s advantages over other corrosion control methods, explains how to determine if protection is warranted, outlines proper… »

Hydraulic Analysis of Ductile Iron Pipe

By pdf

In normally specified pipe sizes, cement-mortar lined Ductile Iron pipe has an internal diameter that is larger than the nominal pipe size. For most substitute pipe materials, the inside diameter is equal to or less than the nominal diameter. When this difference is taken into… »

Cement-Mortar Linings for Ductile Iron Pipe

By pdf

This publication discusses the historical development of cement-mortar linings. Methods of application as well as properties of cement-mortar linings are also discussed. The hydraulic advantages of Ductile Iron pipe with cement-mortar linings are discussed and tables are provided which detail the results of 64 flow… »

Bridge Crossings with Ductile Iron Pipe

By pdf

This brochure offers information to assist those involved with the design and/or installation of pipelines spanning waterways, highways, and railroads. Typical design criteria which should be considered for these bridge… »

Horizontal Directional Drilling with Ductile Iron Pipe

By pdf

Horizontal Directional Drilling (HDD) is one of the fastest growing trenchless construction methods in use today. It can… »

ANSI Flanges B16.5

By pdf

ANSI B16.5, Class 150
ANSI B16.5, Class 300
ANSI B16.5, Class 400
ANSI B16.5, Class 600
ANSI B16.5, Class 900
ANSI B16.5, Class 1500
ANSI B16.5, Class… »

Reply | Messages in this Topic (1)

#1572

From: "The HR Consulting Indonesia" <skill_indonesia@...>
Date: Thu Aug 6, 2009 1:58 am
Subject: [Urgently Required] QC ENGINEER, PROJECT SCHEDULER & WASTE DUMP DESIGNER

skill_indonesia

Send Email

PT. MBP Skill Indonesia
CONTRACTING � CONSULTING � RECRUITING � TRAINING-FORMALITIES

Our client,is a Gold Mining Company located in Papua,urgently looking for :

QUALITY CONTROL ENGINEERING (Code : 211-60-02)

Requirements :

1.Bachelor Degree (S1) in Mechanical/Piping, Electrical/Instrument,
Civil/Structure,  Architecture
2.Min 10 years experience in Engineering company or Engineering Group as Senior
Engineer
3.Experience as a Draw Checker or Calculation for all discipline
(Mechanical/Piping,
Civil/Structure, Architecture, Electrical/Instrument)
4.Good in interpersonal skill, strong analytical and calculation, detail
5.Proficient in written & spoken English and computer literate
6.Willing to be located in jobsite at Tembagapura � Papua
7.Contract based for 6 months (contract will be reviewed per 6 months based on
the
performance and needs)

Job Functions are:

1.Working as a checker pictures & calculation for all discipline Mechanical /
Piping, Civil / Structure, Architect, Electrical, Instrument)
2.QC engineer Engineering All the pictures will be in the calculation or check
their accuracy before the pictures page in the IFA (Issued for Approval) or IFC
(Issued for Construction).

                CIVIL STRUCTURE (Code : 211-79-02)

Requirements:

1.Bachelor degree (S1) in Civil Engineer
2.Min 8 years in the areas of heavy industry, familiar with the steel structure
(design, fabrication drawings check), the foundation of experience in building
design industry
3.Able to use Ms.Office, The StaadPro and Auto Cad
4.Good English in both oral and writing
5.Willing to be located and working in jobsite at Tembagapura, Papua.

  WASTE DUMP DESIGNER (211-61-02)

Requirements:

1.Min S1 Civil Engineer majoring in Geotechnology or Hydrology
2.Min 5 - 10 years experience in relevant work
3.Have skill in design of soil and rock excavations, soil and rock waste dumps
and surface water drainage systems for waste dumps
4.Capable with Autocad or Civil Autocad
5.Knowledge and ability in English both oral and written
6.Willing to be located in jobsite at Tembagapura � Papua

PROJECT SCHEDULER (211-68-02)

Requirements:

1.Male/Female, Max 35 years old
2.Bachelor degree (S1) in Engineering
3.Has at least 3 - 5  years experiences record in Construction  Project or
Industry
4.Familiar with Primavera Enterprise (Planning & Controlling (PMS 101)
5.Technical, detail oriented problem solver
6.Good English in both oral and writing
7.Willing to be located and working in jobsite at Tembagapura, Papua.


Your application will be treated confidentially and only short listed candidates
will be followed up. Please send your applications with Update CV, Recent Photo
and Last Salary to resumes@... and quote the positions code.

PT. MBP Skill Indonesia
www.mbp-skill.com
www.mbp-skill.com/htm/jobs.php

Reply | Messages in this Topic (1)

#1573

From: CE Web <ce_web@...>
Date: Fri Aug 7, 2009 10:48 am
Subject: Latest files to Download - 070809

ce_web

Send Email

Please support us by sharing this post to other...

More than hundreds of new ebooks to download...

Visit http://civilengineers.xplored.info to download new and previously posted ebooks ...

To download freeware files visit http://xplored.info
Free Hydrologic Engineering Softwares

Visit http://pdf.xplored.info to download new and previously posted ebooks ...

Road network guidelines

By pdf

UMS Road network guidelines - Index of standard drawings (PDF - 66kb)
UMS 901: general design criteria (PDF - 241kb)
UMS 902: coloured pavement - threshold treatment (PDF - 225kb)
UMS 911: local traffic area roundabout - central island with concrete apron (PDF - 335kb)
UMS 912: local traffic area roundabout - fully mountable A.C. plateau (PDF - 291kb)
UMS… »

Traffic Standard Drawings
By pdf

Index – General (UMS 800 Series) (Sheet 1) (PDF - 89kb)
Index – General (UMS 800 Series) (Sheet 2) (PDF - 56kb)
UMS 811 Typical manoeuvring areas – residential streets (sheet 1 of 2) (PDF - 161kb)
UMS 812 Typical manoeuvring areas – residential streets (sheet 2 of 2) (PDF… »

Parks Standard Drawings
By pdf

Index - sheet 1 - parks (PDF - 65kb)
Index - sheet 2 - parks (PDF - 31kb)
UMS 711: park infrastructure suppliers (PDF - 224kb)
UMS 712: wheelie bin enclosure (PDF - 103kb)
UMS 713: rubbish/dog refuse bin in pavement or turf/garden bed (PDF - 198kb)
UMS 714: water tap and bubbler… »

Traffic Signals Standard Drawings

By pdf

Index - traffic signals (sheet 1) (PDF - 79kb)
Index - traffic signals (sheet 2) (PDF - 15kb)
UMS 610: electrical cable clearances - particularly to mast arms (PDF - 159kb)
UMS 611: mains connection to Energex equipment overhead (PDF - 210kb)
UMS 612: traffic signal post & pole installation (PDF - 219kb)
UMS 613: traffic signal footing details (PDF… »

Landscape Standard Drawings

By pdf

Index - landscape (PDF - 31kb)
UMS 511: tree planting within turf areas to footpath (PDF - 678kb)
UMS 512: tree planting in pavement areas to footpath (PDF - 648kb)
UMS 513: tree with companion planting bed to footpath (PDF - 970kb)
UMS 514: tree planting within turf areas to… »

Drainage Standard Drawings

By pdf

Index A - drainage (PDF - 78kb)
Index B - drainage (PDF - 40kb)
UMS 301: minimum pipe cover for construction loads - steel
reinforced concrete pipes (PDF - 237kb)
UMS 302: minimum pipe cover for construction loads - fibre
reinforced concrete pipes (PDF - 276kb)
UMS 303: construction loading typical… »

Roads Standard Drawings

By pdf

Index of standard drawings - roads (sheet 1) (PDF - 74kb)
Index of standard drawings - roads (sheet 2) (PDF - 19kb)
UMS 211: kerb and channel profiles (PDF - 290kb)
UMS 212: precast kerb… »

General Drawings

By pdf

Index of standard drawings - general (PDF - 50kb)
UMS 111: line styles and lettering (PDF - 222kb)
UMS 112: drawing symbols (PDF - 179kb)
UMS 113: Brisbane City Council corporate colours (&… »

Structural

By pdf

Index - structural (PDF - 39kb)
UMS 411: retaining walls - stonepitched (PDF - 272kb)
UMS 412: retaining wall - concrete block - type 1 footing (PDF - 232kb)
UMS 413: retaining wall… »

Reply | Messages in this Topic (1)

#1574

From: CE Web <ce_web@...>
Date: Sun Aug 9, 2009 8:08 am
Subject: AutoCAD users, designers and drafters

ce_web

Send Email

Hi All,

We are sharing all informations we have and provided some references.
We are inviting you all to join or visit http://autocad.xplored.info to see what you can get.

If you think that this email is not for you please pass it to whoever can benefit this information.

Thank you.

Reply | Messages in this Topic (1)

#1575

From: "parkcatghermez" <parkcatghermez@...>
Date: Sat Aug 8, 2009 4:50 am
Subject: modelling braced excavation in FLAC3D

parkcatghermez

Send Email

Dear friends,

I want to model one slice of a braced excavation with FLAC3D in the following
manner:

1- piles in perimeter of the excavation are modeled.

2-Soil is excavated to a certain depth and the wall is covered with shotcrete.

3-First strut is installed.

Steps 2 & 3 are repeted until specified depth.

The problem is that when I model pile with structure element pile, the forces of
struts are too excessive unrealistically.

when I eliminate the pile, forces of struts are logical.

I don't know how model the pile.
your sincerely,

Azar Amirrajab

Reply | Messages in this Topic (3)

#1576

From: roham golrokh <roham.golrokh@...>
Date: Mon Aug 10, 2009 6:10 am
Subject: Re: [Geoengineer Group] modelling braced excavation in FLAC3D

roham_roham

Send Email

Dear Colleague

Hello!

You have an interesting project. I�have done souch case by 2D Plaxis but I talked�with my freind who is experienced�in 3DFlac. He Said me there is some point to defining the project.�Send�us your Text file of project in 2.1 version. We will help you as we can.

�

Sincerely Yours��

�

On 8/8/09, parkcatghermez <parkcatghermez@...> wrote:

�

Dear friends,

I want to model one slice of a braced excavation with FLAC3D in the following manner:

1- piles in perimeter of the excavation are modeled.

2-Soil is excavated to a certain depth and the wall is covered with shotcrete.

3-First strut is installed.

Steps 2 & 3 are repeted until specified depth.

The problem is that when I model pile with structure element pile, the forces of struts are too excessive unrealistically.

when I eliminate the pile, forces of struts are logical.

I don't know how model the pile.
your sincerely,

Azar Amirrajab

--
Roham Golrokh
MSc. Geotechnical Engineer

Reply | Messages in this Topic (3)

#1577

From: "cal5690" <bcalamita@...>
Date: Mon Aug 10, 2009 11:16 am
Subject: Geotechnical Opportunities

cal5690

Send Email

Execu-Tech is looking for solid Geotechnical Engineers looking to join a Firm in
the Atlanta GA area.  Client is well established with lots of work and in need
of solid performers.

Candidates must have a PE or EIT, Solid Geotechnical background along with
understanding of the local market.

US Citizens or right to work in the US only.   Company will not pay to relocate
candidates.

Execu-Tech
Bob Calamita
904-448-9222
bcalamita@...

Reply | Messages in this Topic (23)

#1578

From: CE Web <ce_web@...>
Date: Fri Aug 14, 2009 10:20 am
Subject: Latest Files to Download - 140809

ce_web

Send Email

Check New 100+ files to download!
Downloads & Updates!

http://civilengineers.xplored.info/
Members are now allowed to submit news, reviews, downloads, image, and topsite.
You can now also create blog or promote your website in topsite list.

http://pdf.xplored.info/

Technical Papers (1)

TP-1, Use of Interrelated Records to Simulate Streamflow
TP-2, Optimization Techniques for Hydrologic Engineering
TP-3, Methods of Determination of Safe Yield and Compensation Water from Storage Reservoirs
TP-4, Functional Evaluation of a Water Resources System
TP-5, Streamflow Synthesis for Ungaged Rivers
TP-6, Simulation of… »

Seminar Proceedings

SP-1, Reservoir System Analysis
SP-2, Sediment Transport in Rivers and Reservoirs
SP-3, Urban Hydrology
SP-4, Computer Applications in Hydrology
SP-5, Hydrologic Aspects of Project Planning
SP-6, Analytical Methods in Planning
SP-7,… »

Research Documents

RD-1, A Cumulus Convection Model Applied to Thunderstorm Rainfall in Arid Regions; Dec 1970
RD-2, An Investigation of the Determinants of Reservoir Recreation Use and Demand: The Effect of Water Surface Elevation; Nov 1972
RD-4, An Assessment… »

Project Reports

PR-1, Phase 1 Oconee Basin Pilot Study Trail Creek Test
PR-2, Chattahoochee River Water Quality Analysis
PR-3, Feasibility Studies for Small Scale Hydropower Additions
… »

International Hydrologic Decade (IHD) Volumes

The IHD volumes contain references (appendices) to computer programs that may be obsolete and no longer supported by the Hydrologic Engineering Center.
The best way to download… »

The Design Decision Model™ for Corrosion Control of Ductile Iron Pipe

To better serve the water and wastewater industries, the Ductile Iron Pipe Research Association (’DIPRA’) and Corrpro Companies, Inc. have jointly developed a practical, cost effective corrosion control solution, the… »

http://xplored.info/

Computer Program Documents

Reply | Messages in this Topic (1)

#1579

From: technology job <technology1978@...>
Date: Fri Aug 14, 2009 11:10 am
Subject: Immediate Hiring Senior Engineers For Saudi Arabia. (14, Aug, 2009)

technology1978

Send Email

Ref: Immediate Hiring Senior Engineers For Saudi Arabia. (14, Aug, 2009)

Location: Jubail, Saudi Arabia.

Please send your CV to: arb4cv@....

Must send your Experience Certificate along with CV.

Applied position should be mention as a subject.

Any nationality can apply.

Dear Candidate,

Reference to above mentioned subject, please find attached herewith our required candidates Job Description for your review and action.

Job Vacancy:

Piping Designer.
Drafting Supervisor.
Purchasing Contract Specialist.
Trainers (Information Technology, Electrical, HVAC, Mechanical, Welding & Insutrumentation.
Lecturers (Chemical, Physics, Mathematics & Computer Science.

MENTION THE SALARY DETAILS AND AVAILABILITY WHILE FORWARD THE CV. PREFERENCE TO THE MIDDILE EAST EXPERIENCED APPLICANTS.

Your early action in this regard would be highly appreciated

Thanks & regards

Recruitment Team

4 of 4 File(s)

Reply | Messages in this Topic (1)

#1580

From: sam <samchanhku@...>
Date: Sun Aug 16, 2009 11:10 am
Subject: Re: [Geoengineer Group] modelling braced excavation in FLAC3D

samchanhku

Send Email

Try to use beam element to model the wall. There are too many parameters in FLAC 3D pile element . Beam element is appropriate to obtain the bending moment and shear force of the wall.

--- 2009年8月10日星期一，roham golrokh <roham.golrokh@...> 寫道﹕

寄件人: roham golrokh <roham.golrokh@...>
主題: Re: [Geoengineer Group] modelling braced excavation in FLAC3D
收件人: Geoengineer@yahoogroups.com
日期: 2009年8月10日,星期一,下午2:10

Dear Colleague

Hello!

You have an interesting project. I have done souch case by 2D Plaxis but I talked with my freind who is experienced in 3DFlac. He Said me there is some point to defining the project. Send us your Text file of project in 2.1 version. We will help you as we can.

Sincerely Yours

On 8/8/09, parkcatghermez <parkcatghermez@ yahoo.com> wrote:

Dear friends,

I want to model one slice of a braced excavation with FLAC3D in the following manner:

1- piles in perimeter of the excavation are modeled.

2-Soil is excavated to a certain depth and the wall is covered with shotcrete.

3-First strut is installed.

Steps 2 & 3 are repeted until specified depth.

The problem is that when I model pile with structure element pile, the forces of struts are too excessive unrealistically.

when I eliminate the pile, forces of struts are logical.

I don't know how model the pile.
your sincerely,

Azar Amirrajab

--
Roham Golrokh
MSc. Geotechnical Engineer

Yahoo!香港提供網上安全攻略，教你如何防範黑客!了解更多

Reply | Messages in this Topic (3)

#1581

From: CE Web <ce_web@...>
Date: Tue Aug 18, 2009 10:50 am
Subject: Latest Files to Download - 180809

ce_web

Send Email

Check New 100+ files to download!
Downloads & Updates!

http://civilengineers.xplored.info/

Downloads, Gallery, and Forum.
You can now also create blog or promote your website in topsite list.

http://autocad.xplored.info/
Download new blocks, Lisp, VBA, References

http://pdf.xplored.info/

Training Documents (2)

By pdf

TD-22, A Tutorial on Creating a Grid Cell Land Cover Data File from Remote Sensing Data
TD-23, Flood-Damage-Mitigation Plan Selection with Branch-and-Bound Enumeration
TD-24, Water Quality Modeling of Reservoir System Operations Using HEC-5
TD-25, Stochastic Analysis of Drought Phenomena
TD-26, Computing Water Surface Profiles with… »

Training Documents (1)

By pdf

TD-2, Guide Manual for the Creation of Grid Cell Data Banks
TD-3, Reservoir Storage-Yield Procedures
TD-4, Statistical Methods in Hydrology
TD-5, Floodway Determination Using Computer Program HEC-2
TD-6, Application of the HEC-2 Bridge Routines
TD-7, Analysis of Structural… »

Technical Papers (2)

By pdf

TP-21, An Approach to Reservoir Temperature Analysis
TP-22, A Finite Difference Method for Analyzing Liquid Flow in Variably Saturated Porous Media
TP-23, Uses of Simulation in River Basin Planning
TP-24, Hydroelectric Power Analysis in Reservoir Systems
TP-25,… »

Technical Papers (1)

By pdf

TP-1, Use of Interrelated Records to Simulate Streamflow
TP-2, Optimization Techniques for Hydrologic Engineering
TP-3, Methods of Determination of Safe Yield and Compensation… »

Seminar Proceedings

By pdf

SP-1, Reservoir System Analysis
SP-2, Sediment Transport in Rivers and Reservoirs
SP-3, Urban Hydrology
SP-4, Computer Applications in Hydrology
SP-5,… »

Research Documents

By pdf

RD-1, A Cumulus Convection Model Applied to Thunderstorm Rainfall in Arid Regions; Dec 1970
RD-2, An Investigation of the Determinants of Reservoir Recreation Use… »

http://xplored.info/

Computer Program Documents
Hydrologic Engineering Softwares

Reply | Messages in this Topic (1)

#1582

From: "zekkos_gr" <zekkos@...>
Date: Wed Aug 26, 2009 9:40 am
Subject: Geoengineer.org Newsletter Issue#56

zekkos_gr

Send Email

Geoengineer.org Newsletter Issue#56

Dear colleagues,

the latest issue (#56) of the Geoengineer Newsletter has been published and is
available for free at:
http://www.geoengineer.org/geonews56.htm

The newsletter includes many resources in geoengineering available by the
Geoengineer Website. To receive the newsletter for free in your mailbox you will
need to subscribe.

Sincerely,

Dimitris

***********************
Dimitrios Zekkos, Ph.D., P.E.
Assistant Professor
Department of Civil and Environmental Engineering
University of Michigan, Ann Arbor, USA
http://www.umich.edu/~geotech/

Geoengineer.org
A Center for Information Dissemination on Geoengineering
http://www.geoengineer.org

International Journal of Geoengineering Case Histories
Official Journal of the International Society for Soil Mechanics and
Geotechnical Engineering
http://casehistories.geoengineer.org

Reply | Messages in this Topic (1)

#1583

From: CE Web <ce_web@...>
Date: Mon Sep 7, 2009 10:17 am
Subject: Latest Files to Download - 070909

ce_web

Send Email

Support us by sharing this information...

Downloads & Updates!

http://civilengineers.xplored.info/

Coordinates System converter

Convertion

Calculators and Converters

http://autocad.xplored.info/
VBA
VBA files

LISP
Lisp File

Blocks
AutoCAD Blocks

References
Any AutoCAD related files...

http://pdf.xplored.info/

Latest Post to Downloads...

Installation Guide for Ductile Iron Pipe

This handbook is full of useful information for designers and installers of Ductile Iron pipe. It covers many aspects of pipeline installation such as receiving and handling, trenching, installing, backfilling, testing and disinfecting, and service taps. It also contains a variety of useful miscellaneous information such as a listing of Ductile Iron pipe standards, common… »

Field Welding and Cutting Ductile Iron Pipe

Ductile Iron pipe manufacturers have been successfully welding Ductile Iron pipe for many years and should be consulted on their recommendations for field welding and torch cutting their product. This manual is intended as a guide for field welding and cutting cement-mortar-lined and unlined Ductile… »

Polyethylene Encasement Installation Guide

Polyethylene encasement has proved to be an effective and economical method of corrosion protection for Ductile Iron pipe. As with all corrosion protection systems, proper installation is vital to its success. By implementing the methods outlined in this brochure, a proper installation can be achieved… »

MATERIAL COMPARISONS

Source : DIPRA
Other pipe materials are sometimes considered as substitutes for Ductile Iron pipe, but when Ductile’s many advantages are considered, those substitutes just don’t quite compare. Follow the links… »

Training Documents (2)

TD-22, A Tutorial on Creating a Grid Cell Land Cover Data File from Remote Sensing Data
TD-23, Flood-Damage-Mitigation Plan Selection with Branch-and-Bound Enumeration
TD-24,… »

Training Documents (1)

TD-2, Guide Manual for the Creation of Grid Cell Data Banks
TD-3, Reservoir Storage-Yield Procedures
TD-4, Statistical Methods in Hydrology
TD-5, Floodway Determination Using Computer… »

http://xplored.info/

Ductile Iron Computer Programs

Design of Ductile Iron Pipe on Supports

Hydraulic Analysis of Ductile Iron Pipe

Thickness Design of Ductile Iron Pipe

Thrust Restraint Design for Ductile Iron Pipe

Reply | Messages in this Topic (1)

#1584

From: "zekkos_gr" <zekkos@...>
Date: Mon Sep 7, 2009 11:33 am
Subject: Invitation to Develop a Geoengineering Blog & win prizes

zekkos_gr

Send Email

Dear colleagues,

We are pleased to invite you to participate in the "Geoengineering Blog of the
year 2009-2010 Contest". Every year the most active and useful blogs within the
Geoengineering Blog Community will receive prizes, which may include free books
or conference registrations.

To read the announcement please visit: http://www.geoengineer.org/geoBlog.htm

Sincerely,

Dimitris

***********************
Dimitrios Zekkos, Ph.D., P.E.
Assistant Professor
Department of Civil and Environmental Engineering
University of Michigan, Ann Arbor, USA
http://www.umich.edu/~geotech/

Geoengineer.org
A Center for Information Dissemination on Geoengineering
http://www.geoengineer.org

International Journal of Geoengineering Case Histories
Official Journal of the International Society for Soil Mechanics and
Geotechnical Engineering
http://casehistories.geoengineer.org

Reply | Messages in this Topic (1)

#1585

From: CE Web <ce_web@...>
Date: Mon Sep 14, 2009 9:55 am
Subject: Latest Files to Download - 140909

ce_web

Send Email

Coordinates System converter

Convertion

Calculators and Converters

http://autocad.xplored.info/
VBA
VBA files

LISP
Lisp File

Blocks
AutoCAD Blocks

References
Any AutoCAD related files...

http://pdf.xplored.info/

Latest Post to Downloads...

Installation Guide for Ductile Iron Pipe

Field Welding and Cutting Ductile Iron Pipe

Polyethylene Encasement Installation Guide

MATERIAL COMPARISONS

Training Documents (2)

TD-22, A Tutorial on Creating a Grid Cell Land Cover Data File from Remote Sensing Data
TD-23, Flood-Damage-Mitigation Plan Selection with Branch-and-Bound Enumeration
TD-24,… »

Training Documents (1)

TD-2, Guide Manual for the Creation of Grid Cell Data Banks
TD-3, Reservoir Storage-Yield Procedures
TD-4, Statistical Methods in Hydrology
TD-5, Floodway Determination Using Computer… »

http://xplored.info/

Ductile Iron Computer Programs

Design of Ductile Iron Pipe on Supports

Hydraulic Analysis of Ductile Iron Pipe

Thickness Design of Ductile Iron Pipe

Thrust Restraint Design for Ductile Iron Pipe

Downloads & Updates!

http://civilengineers.xplored.info/

Project Manager Contract

Architecture And Planning Guide

Preparation of Standards Referenced by Water Utilities

Road Reserve

Thrust restraint of buried pipelines

Reply | Messages in this Topic (1)

#1586

From: "Execu-Tech" <bcalamita@...>
Date: Wed Sep 16, 2009 11:30 am
Subject: Director of Geotechnical Engineering

cal5690

Send Email

We are looking for a Director of Geotechnical Engineering for a large Design and Build Firm.

This is a very Senior Level opportunity in the Plano TX area that requires a PE, 10+ yrs experience soild Geotechnical experience, Management and more.

This is a very hot opportunity that requires someone with the right to work in the USA.

Bob Calamita
Execu-Search/Tech
904-262-9974
bcalamita@...
bcalamita@...

Reply | Messages in this Topic (1)

#1587

From: CE Web <ce_web@...>
Date: Fri Sep 18, 2009 12:04 am
Subject: Latest Files to Download - 180909

ce_web

Send Email

Downloads & Updates!

http://civilengineers.xplored.info/

BRIDGE STRUCTURE RATING
Strut and Tie Modelling
Tunnelling and Pipejacking
Pipe Jacking
Project Manager Contract

Architecture And Planning Guide

Preparation of Standards Referenced by Water Utilities

Road Reserve

Thrust restraint of buried pipelines

Coordinates System converter

Convertion

Calculators and Converters

http://autocad.xplored.info/

VBA
Setout Table
TableFromExcel
Convert Polyline
Miter Bend
Plot Points

LISP
3D Polyline to 2D
Dimension Flip
Batter
Add number

Blocks

References
Details Residential Architecture
AutoCAD 2010 Preview Part1
AutoCAD 2010 Preview Part2
AutoCAD 2010 Preview Part3
AutoCAD 2010 Preview Part4

http://pdf.xplored.info/

Specifications for Electrical Installations

Specifications for Electrical Installations
All drawing files below are Adobe PDF format between 166kb – 321kb … »

Specification for Constructions of Concrete Reserviors

Specification for Constructions of Concrete Reserviors
All drawing files below are Adobe PDF format between 100kb – 225kb … »

Specification for Construction of Major Water Supply Mains

Specification for Construction of Major Water Supply Mains
All drawing files below are Adobe PDF format between 120kb – 240kb … »

http://xplored.info/

Ductile Iron Computer Programs

Design of Ductile Iron Pipe on Supports

Hydraulic Analysis of Ductile Iron Pipe

Thickness Design of Ductile Iron Pipe

Thrust Restraint Design for Ductile Iron Pipe

Reply | Messages in this Topic (1)

#1588

From: technology job <technology1978@...>
Date: Fri Sep 18, 2009 6:53 pm
Subject: Job Vacancy for Atchitectural, Planner Project and Site Engineer's in Dammam, Saudi Arabia

technology1978

Send Email

Dear Applicant,

Reference to above mentioned subject, we are hiring Architectural, Planner, Project and Site Engineer's immediately.

Please find attached herewith Engineer's Job Description for your review and action.

Candidate must be Saudi Arabian Transferable VISA (IQAMA) holder.

CV's sent to: arb4cv@...

Thanks & regards

Recruitment Team

Dammam, Saudi Arabia

2 of 2 File(s)

Project

Architect

Reply | Messages in this Topic (1)

#1589

From: Siamak Pourakhtarieh <pourakhtar@...>
Date: Sun Sep 20, 2009 2:27 pm
Subject: Fw: Ring Foundation-Technical query

pourakhtar

Send Email

--- On Sun, 9/20/09, afshin bagherzade <afshinba1353@...> wrote:

From: afshin bagherzade <afshinba1353@...>
Subject: Ring Foundation-Technical query
To:
Date: Sunday, September 20, 2009, 4:53 AM

Dear expert engineers,

This is a problem took place in a ring foundation of a steel tank with 70.meters Diameter to a friend of mine (as contractor of the project).How do you think?What is the reason for these cracks?
- Differential settlements?
- Poor concrete around cracked area?
- Concrete cover less than required?
-......
Consider the direction of cracks!

RegardsAfshin

---------- Forwarded message ---------
From: Mehrdad alizadeh <peg_alizadeh@...>
Date: Tue, Sep 15, 2009 at 5:23 PM
Subject: Technical query
To: afshin.bagherzadeh@...
Cc: kambozia rastan <k.rastan@...>

Dear Mr. Bagherzadeh,

Further to our msg. of yesterday, I would like to inform you that I faced a problem with our project in ahwaz so as following :

The foundation of our storage tank of 1 million barrel (under construction) has fracture in in side (as attached photoes tells before & after repair). I learnt from the information I received from site that, the coverage of concrete may involve or more. So, I wrote to you to inform you of problem and ask following question.

The foundation of Tank is shaped as Concrete Ring, so the middle of the ring has been filled with soil and compacted to degree of spec. Foundation has reinforced with rebar inside.

1- what is the reason for such crack or fraction on concrete foundation.

2- what is the ways to repair?

3- will it be extended?

4- Is it dangerous to us?

All the information which may required by your side is available here and by your question will be forwarded urgently.

Regards

M. Alizadeh

5 of 5 Photo(s)

Reply | Messages in this Topic (1)

#1590

From: CE Web <ce_web@...>
Date: Sun Sep 27, 2009 8:50 am
Subject: Latest Files to Download - 270909

ce_web

Send Email

Bridge Design Manuals - Misc

BRIDGE STRUCTURE RATING
Strut and Tie Modelling
Tunnelling and Pipejacking
Pipe Jacking
Project Manager Contract

Architecture And Planning Guide

Preparation of Standards Referenced by Water Utilities

Road Reserve

Thrust restraint of buried pipelines

Coordinates System converter

Convertion

Calculators and Converters

http://autocad.xplored.info/

VBA
Setout Table
TableFromExcel
Convert Polyline
Miter Bend
Plot Points

LISP
3D Polyline to 2D
Dimension Flip
Batter
Add number

Blocks

References
Details Residential Architecture
AutoCAD 2010 Preview Part1
AutoCAD 2010 Preview Part2
AutoCAD 2010 Preview Part3
AutoCAD 2010 Preview Part4

http://pdf.xplored.info/

Specifications for Electrical Installations

Specifications for Electrical Installations
All drawing files below are Adobe PDF format between 166kb – 321kb … »

Specification for Constructions of Concrete Reserviors

Specification for Constructions of Concrete Reserviors
All drawing files below are Adobe PDF format between 100kb – 225kb … »

Specification for Construction of Major Water Supply Mains

Specification for Construction of Major Water Supply Mains
All drawing files below are Adobe PDF format between 120kb – 240kb … »

http://xplored.info/

Ductile Iron Computer Programs

Design of Ductile Iron Pipe on Supports

Hydraulic Analysis of Ductile Iron Pipe

Thickness Design of Ductile Iron Pipe

Thrust Restraint Design for Ductile Iron Pipe

Downloads & Updates!

http://civilengineers.xplored.info/

TYPICAL DETAIL NOTES

TYPICAL GENERAL NOTES

PRELIMINARY DESIGN

NOISE BARRIERS

GENERAL INFORMATION

Reply | Messages in this Topic (1)

#1591

From: "skahmad" <skahmad@...>
Date: Sun Sep 27, 2009 8:19 am
Subject: updated conferences in civil engineering

skahmad

Send Email

For updated information about conferences in civil engineering, plz visit
http://civilengineer.webinfolist.com/conferences.htm

Reply | Messages in this Topic (1)

#1592

From: Gopal Mishra <gopal.nitc@...>
Date: Mon Sep 28, 2009 8:10 pm
Subject: Indeterminate Truss Analysis - By All Methods- E book

gopal904

Send Email

The key to resolving our predicament, when faced with a problem and the equations of static equilibrium do not suffice to determine a unique solution, lies in opening up our field of view to consider the displacements of points in the structure and the deformation of its members. This introduces new variables, a new genera of flora and fauna, into our landscape; for the truss structure the species of node displacements and the related species of uniaxial member strains must be engaged. For the frame structure made up of beam elements, we must consider the slope of the displacement and the related curvature of the beam at any point along its length.

visit http://www.theconstructor.org to download the e-book..

Regards,
The Constructor,
www.theconstructor.org

Reply | Messages in this Topic (1)

#1593

From: Gopal Mishra <gopal.nitc@...>
Date: Mon Sep 28, 2009 8:09 pm
Subject: Civil Engineering Books- Online

gopal904

Send Email

Hi.. Now read civil engineering and also download it from http://www.theconstructor.org

--
Regards,
The Constructor,
www.theconstructor.org

Reply | Messages in this Topic (1)

#1594

From: "skahmad" <skahmad@...>
Date: Tue Sep 29, 2009 11:39 am
Subject: worldwide jobs for civil engineers

skahmad

Send Email

Lots of worldwode jobs for civil engineers at
http://jobnetwire.com/eng/civil/ce.htm

Reply | Messages in this Topic (1)

#1595

From: Gopal Mishra <gopal.nitc@...>
Date: Tue Sep 29, 2009 6:49 pm
Subject: Design and Detailing For Earthquake Loads

gopal904

Send Email

The requirements for designing and detailing of steel frames is covered here so as to give them adequate strength, stability and ductility to resist severe earthquakes in all zones of IS:1893 without collapse. Frames not intended to resist earthquake loads need not satisfy the requirements of this section, provided they can accommodate the resulting deformation.

Read Complete Post at http://www.theconstructor.org/2009/09/design-and-detailing-for-earthquake.html

--
Regards,
Gopal Kumar Mishra,
The Constructor,
www.theconstructor.org
gopal@...

Reply | Messages in this Topic (1)

#1596

From: "zekkos_gr" <zekkos@...>
Date: Wed Sep 30, 2009 8:12 am
Subject: Geoengineer.org Newsletter Issue#57

zekkos_gr

Send Email

Geoengineer.org Newsletter Issue#57

Dear colleagues,

the latest issue (#57) of the Geoengineer Newsletter has been published and is
available for free at:
http://www.geoengineer.org/geonews57.htm

The newsletter includes many resources in geoengineering available by the
Geoengineer Website. To receive the newsletter for free in your mailbox you will
need to subscribe.

Sincerely,

Dimitris

***********************
Dimitrios Zekkos, Ph.D., P.E.
Assistant Professor
Department of Civil and Environmental Engineering
University of Michigan, Ann Arbor, USA
http://www.umich.edu/~geotech/

Geoengineer.org
A Center for Information Dissemination on Geoengineering
http://www.geoengineer.org

International Journal of Geoengineering Case Histories
Official Journal of the International Society for Soil Mechanics and
Geotechnical Engineering
http://casehistories.geoengineer.org

Reply | Messages in this Topic (1)

#1597

From: "W" <dcoen33@...>
Date: Wed Sep 30, 2009 9:23 pm
Subject: Boring log software

dcoen33

Send Email

Does anyone out there have a link for gint or geosystem software?

Reply | Messages in this Topic (7)

#1598

From: Luis Garcia <l_garcia22@...>
Date: Wed Sep 30, 2009 9:49 pm
Subject: Re: [Geoengineer Group] Boring log software

l_garcia22

Send Email

i have been looking for GINT everywhere and for years and it is not available. On top of that you need have a key to use it.

if you find it, let me know.

Luis Garcia

--- On Wed, 9/30/09, W <dcoen33@...> wrote:

From: W <dcoen33@...>
Subject: [Geoengineer Group] Boring log software
To: Geoengineer@yahoogroups.com
Date: Wednesday, September 30, 2009, 2:23 PM

Does anyone out there have a link for gint or geosystem software?

Reply | Messages in this Topic (7)

#1599

From: CE Web <ce_web@...>
Date: Thu Oct 1, 2009 9:23 am
Subject: Latest Files to Download - 011009

ce_web

Send Email

Downloads & Updates!

http://civilengineers.xplored.info/

Convertion Software !!!

TYPICAL DETAIL NOTES

TYPICAL GENERAL NOTES

PRELIMINARY DESIGN

NOISE BARRIERS

GENERAL INFORMATION

Bridge Design Manuals - Misc

BRIDGE STRUCTURE RATING
Strut and Tie Modelling
Tunnelling and Pipejacking
Pipe Jacking
Project Manager Contract

Architecture And Planning Guide

Preparation of Standards Referenced by Water Utilities

Road Reserve

Thrust restraint of buried pipelines

Coordinates System converter

Convertion

Calculators and Converters

http://autocad.xplored.info/

VBA
Setout Table
TableFromExcel
Convert Polyline
Miter Bend
Plot Points

LISP

Area Calc !!!
3D Polyline to 2D
Dimension Flip
Batter
Add number

Blocks

References
Details Residential Architecture
AutoCAD 2010 Preview Part1
AutoCAD 2010 Preview Part2
AutoCAD 2010 Preview Part3
AutoCAD 2010 Preview Part4

http://pdf.xplored.info/

Specifications for Electrical Installations

Specifications for Electrical Installations
All drawing files below are Adobe PDF format between 166kb – 321kb … »

Specification for Constructions of Concrete Reserviors

Specification for Constructions of Concrete Reserviors
All drawing files below are Adobe PDF format between 100kb – 225kb … »

Specification for Construction of Major Water Supply Mains

Specification for Construction of Major Water Supply Mains
All drawing files below are Adobe PDF format between 120kb – 240kb … »

http://xplored.info/

Ductile Iron Computer Programs

Design of Ductile Iron Pipe on Supports

Hydraulic Analysis of Ductile Iron Pipe

Thickness Design of Ductile Iron Pipe

Thrust Restraint Design for Ductile Iron Pipe

Reply | Messages in this Topic (1)

#1600

From: Gopal Mishra <gopal.nitc@...>
Date: Fri Oct 2, 2009 4:43 am
Subject: RCC Walls- Design Tips

gopal904

Send Email

RCC Walls- Design Tips

1. The minimum reinforcement for the RCC wall subject to BM shall be as follows:
A. Vertical reinforcement:
a) 0.0012 of cross sectional area for deformed bars not larger than 16mm in diameter and with characteristic strength 415 N/mm^2 or greater.b) 0.0015 of cross sectional area for other types of bars.
http://www.theconstructor.org/2009/03/rcc-walls.html

--
Regards,
Gopal Kumar Mishra,
The Constructor,
www.theconstructor.org
gopal@...
Finite Element Methods - An Introduction

Reply | Messages in this Topic (1)

Breaking News Visit Yahoo! News for the latest.

The Yahoo! Groups Product Blog

Group Information

Yahoo! Groups Tips

Did you know...

Messages

Traffic Standard DrawingsBy pdf

Parks Standard DrawingsBy pdf

Latest Post to Downloads...

Ductile Iron Computer Programs Design of Ductile Iron Pipe on Supports Hydraulic Analysis of Ductile Iron Pipe Thickness Design of Ductile Iron Pipe Thrust Restraint Design for Ductile Iron Pipe

Latest Post to Downloads...

Ductile Iron Computer Programs Design of Ductile Iron Pipe on Supports Hydraulic Analysis of Ductile Iron Pipe Thickness Design of Ductile Iron Pipe Thrust Restraint Design for Ductile Iron Pipe

Ductile Iron Computer Programs Design of Ductile Iron Pipe on Supports Hydraulic Analysis of Ductile Iron Pipe Thickness Design of Ductile Iron Pipe Thrust Restraint Design for Ductile Iron Pipe

Ductile Iron Computer Programs Design of Ductile Iron Pipe on Supports Hydraulic Analysis of Ductile Iron Pipe Thickness Design of Ductile Iron Pipe Thrust Restraint Design for Ductile Iron Pipe

Ductile Iron Computer Programs Design of Ductile Iron Pipe on Supports Hydraulic Analysis of Ductile Iron Pipe Thickness Design of Ductile Iron Pipe Thrust Restraint Design for Ductile Iron Pipe

Traffic Standard Drawings
By pdf

Parks Standard Drawings
By pdf

Ductile Iron Computer Programs

Design of Ductile Iron Pipe on Supports

Hydraulic Analysis of Ductile Iron Pipe

Thickness Design of Ductile Iron Pipe

Thrust Restraint Design for Ductile Iron Pipe

Ductile Iron Computer Programs

Design of Ductile Iron Pipe on Supports

Hydraulic Analysis of Ductile Iron Pipe

Thickness Design of Ductile Iron Pipe

Thrust Restraint Design for Ductile Iron Pipe

Ductile Iron Computer Programs

Design of Ductile Iron Pipe on Supports

Hydraulic Analysis of Ductile Iron Pipe

Thickness Design of Ductile Iron Pipe

Thrust Restraint Design for Ductile Iron Pipe

Ductile Iron Computer Programs

Design of Ductile Iron Pipe on Supports

Hydraulic Analysis of Ductile Iron Pipe

Thickness Design of Ductile Iron Pipe

Thrust Restraint Design for Ductile Iron Pipe

Ductile Iron Computer Programs

Design of Ductile Iron Pipe on Supports

Hydraulic Analysis of Ductile Iron Pipe

Thickness Design of Ductile Iron Pipe

Thrust Restraint Design for Ductile Iron Pipe