Bugger ... bad memory .... I guess magenta is the preferred color to use ... Still can't find where I saw someone make a test print/etch with various...
1431
MIKE DURKIN
seth_otherpower
Oct 18, 2011 2:15 am
Memory is fading ... im re anting and going with magenta as being the best. Still looking where I had seen a test print/etch with deferent colors/ inks. ... ...
1432
alienrelics
Oct 18, 2011 3:21 am
It depends. If I recall correctly, some said it was yellow for Durabrite and MISPRO inks. But others tested magenta as the best. I just found a test someone...
1433
Donald H Locker
dhlocker
Oct 18, 2011 11:47 am
<http://groups.yahoo.com/group/Homebrew_PCBs/photos/album/451964963/pic/list> should put you in the right album. The last photo is most telling. Donald. -- ...
1434
MIKE DURKIN
seth_otherpower
Oct 19, 2011 4:19 am
Yes... the last one is informative. To: Inkjet_PCB_Construction@yahoogroups.com From: dhlocker@... Date: Tue, 18 Oct 2011 11:47:19 +0000 Subject: Re:...
1435
stevedeyoreo
Oct 22, 2011 5:40 am
I've been using MISPRO Yellow MISPRO-4-Y (http://www.inksupply.com/arcink_mispro.cfm) with very good results. I use an Epson 725....
1436
stevedeyoreo
Oct 23, 2011 12:05 am
I'm using an Epson 725 and use Eagle to layout the artwork. But it won't print over where it thinks the hole is. Does anybody have a way to make the Epson...
1437
bebx2000
Oct 23, 2011 6:20 pm
This works for the Epson Artisan 50, http://tech.groups.yahoo.com/group/Inkjet_PCB_Construction/message/924 Baxter...
1438
fastlink30
Oct 24, 2011 3:59 pm
someone have experinece with epson stylus dx7450? i can buy 1 of this, but before i want know if is simple to modify, is ink are ok,if i must know something...
1439
b3nzilla
Oct 29, 2011 2:01 pm
Hi all, I've tried a bunch of methods and none of them are working for me. The approach I've had the most success with so far has been modifying my.xml file as...
1440
Steve Greenfield
alienrelics
Oct 31, 2011 10:58 pm
Just got an email from MCM with this on sale: ...
1441
barry
bazzapromenade
Nov 21, 2011 3:06 pm
Came acsoss this. http://www.gizmag.com/inkodye-photo-fabric-dye/20541/?utm_source=Gizmag+Subscribers&utm_campaign=73a28b1ead-UA-2235360-4&utm_medium=email may...
1442
MIKE DURKIN
seth_otherpower
Nov 21, 2011 3:34 pm
wonder what level of detail can be reached .. and hope it can withstand etchant .... To: Inkjet_PCB_Construction@yahoogroups.com From: bazza@......
1443
supahdupahhappyfuntim...
supahdupahha...
Dec 6, 2011 3:29 am
On Craigslist I have these printers to choose from: Epson C84 Epson C86 Epson Stylus NX420 Maybe a few others if I get some more replies. Any certain model I...
1444
James Newton
jamesmichael...
Dec 6, 2011 5:04 pm
Hey Ryan, I would buy one of the printers that doesn't require any modification so you can get started quickly and easily and then modify it if you need a...
1445
supahdupahhappyfuntim...
supahdupahha...
Dec 6, 2011 7:07 pm
Cheers! I did a little more searching and found an R1800 for $25. It has the CD tray, but most of my circuits need a larger area. Will report back once I've...
1446
Steve Greenfield
alienrelics
Dec 9, 2011 8:03 pm
It has been asked here before - how do you drive an inkjet print head? I found an inkjet print head shield project ("shields"; are boards that plug into...
1447
Hans
schreiner56
Jan 5, 2012 9:42 pm
Hi, I read here from a printer that can be use for pcbprinting without modification , but I forget the printername . Can someone help me ? Hans...
1448
Mark Lerman
mark_from_po...
Jan 5, 2012 11:32 pm
I believer it was the R2400. Mark...
1449
Steve Greenfield
alienrelics
Jan 6, 2012 12:29 am
It was any Epson that both prints on CDs, and that uses pigmented inks. However, most Epson dye ink printers can use pigmented inks. There is a gentleman...
1450
alienrelics
Jan 6, 2012 2:22 am
I have 5 or so old Epson Stylus Photo 3000 printers, they also have a straight through path for heavy paper but the resolution is a lot less. I do also have an...
1451
alienrelics
Jan 8, 2012 2:38 am
I see that lots of eBay sellers are selling replacement CD trays for the Epson R200/R300 series. The original trays had a thin leading edge that breaks off. ...
1452
mad21angus
Jan 8, 2012 4:07 pm
I've got an old Epson Stylus C84 witch never get's used which I'm going to mod. I was wondering after painting boards with Pebeo Vitrea paint as described in...
1453
alienrelics
Jan 8, 2012 4:16 pm
Some people have used their Durabrite or other pigmented inks in place of a silkscreen to do component masks. ...
1454
mad21angus
Jan 8, 2012 5:26 pm
Thanks. It will be quite a while before I get the printer modded, but I've now got enough info to start experimenting when it's done. Cheers....
1455
alienrelics
Jan 9, 2012 10:58 pm
It appears that when using the Epson printers that use Durabrite (C80 series, among others) that Magenta or a mix of Magenta and Yellow have been tested to...
1456
MIKE DURKIN
seth_otherpower
Jan 10, 2012 2:14 am
I would like the temp controlled for a toaster ovan too .... Mike KC7NOA To: Inkjet_PCB_Construction@yahoogroups.com From: alienrelics@... Date: Mon, 9...
1457
Steve Greenfield
alienrelics
Jan 10, 2012 5:01 am
I am going to do this as a Kickstarter project that will end as an open source project, I think. Steve Greenfield AE7HD ...
1458
Dave Hylands
dhylands_99
Jan 12, 2012 4:07 am
Hi Steve, ... I saw a blog recently for an Open Source PID Controller, designed for controlling temperature (and could probably be used for other things as...
1459
alienrelics
Jan 13, 2012 1:41 am
I'm very pumped! I just picked up an Epson 4800 on Craigslist. The 4800 uses UltraChrome K3, same as the 2400, which of course has been tested to work as etch...
