Hi Guys, I'm getting the following when trying to build a T5220... {0} ok boot buildnet - install Boot device: /pci@0/pci@0/pci@8/pci@0/pci@a/network@0 File...
Hi Malc, ... What do you see on the server? Can you see the requests coming in via snoop? If so, try trussing bootparamd and see if you can see why it isn't...
Hi William, netmasks ok. last few lines from snoop.... OLD-BROADCAST -> (broadcast) RARP C Who is 0:15:17:6a:9e:8e ? frcadm1pa-nim -> frclegb-new1 RARP R...
Hi again, ... I can't think of anything else at the moment- the server's obviously seeing the arp and responding, then sending a reply to the bootparams...
... Hmmm, call me suspicious but it is not the 1st I have heard about a failure to JumpStart a T52xx, ... This is the full server and not a "guest LDom ?" ... ...
Bruce D Porter
Bruce.D.Porter@...
Aug 4, 2008 1:53 pm
2174
Hi, ... Interesting point- this looks like a JumpStart failure, not a JET issue: Might be worth raising a call against it... Cheers, W....
Malcolm, the bootparams message is a red herring - looking at the output below, the client has already been through the bootparam phase once to get the...
Guys, ... 043 (in use by ... As you can also see, its also gotten pretty far. Its running netbooted Solaris, so the initial bootparams stuff worked fine. Mike...
Guys, thanks for all your responses. we managed to trace the ip address back to an IBM LPAR, so I requested another ip which I've now got, I'll be trying again...
@all I’ve just a quick question regarding Jet and Jumpstarting a M5000… I’ve the following problem: Media: Sol10-u5-08 XSCF 1071 Jet 4.4 When I was...
... From: "markus.flueckiger@..." <markus.flueckiger@...> Date: Thursday, August 7, 2008 6:51 am Subject: [JETJumpStart] Problem to Jumpstart a...
Bruce Porter
Bruce.D.Porter@...
Aug 7, 2008 9:27 am
2180
I’ve checked the inetboot version… and in the article which you mentioned, it means we should use in minimum a version upwards of s10u3…I use the s10u5...
So I'm completely stumped. I have two identical v245s on private network with a JET server. Templates are nearly identical (differences are network addrs, ...
Odd - I was going to suggest this, but having an EFI label normally results in an error about the disk not having a valid label - or at least it did to me on...
Marty, That is what made this so hard to find: it wasn't the root disk that was labeled EFI, it was the *second disk* (destined as the mirror) that had the EFI...
Unlikely JET will ever fix this issue - at the point that the install fails, it is the Solaris installer that is bombing out. It's this that needs to be ZFS...
So, I've found the instructions floating around for creating a self-contained custom Solaris DVD install using a flar rather than the factory install, and I've...
Bit more info on this: I've booted the machine in single user mode to try and see what is up. I can't seem to get the network working. When I run ifconfig, it...
Actually, JET has a base_config_label_disks variable that lets you explictly label disks for you. :-) (but you need to know yourself that you want to label it)...
I was apparently using older templates that didn't include that -- I'll add it. Is there any downside to specifying this for all disks, just to be sure? ...
... Yes, I once wrote JetDVD... then broke it and never finished it :-( Sparc and x86 differ (currently), I only did x86. I have produced flash installs for S9...
Bruce D Porter
Bruce.D.Porter@...
Aug 12, 2008 5:56 pm
2193
... It may be worth checking out the log file form /var/opt/sun/jet ... I'm just doing T5240s this week, so will be on the case if any issues ;-) -- ______ ...
Bruce D Porter
Bruce.D.Porter@...
Aug 12, 2008 5:57 pm
2194
Adding JET onto a CD/DVD install is possible - I've got a product recovery CD that is based on the solution; exactly as you suggest - do a 'boot cdrom -...
I have been doing T5240's for 2 months and have had not jumpstart/JET related issues. This includes both Host domain and Logical domain even using Flars. Not...
... I've been Jumping the CD ok so far, not Jumnped an LDom yet, probably tomorrow after I have ironed some LDom typos out of my template. ... Its not needed...
Bruce D Porter
Bruce.D.Porter@...
Aug 13, 2008 9:00 pm
2197
... From: Mark <flowage00@...> Date: Wednesday, August 13, 2008 3:05 pm Subject: [JETJumpStart] Re: T5140 To: JETJumpStart@yahoogroups.com ... ...
Bruce Porter
Bruce.D.Porter@...
Aug 14, 2008 12:23 pm
2198
Is it possible to build a Redhat server with Solaris 10 Jumpstart with JET and DHCP? Please advise. Mike...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
