"orgonecritical Yahoo group — "Wilhelm Reich's hypothesis criticisms; For the
first time in the scientific area, what the philosophs of every time, mystics of
any civilisation had intuitively presumed and christened of the different names
as prana, mana, chi, ki...etc ; what some other scientists as Franz Anton
Messmer, Burr, Reichenbach had used to experiment or use to heal their patients
without never really PROVING it ever exists (on name of "animal magnetism",
"odic energy"...etc) had been SCIENTIFICALLY demonstrated, measured by Wilhelm
Reich who has called it "orgone" (for orgasm, organism.)
                                        \
                                        \
  
                                        \
                                        \
                     
 Joel Carlinsky, le modérateur américain de ma liste, consacrée à la
découverte de l'énergie d'orgone par Wilhelm Reich en 1939-1940, vient de me
signaler gentilment que le groupe d"'orgone-critical" dont je suis le
fondateur est répertorié dans le "media-centers" d'outre Atlantique dans la
rubrique "Mailing Lists" de la table des matières.
 
http://www.lust-for-life.org/Lust-For-Life/Media_Centers/Media_Centers.htm 

Cest à la fois un grand honneur pour Joel, qui est le rédacteur principal de
ma liste, pour moi, bien sûr, et aussi le signe que le complot du silence ayant
été fomenté contre Wilhelm Reich et ses découvertes, qui perdure depuis la
mort du savant consécutive à sa détention arbitraire, est menacé d'échec
à très court terme!
Vous trouverez ci-dessous un extrait du "MEDIA-CENTERS" de la rubrique
concernée, la totalité de la table des matières se trouvant sur le lien
ci-dessus.





	 * Journalists Yahoo group — "The purpose of this forum is to facilitate
respectful and fruitful discussion between anarchists and marxists from all
shades of the ideological spectrum, for the purpose of helping all participants
develop and elucidate their ideas through the dialectic of criticism and
counter-criticism. In this way, we become more resonant agents in the (class)
struggle to effectively sabotage Capital, its (state) apparatus/apex, and its
Slaves, in all areas of our lives. Our aim is to uncover, reclaim and invoke the
original unity of anti-authoritarian and communistic ideas within the socialist
tradition, and to discuss a variety of historical and emergent forms for
channeling and invocating (bringing-into-the-world) our class Power. Our weapons
include everything from revolutionary industrial unionism to sonic warfare;
anything disrupting the mining of surplus-value by invoking our Power: the
unity, dignity and sentience of our Class."
	 * LeftLibertarian Yahoo group — "To encourage can-do libertarianism, the
formation of self-reliant individuals and AnarchoVillages, effective
self-defense for freedom-living peoples worldwide, and to keep members of the
Movement of the Libertarian Left (MLL) in touch around the globe."
	 * LeftLibertarian2 Yahoo group — "This new list is governed without
heavy-handed moderation or censorship, in the tradition of SEK3's motto:
'Everyone here disagrees!'"
	 * LeftLibertarianism Yahoo group — "A list for the thinking anarchist. For
anyone who has ever read Peter Kropotkin, Mikhail Bakunin, Emma Goldman,
Benjamin Tucker, William Godwin, Pierre Proudhon, Max Stirner, Murray Bookchin,
Noam Chomsky, Rudolf Rocker, etc. This list is for anyone who opposes hierarchy
and the state. We will discuss Libertarian Socialist theory."
	 * Mutual Aid
	 * neoist Yahoo group — "The Neoist Society – Renewing Neoism on a daily
basis ... a subsidiary of the International Post-Dogmatist Group"
	 * News_Junkie_GP Yahoo group — "News Junkie GP is for people who want to see
through the veil."
	 * Nothingness
	 * orgonecritical Yahoo group — "Wilhelm Reich's hypothesis criticisms; For
the first time in the scientific area, what the philosophs of every time,
mystics of any civilisation had intuitively presumed and christened of the
different names as prana, mana, chi, ki...etc ; what some other scientists as
Franz Anton Messmer, Burr, Reichenbach had used to experiment or use to heal
their patients without never really PROVING it ever exists (on name of "animal
magnetism", "odic energy"...etc) had been SCIENTIFICALLY demonstrated, measured
by Wilhelm Reich who has called it "orgone" (for orgasm, organism). "
	 * orgone_energy Yahoo group — "This list is dedicated to Orgone Energy. And
it uses in travel in time and space. Creating Magnetism, Electricity, Light,
Heat, Sound and Matter."
	 * OrgonomyMail-List Yahoo group — "The 'OrgonomyMail-List' is a private
discussion list and will focus on basic topics of: Wilhelm Reich and Orgonomy,
bions, cancer, cloudbusting, dorbusters, orgone medical research, oranur
experiment, orgone accumulators, orgonomic research equipment, oranur effects,
Reichian and other body-mind therapies, orgone energy, orgone therapy, research
and experimental setups, social and legal implications of Orgonomy, child
rearing without armor blocks [, etc.]."
	 * ParanoidTimes Yahoo group — "This group aims not only to inform each other
of issues which engender deserved doses of paranoia, but to serve as a
desensitization mechanism through which we can all learn to tolerate the highest
levels of paranoiac exposure. The group also offers refuge for those who are
prone to slip into complacency, and thus render themselves vulnerable during
such aberrant periods of irrational denial. Here you will find the elixir of
survival - the material by which you can restore your armor... and the stamina
to reacquire a sane and healthy degree of paranoia once again. We aspire to the
supreme state of hypervigilance, remaining ever mindful of that hallowed motto:
IF YOU'RE NOT PARANOID THEN YOU'RE NOT PAYING ATTENTION!"
	 * portlandconspiracycentral Yahoo group — "This site is dedicated to
discovering hidden manipulation behind world events. It has been said nothing in
Politics happens by accident, someone some group somewhere may be pulling
strings behind the scenes around the world. The common man is kept in the dark
always as to what is happening and who is doing what. This site is dedicated to
uncovering the hidden information that the controlled corporate news purposely
avoids to keep you uninformed and with the establshments plan."
	 * QuantumRadionics Yahoo group — "The study of radionics and related fields
and the effects of using computer technology to further these fields including
use of the computer program




[Non-text portions of this message have been removed]

Hola Folks!

7 years now, long enough..so decided to write it up here in Mexico;

http://www.keelynet.com/mexico/index.html

I need to locate the clear sky photos followed by the wisps, then clouds, then
rain...afraid its on my old win98 whose hard drive isn't quite right...also had
pics of the turret and tubes on the mount on the back of my truck...can't find
those either YET but do show parts of it with two diagrams so you can see how it
was setup.

Back in 2003, I had a local mexican friend help me with the runs done by the
side of the lake...didn't do flip so just ran it out of my backyard and that
seemed to work...I think the drain and water flow was more intense at my house
than at lakeside.

I have the parts all disassembled now, for the past 7 years actually, but keep
them in the event the lake starts to dry up again and I'll put it all together
and repeat the experiment.

After all Repeatability is everything in science.

Most people don't give such experiments any credence and I don't claim anything
because the lake was also being filled from dams...but the 'unusually high
rainfall' was what gives some credence to my little experiment.

Hi Jerry,

Thanks for the two goodies, :-0

Nice piece of info on that busting. If I remember right the comments of the
experts on busting, you have done just about everything wrong. I mean the
busting itself, the gismo looks all right. I am glad to see some superstitions
gone.

With kind regards, Slavek.


To: KeelyNet_Interact@yahoogroups.com
From: jwdatwork@...
Date: Tue, 6 Apr 2010 07:14:50 +0000
Subject: [KeelyNet_Interact] finally decided to document my cloudbusting
experiment




























       Hola Folks!



7 years now, long enough..so decided to write it up here in Mexico;



http://www.keelynet.com/mexico/index.html














[Non-text portions of this message have been removed]

Good job Jerry!

Keep up the good work!

Regards, Mike R.

-----Original Message-----
From: KeelyNet_Interact@yahoogroups.com
[mailto:KeelyNet_Interact@yahoogroups.com] On Behalf Of
slavek.krepelka@...
Sent: Saturday, April 10, 2010 8:55 PM
To: keelynet_interact@yahoogroups.com
Subject: RE: [KeelyNet_Interact] finally decided to document my cloudbusting
experiment


Hi Jerry,

Thanks for the two goodies, :-0

Nice piece of info on that busting. If I remember right the comments of the
experts on busting, you have done just about everything wrong. I mean the
busting itself, the gismo looks all right. I am glad to see some
superstitions gone.

With kind regards, Slavek.


To: KeelyNet_Interact@yahoogroups.com
From: jwdatwork@...
Date: Tue, 6 Apr 2010 07:14:50 +0000
Subject: [KeelyNet_Interact] finally decided to document my cloudbusting
experiment




























       Hola Folks!



7 years now, long enough..so decided to write it up here in Mexico;



http://www.keelynet.com/mexico/index.html














[Non-text portions of this message have been removed]



------------------------------------

========================================
     from Jerry Decker @ http://www.keelynet.com
    Order out of Chaos - From an Art to a Science
   Donations : http://www.keelynet.com/donate1.htm
Books/Videos : http://www.keelynet.com/products.htm
               MexiStim Energy Stimulator
   http://www.keelynet.com/mexistim/nexcrock.htm
                  * * * * * * * *
       Vanguard Sciences (eBooks and DVDs)
          http://www.vanguardsciences.biz
           The Physics of Crystals DVD
             Lil Pyramid Builder eBook
     High Voltage & Free Energy Devices eBook
  $$ 14 Ways to save Money on Fuel Costs $$ eBook
========================================Yahoo! Groups Links

Hello friends,

I recently have gone through a paper by Dr. Allan
Williams and here is the link, which is
http://www.globalwarmingsolutions.co.uk/use_of_convergent_nozzle_to_convert_enth\
alpy_into_kinetic_energy_and_solar_energy_into_electricity_in_the_convective_ene\
rgy_conversion_cycle.htm.
In this paper, Dr. Williams claimed that by using convergent nozzles,
efficiency can exceed the thermodynamic level in reality, but how still isn’t
clear to me. Whatsoever, at least it is clear that convergent nozzles can
increase pressure of a running fluid and it actually can convert enthalpy into
direct motion. Which may be very useful in electricity generation. I want
opinions of others regarding that matter.



[Non-text portions of this message have been removed]

Thank you Pranab,

It will come handy in some way, no need to think only wind.

With kind regards, Slavek.

To: KeelyNet_Interact@yahoogroups.com
From: pranabjyoti_calcutta123@...
Date: Fri, 16 Apr 2010 00:34:46 -0700
Subject: [KeelyNet_Interact] An essay on the use of convergent nozzles
































Hello friends,



I recently have gone through a paper by Dr. Allan

Williams and here is the link, which is
http://www.globalwarmingsolutions.co.uk/use_of_convergent_nozzle_to_convert_enth\
alpy_into_kinetic_energy_and_solar_energy_into_electricity_in_the_convective_ene\
rgy_conversion_cycle.htm.

In this paper, Dr. Williams












[Non-text portions of this message have been removed]

Actually I am curious to know that whether this can be applicable to
conventional thermal power plants or not. If yes, then the efficiency of
conventional thermal power plants and solar thermal power plants too, can be
increased dramatically.

--- On Fri, 16/4/10, slavek.krepelka@... <slavek.krepelka@...>
wrote:

From: slavek.krepelka@... <slavek.krepelka@...>
Subject: RE: [KeelyNet_Interact] An essay on the use of convergent nozzles
To: keelynet_interact@yahoogroups.com
Date: Friday, 16 April, 2010, 11:48 PM







 











Thank you Pranab,



It will come handy in some way, no need to think only wind.



With kind regards, Slavek.



To: KeelyNet_Interact@ yahoogroups. com

From: pranabjyoti_ calcutta123@ yahoo.com

Date: Fri, 16 Apr 2010 00:34:46 -0700

Subject: [KeelyNet_Interact] An essay on the use of convergent nozzles



Hello friends,



I recently have gone through a paper by Dr. Allan



Williams and here is the link, which is http://www.globalwa rmingsolutions.
co.uk/use_ of_convergent_ nozzle_to_ convert_enthalpy _into_kinetic_ energy_and_
solar_energy_ into_electricity _in_the_convecti ve_energy_ conversion_
cycle.htm.



In this paper, Dr. Williams







[Non-text portions of this message have been removed]
























[Non-text portions of this message have been removed]

Hi Pranab,

I would first find out if at least some conventional power plants are not
actually using the principle. I would find it more than probable. It is going to
be difficult with wind turbines of the present construction due to the necessary
dimensions and construction philosophy. The systems would have to be changed to
something like Francis turbines and the problem with size and position off the
ground would still persist.

With kind regards, Slavek.

To: KeelyNet_Interact@yahoogroups.com
From: pranabjyoti_calcutta123@...
Date: Fri, 16 Apr 2010 19:59:43 -0700
Subject: RE: [KeelyNet_Interact] An essay on the use of convergent nozzles




























       Actually I am curious to know that whether this can be applicable to
conventional thermal power plants or not. If yes, then the efficiency of
conventional thermal power plants and solar thermal power plants too, can be
increased dramatically.















[Non-text portions of this message have been removed]

So far, I have done some little study in this matter and found that at least all
the thermal or solar thermal power plants I have studies wouldn't use that
principal and there is very low chance that the rest, which I haven't studies
would use it. It's use is at present either nil or exceptionally rare. I
personally don't like that scenario.
--- On Sat, 17/4/10, slavek.krepelka@... <slavek.krepelka@...>
wrote:

From: slavek.krepelka@... <slavek.krepelka@...>
Subject: RE: [KeelyNet_Interact] An essay on the use of convergent nozzles
To: keelynet_interact@yahoogroups.com
Date: Saturday, 17 April, 2010, 10:10 AM







 











Hi Pranab,



I would first find out if at least some conventional power plants are not
actually using the principle. I would find it more than probable. It is going to
be difficult with wind turbines of the present construction due to the necessary
dimensions and construction philosophy. The systems would have to be changed to
something like Francis turbines and the problem with size and position off the
ground would still persist.



With kind regards, Slavek.



To: KeelyNet_Interact@ yahoogroups. com

From: pranabjyoti_ calcutta123@ yahoo.com

Date: Fri, 16 Apr 2010 19:59:43 -0700

Subject: RE: [KeelyNet_Interact] An essay on the use of convergent nozzles



Actually I am curious to know that whether this can be applicable to
conventional thermal power plants or not. If yes, then the efficiency of
conventional thermal power plants and solar thermal power plants too, can be
increased dramatically.







[Non-text portions of this message have been removed]
























[Non-text portions of this message have been removed]

Hola Folks!

Thank god for our strong magnetic field;

http://www.sciencenewsden.com/2010/marslosespartofitsatmospheretospaceduetosolar\
wind.shtml

The new study shows that pressure from solar wind pulses is a significant
contributor to Mars's atmospheric escape.

The researchers analysed solar wind data and satellite observations that track
the flux of heavy ions leaving Mars's atmosphere. The authors found that Mars's
atmosphere does not drift away at a steady pace; instead, atmospheric escape
occurs in bursts.

The researchers related those bursts of atmospheric loss to solar events known
as corotating interaction regions (CIRs). CIRs form when regions of fast solar
wind encounter slower solar wind, creating a high-pressure pulse. When these CIR
pulses pass by Mars, they can drive away particles from Mars's atmosphere.

The authors found that during times when these CIRs occurred, the outflow of
atmospheric particles from Mars was about 2.5 times the outflow when these
events were not occurring. Furthermore, about one third of the material lost
from Mars into space is lost during the impact and passing of CIRs.

Professor Mark Lester, Head of the Department of Physics and Astronomy
at the University of Leicester said: "The main reason it happens at Mars and not
at Earth is the lack of a magnetic field produced by the planet, which protects
the atmosphere at Earth.

Hola Folks!

Maybe you've heard about this;

http://forgetomori.com/2010/fortean/time-traveler-caught-in-museum-photo/

It's the short description for the photograph shown at the virtual Bralorne
Pioneer Museum, from British Columbia, Canada. The image can be seen
specifically on this page (scroll down to the middle), among other items of the
online exhibit. Did you notice anything out of place? Or perhaps, out of time?

The man with what appears to be very modern sunglasses seems to be wearing a
stamped T-shirt with a nice sweater, all the while holding a portable compact
camera!

Internet people reached to the obvious conclusion: it's a time traveller caught
on camera on 1940! Finally, we have proof!

If the story seems straight out of a movie and the photo is in itself a great
funny find, the most amusing thing i came up with while looking into this – as
an Internet person, on the Internet – was the reply for a skeptical, or perhaps
somewhat cynical comment on how spurious it would seem the idea that a time
traveler would want to visit the reopening of a bridge in some small town in
Canada.

Read this on Doc Brown's voice: "Of course, because we know nothing happened
there right? But if we are considering time travel, how can we know if in some
other timeline something historical happened right there?"

Indeed! Once you consider time travel, everything changes. But before writing
Hollywood scripts, let's get back to reality and ask again: is the photo
evidence of a time traveller?
-------------------
I blew up the photo and noticed the mans' face appears to be pasted on to the
back of the head.

Note the perfectly vertical line from the upper side of his head, past his ear
with the curiously dark nearly straight line in it, down his neck to his shirt.

Note how the ear is in TWO PIECES that don't seem to match.

A blowup of the camera shows it doesn't appear to be modern or digital, closest
I could find was a 1926 Kodak Hawkeye camera -
http://www.digicamhistory.com/1920s.html

I seriously doubt this guy belongs in this photo and was never there...it's a
great hoax but just tain't so....just my two cents worth...

Hola Folks!

I don't think this is correct...I'd bet on infinite dimensions that are
temporally interphased;

http://news.nationalgeographic.com/news/2010/04/100409-black-holes-alternate-uni\
verse-multiverse-einstein-wormholes/

According to a mind-bending new theory, a black hole is actually a tunnel
between universes—a type of wormhole. The matter the black hole attracts doesn't
collapse into a single point, as has been predicted, but rather gushes out a
"white hole" at the other end of the black one, the theory goes.

According to the new equations, the matter black holes absorb and seemingly
destroy is actually expelled and becomes the building blocks for galaxies,
stars, and planets in another reality.

There is at least one way to test Poplawski's theory: Some of our universe's
black holes rotate, and if our universe was born inside a similarly revolving
black hole, then our universe should have inherited the parent object's
rotation.

If future experiments reveal that our universe appears to rotate in a preferred
direction, it would be indirect evidence supporting his wormhole theory,
Poplawski said.
---------------------
Having been really heavy into UFOs for many years, looking for technical clues
in the various sightings and claims of contact, I always found it fascinating
the claims of Billy Meier in Switzerland.

He claims when he talked with this alien Semjase, she told him dimensions all
exist as separated by time. She told him, as a rough analogy, if you take a
second and chop it into 1000 pieces, each piece would be a totally different
universe, INTERPHASED with our universe and all the others...but that shifting
your time reference you could easily move yourself and your local environmen (a
ship) to any of the other dimensions.

Now this tied in with a very strange story referred to as Ong's Hat or the
Incunabula Papers. In this story, the claim was a secret group had built an
'egg' in which a person would ride nude. In the egg was a TV screen and stereo
headphones where a specific changing geometry on the screen was matched to the
same audio and I think a magnetic field surrounding the body to match. The idea
being to put the person and the egg into resonance with another dimension, thus
allowing transport to that dimension.

Each dimension had mostly the same things so there were unlimited earths
coexisting with us now and that by 'tuning' to them you could transport. So if
you transported from this x,y,z location to one of the other earths, you would
find it hadn't developed and was still a jungle or forest or desert. The claim
was they had discovered 4 earths, identical but not populated or developed.

And that ties into the idea of remote viewing...where viewers are given a
specific series of numbers and sent TO THOSE COORDINATES....they gather
information (mentally) and return where they are debriefed separately and the
ones whose information matched indicated a true visit to that location....that
secret projects have been mapping these coordinates so they could return at will
for spying or whatever...

All totally fascinating to me...what if we had a book of coordinates and an
'egg' we could teleport to anywhere at will.

Ah, one other thing, according to the Ong's hat story, over time the inventors
figured out how to transport not just a nude person but anything they wanted to
a similar earth...this way they could take clothes, tools, parts, construction
materials, whatever they wanted...and their favorite thing was Airstream
trailers because they were self-contained for living anywhere.

One other point...the coordinates are X, Y, Z and T (for time)...think of
standing 300 feet from a bank vault...you shift to another earth, walk to the X,
Y, Z coordinate, then teleport back to our earth but you arrive INSIDE THE
VAULT...you take what you wish, teleport to the other earth, walk or drive to a
safe coordinate and teleport back to earth...this is how these people took
whatever they needed to support themselves...food, lumber, building materials,
etc.

This lends a whole different 'dimension' (pun intended) to the idea of
shrinkage...how would you stop them???

Hola Folks!

This page contains still photos taken from a video that is linked on the page;

http://divinecosmos.com/index.php?option=com_content&task=view&id=300&Itemid=70

One of the witnesses, Karl Wolfe, testified that he was in a private area of
Langley Air Force Base, where the NSA was bringing in information from the Moon.
A fellow airman second-class showed him photographs of ruins on the Moon.

There were more conventional-looking buildings and roads as well as dome and
mushroom-shaped buildings. You can see an excellent, essentially complete
summary of his testimony on video here.

You also see striking examples of obvious structures that have been airbrushed
out...

The white lines were drawn in by the videographer to show where the blurry areas
are - but in the following pictures you get a closer look at various examples...
-------------------------
Fascinating...I happen to think most planets are hollow..including the
moon...much more to it than I can state here...

There is a new mathematical technique that has been used to create a program
that will deblurr photos...

03/26/10 - 'Compressed Sensing' for Enhancing Photos

A relatively new field of mathematics called "compressed sensing" is being used
to create high resolution data from a low resolution sample by using an
algorithm to calculate the most simple and obvious substitute for a missing
piece of information: If it sees a cluster of green pixels near one another, for
instance, it might plunk down a big green rectangle that fills the space between
them. If it sees a cluster of yellow pixels, it puts down a large yellow
rectangle.

In areas where different colors are interspersed, it puts down smaller and
smaller rectangles or other shapes that fill the space between each color. It
keeps doing that over and over.

Eventually it ends up with an image made of the smallest possible combination of
building blocks and whose 1 million pixels have all been filled in with colors.
Besides enhancing photos, the l1 minimization algorithm can also be used to
restore musical recordings, pinpoint enemy radio signals, speed up MRI scans,
allow digital cameras to use far less memory and battery power to achieve a
similar final result, etc.. - Full Article Source
--------------------
I wonder what if anything, application of this technique to the blurred moon
photos would produce???

http://gammasquad.uproxx.com/2010/03/enhance

Hola Folks!

On youtube there is a post for this gravity motor...uses a weight and two
magnets to keep it running.

04/18/10 - Gravity Magnetic Motor (Hand Made)

A home made O.M.E.G.A. device "runs" by combined, natural phenomena: Application
of Opposing Magnets, Accelerating Gravity Attribute and centrifugal mass in
motion. Awkward characteristics, limited by size yet would sustain the "mimic"
of initial input energy over limited time.

(Personally, I do not feel this gadget has properties of "overunity." I feel all
it did was "mimic" the energy taken to start the motion.)

The second "clip" ran eventually 1 day and most of one night. A friend destroyed
the endeavor. I hope the annotation at the end may bring somewhat of a deeper
meaning to the post...

the third clip "version" worked (approx 3 ½ days) The "rod" from the wheel to
the magnet failed in the middle from stress. It did not have a steady rpm. I
feel inferior materials and God knows what all led to it's inevitable stopping.

  - Jean Bernoulli: "...any motion which exists in nature can be used to support
a perpetual motion. In these instances such machines cannot be regarded as
purely artificial perpetual motion, but rather as a combined perpetual motion
because their motion is assisted by nature." - Full Article Source

http://www.youtube.com/watch?v=XKtIsrc-LHs&

Hola Folks!

I think they have this all wrong. In the past our ancestors, some of them at
least, had the knowhow to control local gravity so they could make anything they
wanted lighter or heavier or light enough to 'float' in the air. There are
numerous drawings, carvings and legends about flyind gods, angels, flying
demons, Assyrian and Sumerian kings and warriors (my favorite)...

Thus in the past, man could fly at will using mechanical wings, jets or fans,
anything to give it the push. And the beauty is you fall slowly. Of course you
also have less inertia and are subject to being swept away by any brisk wind but
thats recoverable.

That is why I want to do gravity research because I think I have the connections
and correlations figured out;

http://www.vanguardsciences.biz/vsdl.html

Anyway, cellular memory would evoke dreams in modern man, hearkening back to the
time(s) when man flew like a bird. Weight DID NOT MATTER, since they had
discovered how to control gravity influx at will and thus they could increase or
decrease 'weight' as they wished.

I see confusion on many sites where people don't seem to grasp true gravity
interactions and claim electrostatic lift or magnetic repulsion are
'anti-gravity'...nothing of the sort...true gravity control is when we learn to
manipulate the flow of zpe into our the neutral centers of our test mass,
whether it be our own bodies or a ship or machine surrounding us.

Here is the dream article...

http://www.huffingtonpost.com/anne-hill/dreams-of-falling-and-fly_b_533490.html

What is the difference between falling and flying in dreams? Some people would
say it is a matter of attitude, not altitude.

With this body memory in mind, I drifted back into the dream, where I was still
falling from 35,000 feet. As I tumbled through the sky, the lucid "me" in the
dream organized my energy and got into a ready stance. Effortlessly my body
stopped rolling and became upright, and soft as a feather I landed on ground
that was not two inches below my feet.

I felt buoyant and relaxed, as we do when we experience a moment of grace. It
was such a profound reversal of fortune, such a sudden shift, that I think of it
to this day when boarding airplanes. I also think of it when people talk to me
about their flying dreams.

Many dreamers consider their dreams of flying some of their most ecstatic
experiences. As a dream consultant, I have known people who choose to fly every
time they become lucid in their dreams. They can't imagine a more positive thing
to do in dreams, and are surprised when I offer them a few caveats.

Yes, flying is ecstatic. It can speak of great creativity and imagination, a
capacity for joy that affects everyone around us. But flying can also mean
avoidance, an inability to focus and follow through on things, and a lack of
concern for others.

Hola Folks!

I just recently posted a PDF of the 'Smoky God' (I know, it should be smokey but
thats how the authors spelled it)...it tells the tale of a guy when he was a
teenager, voyaging to the center of the earth;

http://www.vanguardsciences.biz/

Did Norseman Olaf Jansen actually travel to world within the earth? Did he
create the story to cover the death of his father on their ill-fated boat
voyage?

Why would he stay in a mental institution (most of his life, some 70 years)
rather than recant his original story about their trip through the pole and down
into the earth, to encounter all manner of marvelous wonders and giant humans?

Olaf Jansen makes the startling announcement through me, an humble instrument,
that in like manner, God created the earth for the "within" - that is to say,
for its lands, seas, rivers, mountains, forests and valleys, and for its other
internal conveniences, while the outside surface of the earth is merely the
veranda, the porch, where things grow by comparison but sparsely, like the
lichen on the mountain side, clinging determinedly for bare existence.

Take an egg-shell, and from each end break out a piece as large as the end of
this pencil. Extract its contents, and then you will have a perfect
representation of Olaf Jansen's earth. The distance from the inside surface to
the outside surface, according to him, is about three hundred miles.

The center of gravity is not in the center of the earth, but in the center of
the shell or crust; therefore, if the thickness of the earth's crust or shell is
three hundred miles, the center of gravity is one hundred and fifty miles below
the surface.

In their log-books Arctic explorers tell us of the dipping of the needle as the
vessel sails in regions of the farthest north known.

In reality, they are at the curve; on the edge of the shell, where gravity is
geometrically increased, and while the electric current seemingly dashes off
into space toward the phantom idea of the North Pole, yet this same electric
current drops again and continues its course southward along the inside surface
of the earth's crust.

On the top of a high mountain, Olaf Jansen, the Norseman, claims to have
discovered the long-lost "Garden of Eden," the veritable navel of the earth, and
to have spent over two years studying and reconnoitering in this marvelous
"within" land,

     • exuberant with stupendous plant life and abounding in giant animals;
     • a land where the people live to be centuries old, after the order of
Methuselah and other Biblical characters;
     • a region where one-quarter of the "inner" surface is water and
three-quarters land; where there are large oceans and many rivers and lakes;
     • where the cities are superlative in construction and magnificence;
     • where modes of transportation are as far in advance of ours as we with our
boasted achievements are in advance of the inhabitants of "darkest Africa."

The distance directly across the space from inner surface to inner surface is
about six hundred miles less than the recognized diameter of the earth.

In the identical center of this vast vacuum is the seat of electricity -- a
mammoth ball of dull red fire -- not startlingly brilliant, but surrounded by a
white, mild, luminous cloud, giving out uniform warmth, and held in its place in
the center of this internal space by the immutable law of gravitation.

This electrical cloud is known to the people "within" as the abode of "The Smoky
God." They believe it to be the throne of "The Most High."
-----------------------
Some thoughts on the moon being hollow and artificial;

http://www.keelynet.com/unclass/luna.htm

I have two old files from the KeelyNet BBS, Center1 and Center2 which deal with
gravity anomalies. Can't find them online but here are some extracts;

From Center1;

Earth's "Center of Gravity" - Up or Down?

Why was it that at the turn of  the century, the Geodetic Survey Department of
both the French and United States governments made certain tests  which upset
the Copernican theory, then DECIDED THAT THEY SHOULD BE KEPT SECRET?

...in 1901, one of the Geodetic surveyors happened to be working in the vicinity
of the Tamarack mines near  Calumet,  Michigan.   He  contacted  the  chief
engineer at Tamarack,   and  informed   him   of   the   information transmitted
by the French government.

Two mine shafts  were selected, and plumb lines EXACTLY  4,250  feet long were
suspended IN EACH MINE. At the end  of  these lines a SIXTY POUND BOB was hung. 
In order to PREVENT MOVEMENT THROUGH A  HORIZONTAL   DIRECTION,  each  bob  was
suspended in a tank of oil placed at the bottom of the mine shafts.

In this way, it was reasoned, MAGNETIC FORCES COULD NOT AFFECT THEM. The lines
used  to  suspend the bobs were No. 24 piano  wires.   For  twenty-four hours
the  lines  were  allowed  to  hang, so that there  would be NO POSSIBILITY OF
MOVEMENT from putting them in place still  remaining in the lines.  The
measurements were begun.

It was then  that  it  was  discovered   that  the  French  Geodetic  engineers
had NOT MADE A MISTAKE.  Careful re-checking  proved  that  the lines, CONTRARY 
TO  EXPECTATIONS,  were  FARTHER  APART  AT THE  BOTTOM THAN AT THE TOP!!

There can be only ONE IMPLICATION  to  such  a  strange result - the  center of
gravity is not, as previously believed, at  the  center of  the Earth, but  in 
fact, IT MUST BE ABOVE THE SURFACE OF THE EARTH,  SOMEWHERE IN SPACE!!!

If these two lines, formed by the  suspended plumb lines, were to be  EXTENDED
UPWARD, they would MEET SOMEWHERE in the void AWAY FROM THE EARTH, and that
point, BY ALL THE RULES OF GRAVITATIONAL ATTRACTION,  SHOULD BE THE CENTER OF
GRAVITY OF THIS PLANET!

The center of gravity, according to  the plumb lines, was a SPHERE'S  SURFACE,
some 16,000 MILES IN DIAMETER!! ANY PLACE, 4,000 MILES UP, WAS THE CENTER OF
GRAVITY!! Can we blame the Tamarack engineer for going down  in  his  mine and
maintaining a grim silence FROM THAT MOMENT ON??

A United States Geodetic Survey crew for two years conducted further
experiments, among them  measuring  the  surface  of  a long lake in Florida on
the theory that WATER CONFORMS  TO  THE TRUE CURVATURE OF THE EARTH'S SURFACE,
REGARDLESS OF HOW THE LAND MAY  BE, thus giving  A TRUE LEVEL  -  only  to  find
that  WATER  CURVED  UPHILL IN EACH  DIRECTION RATHER THAN DOWNHILL!!

(there is too much to post here...)
----------------
and from Center2;

Placing the  center  of  gravity  at Earth's  radius  IN  SPACE between the Van 
Allen  radiation belt seems like a modified version of the old theory of gravity
being  a  PUSH of SPACE CHARGES instead  of a PULL, with the larger sphere of
matter HAVING A GREATER RATE OF ABSORPTION.

The exact  site of the French plumb bob tests  is  of  interest ESPECIALLY if
near  Calumet,  Michigan,  which  has  an  approximate  latitude of 47  degrees 
North.    With   plumb   line  DIVERGENCIES  theorized as being CAUSED BY
GRAVITY VARIATIONS due  to the NEARNESS  of HIGH DENSITY or MASS, there may be a
connection with the Michigan  tests being located in an iron-ore belt.

Although gravity  readings  near  mountain masses MANY TIMES DO NOT INCREASE as
expected, one of  the  highest  gravity  readings in recent times has been in
mountainous Cyprus.

A current theory surmises CONTRACTION of the Earth  has  CEASED and EXPANSION is
NOW TAKING PLACE accompanied with a DECREASE IN THE FORCE OF GRAVITY.
------------------
And finally, this gravity map study;

04/15/10 - Europe's Goce satellite probes Earth's gravity

Europe's Goce satellite is returning remarkable new data on the way the pull of
gravity varies across the Earth. Scientists say its first maps clearly show
details not seen in previous space and ground measurements. "There is a
tremendous amount of geophysics in these plots," explained Rune Floberghagen,
Esa's Goce mission manager. "You see where there are big variations, for example
in the mountain range of the Andes, or the Mariana Trench, or the Indonesian
Arc, or the Himalayas. In fact, on most of the continents, you see a lot of
variation," he told BBC News.

The maps reproduced on this page illustrate "gravity gradients". The red colours
indicate a positive variation in gravity moving from one place to another - i.e.
places where Earth's tug becomes greater.

The blue colours indicate a negative variation in gravity - places where Earth's
tug is a little less. Simply put, if you were to take some bathroom scales to
these locations you would weigh fractionally more in red places and weigh less
in blue ones.

Most people are taught at school that the acceleration due to gravity at the
Earth's surface - known as g - is about 9.8m per second squared. But, in truth,
this figure varies around the planet depending on the nature of the material
underfoot.

The planet is far from a smooth sphere; the radius of the globe at the equator
is about 20km longer than at the poles. This ellipsoid is then marked by tall
mountain ranges and cut by deep ocean trenches. The Earth's interior layers are
also not composed of perfect shells of homogenous rock - some regions are
thicker or denser. Such factors will cause g to deviate from place to place by
very small but significant amounts.

The Gravity Field and Steady-State Ocean Circulation Explorer (Goce) maps these
differences with a state-of-the-art gradiometer produced by the French Onera
company. The instrument is sensitive to accelerations of about one-tenth of a
millionth of a millionth of g. And the gradiometer measures these accelerations
across all three axes of the spacecraft to obtain a multi-dimensional view of
the Earth's gravity field. "These are by far the smallest accelerations ever
measured from orbit," said Dr Floberghagen. The Goce team stresses that its data
is not yet fully homogenous; some areas of the Earth are currently covered
better than others. This is evident in the diagonal stripes that can be seen in
a number of the maps.

The scientists say that some work also remains to be done in understanding how
best to process the data. Nonetheless, it is hoped that sufficient high-quality
information will have been gathered in the opening months of the science
campaign to construct what geophysicists call a geoid.

This is a special type of Earth model which traces its idealised "horizontal"
surface - the plane on which, at any point, the pull of gravity is perpendicular
to it. If you could put a ball on this hypothetical surface, it would not roll -
even though it appears to have slopes.

The geoid is of paramount interest to oceanographers who study the causes of the
"hills" and "valleys" on the sea surface. If local gravity differences are not
pulling water about to create these features, then other factors such as
currents, winds and tides must be responsible.

Even at its ultra-low altitude of just 254.9km, Goce requires little effort from
its propulsion system to maintain a steady orbit and keep itself from falling
out of the sky. / Did they say 'gravity gradients'? Well then, Who's your daddy?
- Full Article Source

http://news.bbc.co.uk/2/hi/science/nature/8408957.stm

Hola Folks!

If you have a few minutes...when I moved KeelyNet from the Dan's server in
Dallas to the HostGator Linux server, I found it wouldn't accept any upper case
characters...holy crap...

So I had to change all my files to all lowercase...thought I had them all thanks
to a program I ran on each directory but I missed some of the interact archive
folder names...the archive files were ok, just the folder names had upper case A
in Arc...didn't realize it til tonight when a link on another site gave me a 404
error...

Changed the folder names to all lowercase and now the archives come up. This is
one of the files I wrote to some kids wanting to do a school paper on the
Philadelphia Experiment...talk about confusing them....maybe I went WAY
overboard...

Much as I like and respect Tom Bearden, he often does this going overboard in
answer to a simple question...but he just wants you to understand the whole
thing...

For a hoot, you might want to read it now that a 404 isn't the end result;

On warping young minds

http://www.keelynet.com/interact/arc_1_99-4_99/00000516.htm

The files are also all cross-linked as to Date, Thread, Subject and author. Here
is the subject index if you want to do some data mining;

http://www.keelynet.com/interact/arc_1_99-4_99/subject.htm#516

Hola Folks!

(not sure what is going on here, but this is the 3rd time I've posted this as 1
& 2 didn't go through, weird!)

Here is an introduction to a charming tale about 'buoyancy' through negative
gravity, why don't they make movies about stories like this?

http://keelynet.wordpress.com/2009/03/07/a-tale-of-negative-gravity/

An enchanting story about controlling buoyancy by writer Frank R. Stockton. Note
this doesn't appear to be true gravity control, but I loved the description of
his device.

"I had long been anxious to discover the means not only of producing, but of
retaining and controlling, a natural force, really the same as centrifugal
force, but which I called `negative gravity.' This name I adopted because it
indicated better than any other the action of the force in question, as I
produced it.

Positive gravity attracts everything toward the centre of the earth. Negative
gravity, therefore, would be that power which repels everything from the centre
of the earth, just as the negative pole of a magnet repels the needle, while the
positive pole attracts it.

My object was, in fact, to store centrifugal force and to render it constant,
controllable, and available for use…"

On a Personal Note – Years ago, at one of our Vanguard Sciences Roundtables in
Dallas, a man who was President of a Gravity Research organization swore to me
that he received a call from a stranger telling him he had developed a means to
reduce local gravity to control the weight of any mass to which it was attached.

The man telling me this didn't believe it so the caller offered to demonstrate
the device but he wouldn't permit any photos or give any details of how it
worked. My friend drove out to the far end of a mall in Waco, Texas where the
caller was sitting inside a Jeep. No one was else was around so they had no fear
of being interrupted.

They greeted each other and the caller got inside the Jeep, put it in neutral
and asked that my friend get behind the Jeep and push it to get an idea of how
hard it was to move. The caller sat inside the Jeep while my friend pushed it
about 5 feet. The caller put on the brakes, turned on the engine and backed it
up to the original location.

My friend walked to the drivers side where the caller had turned off the engine.
He reached under the dash and flipped a hidden toggle switch. The caller sat in
the Jeep and asked my friend to again go to the rear of the Jeep and push. This
time, the Jeep moved with the touch of a finger! Like a giant balloon offering
almost no resistance as it travelled a good 10 feet with the slightest push.

Of course, he was astonished and wanted to know more. The caller got out of the
Jeep, went to the front and crouched down, pointed to a small black box mounted
inside the wheel well above the tire. A cable ran from the small black box to a
device inside the Jeep which the switch controlled.

Each wheel had an identical device and cable leading to the inside control
device. The caller said when power was applied, the local gravity was repelled
so that the Jeep was enveloped in an energy field where gravity and inertia were
reduced, that he had it set for a given percentage of weight loss but could
adjust it to whatever level he wished, even to outright levitation.

The caller would not provide any details about the nature of the box, but my
friend thanked him for the demonstration, turned off the gravity nullifier
device and drove off into the sunset leaving my friend baffled at what he had
just seen.

As is so often the case with such stories, I asked my friend if he got a name
and contact information for this mystery inventor and he said yes, but his wife
washed his clothes where he had left the paper so it was destroyed.

I asked him if he noticed anything unusual and he said he thought there was a
slight whirring sound when the device was energized which led us to think it
could be a unidirectional, inertial technique to redirect a spinning weight in
an upward direction.

And now…enjoy the story on `Negative Gravity'… – Source

http://www.keelynet.com/negativegravity.htm

Hola Folks!

This recent volcano activity has revealed tremendous lightning activity to show
the free energy all around us.

04/21/10 - Volcanic Lightning and how it works

All told, there have been more than 150 different eruptions over the past couple
of centuries where volcanic lightning has been recorded. In fact, I've managed
to dig up some photographs of volcanic lightning from before I was born! Here's
Mount Vesuvius -- and the accompanying volcanic lightning -- from 1944! Okay, so
now you're convinced that lightning happens in volcanic ash all the time. Yes,
it makes for a spectacular picture, but how do you get this in the first place?

Well, what is lightning? You create a big enough electric potential difference
between two places, and you can get all of these excess charges to "jump down"
to the lower potential. In air, it takes a voltage of about 33,000 Volts (!) to
get a spark to jump even one centimeter!

Lightning that goes from a high cloud down to the ground can have a voltage
difference in excess of a billion Volts! You can do this because you can get a
huge amount of charge separation. For example, in a big lightning strike, you
separate out about 1020 electrons!

But ash and rocks -- even molten rock -- are electrically neutral, right? So how
to we get a big voltage from neutral matter? Thankfully, the ash that comes out
is hot enough so that not every particle is neutral: many are positively charged
ions and many are negatively charged ions.

If you can make something push the positive ions differently than it pushes the
negative ones, you can create a charge separation! If you get enough charges
separated, you can make a large enough voltage to give you lightning! -

(This reminds me of Paul Clint back in 2001 who was claiming he got up to
continuous 2 foot arcs from his specially doped electrets.

http://keelynet.com/electret.htm

He said long wire antennas or anything that would interface with large volumes
of moving air could produce all the energy anyone could ever want, just as
Perrigo did back in the 1920s.

http://www.rexresearch.com/perrigo/perrig.htm

The guy told me the more dust, sand, snow, etc. in the air, the more electricity
you could extract from it. - JWD) - Full Article Source

http://scienceblogs.com/startswithabang/2010/04/volcanic_lightning_eyjafjallaj.p\
hp
-----------------------
It is one way to harvest energy from vibration;

Energy Harvesting from Vibration Using Polymer Electret;
www.thtlab.t.u-tokyo.ac.jp/Doc/ysuzuki_MHS08.pdf
-----------------------
I also found something interesting with the Testatika and this comment from the
electret paper by Paul Clint;

"If you take one electret and one magnet you will get a surprise. When not in
motion, these two differing objects will have no effect on one another. It is
only when you move them that anything happens ... and ... it is not the familiar
attraction-repulsion. When a pole of the magnet is in relative motion to a
"pole" of the electret they push each other at 90 degrees to the direction of
motion. The effect is entirely odd and immediately unfamiliar (unless you are a
physics student)."

Electrets vs Dielectric Absorbers;

http://www.linux-host.org/energy/electrets.htm

The process of making an electret involves heating up a plastic material,
applying a high tension electric field across it's two faces, and letting the
plastic cool down (and solidifying again) only removing the high tension
electric connection after the plastic has solidified. The high tension electric
field polarises and orientates the molecular interfaces within the plastic
(dielectric) and because the material is soft (or fluid) they readily align to
the direction of the electric field; that's why the high tension has to be
continued until the plastic has cooled down and solidified to lock the molecules
in place. After the plastic has solidified it exhibits an electrical potential
difference.

DIELECTRIC ABSORPTION is almost exactly the same although it is not so permanent
an effect as that which the electret process produces.

From the early days of electronics when research into insulators and dielectrics
was almost as important as research into conductors, it was noted that
dielectrics exhibited 'elastic stress' whereupon they would absorb amounts of
electricity into their structure. This 'mystery' was subjected to many theories
and much experimentation during the 1800's but it was James C. Maxwell N5 who
came up with a mathematical formulae for it and the explanation that it resulted
from charge accumulations on the interfaces separating regions of different
components that make up the dielectric material itself.

This 'interface polarisation' (as it is now called) is slow to react in a
reversing electric field and this can be an advantage, especially if the effect
is magnified N6, as I'm sure it has been and then utilised ingeniously within
the circuit of the Testatika generator.

For when each dielectric block has a current applied to it, it will polarise its
structure of molecular interfaces with positive and negative charges (see
fig.3), but when the applied current is reduced to nothing the positive charges
tend to move so slowly that for all intents and purposes they remain stuck, and
so when the next 'pulse' of electric charge comes in it compounds upon the
previous unmoved charges, and so on and so forth, hence the accumulative effect
which carries on pumping more and more electric charge until the blocks become
saturated.

Once this occurs, and the alternating field is continued there is formed a
highly mobile space-charge of electrons around the outer surface of the
dielectric blocks, the mobility of which then triggers off the electron
avalanche effect where, as Flanagan has evidenced, it accelerates the electrons
in the air toward the dielectric blocks to such a high speed that they collide
with other air molecules to knock off even more electrons. Hence they create a
local ionisation of the surrounding air.

N1 - The list of different `plastic' materials to experiment with is extensive,
aside from the usual plexiglas, perspex, acrylic, epoxy, and glasses, and teflon
there is also; lucite, nylon, acetal, polycarbonate, pvc, abs, pet, uhmw pe,
hdpe, polypropylene, peek, pes, pei, psu, ppo, ptfe, pvdf, asa, fep, ca, eva,
pj, pp, psu, san, sb, to name but a few. All of which react differently when
charged up, and all of which relate to the triboelectric charging principles -
whereby some plastics are charged positive (donator) and some are negative
(acceptor).

N6 - See "Dielectrics" by P.J. Harrop (1972) p71 for dielectric absorption.
Doping the dielectric with, for instance, paramagnetic particles will increase
the amount of, and surface area of, the interfaces; which is one reason why
their inclusion in a dielectric increases the ionising effect. But see the
Patrick Flanagan Electron Field Generator page too.
--------------------
I have heard of plans for a free energy generator that used electrets to collect
and store power from the air, enough to run your house, but have never seen
those plans.

I did a search and the closest to this that I can find is;

http://www.angelfire.com/ak5/energy21/electret.htm

Electrets today are used in modern tape recorders for microphones and to a
limited extent in flat wall loudspeakers that were popular some time ago.

Many materials can obtain a surface electrostatic charge and when then come in
contact with another material the charge is either changed or neutrallized.
However there are certain materials that will replace that charge without
addition current charge,

If I can remember sugar crystals are one but don't quote me on that maybe
someone more knowledgable than myself can send me a complete list.

Construction

One material is called lucite and a electret can be made in the following
manner.

It seems the action of electret is formed when a suitable material is in a
molten state and under the influence of an electrostatic and then left to cool
under the influence of said electrostatic field.

Making One

You will first need a high voltage source.

Taking high voltage from a Wimshurst machine or a Van de Graaf machine may also
prove suitable.

Next you will need to cut a sheet of lucite 6 inches by 6 inches about a quarter
of inch thick, if I can remember correctly.

You will also need two thin sheets of aluminium cut to 6"x6" also

Two house hold bricks and a good heat source such as a barbecue bicket.

(see article for diagrams)

Light the bricket and then turn on the High Voltage Supply. and keep it going
until The lucite is in a molten state and until the brickete is completed
finished burning

Turn off High Voltage source and then carefully remove the two metal plates with
the lucite and completely wrap it in metal foil and store for two weeks in a
suitable storage area.

Connect a piece of joined insulated wire to each plate and then by disconnecting
from the two metal plates a spark will be given off

After a suitable time period (seconds) you will be able to repeat this step
again and again.

To help you keep the electret working when you have finshed experimenting with
it ,keep it wrapped in foil as before.

An interesting observation and by no means confirmed is the following
observation made by a visitor who was able to see to the Swiss ML machine
working (see article from main index)

Claimed that the disks were made of persplex or could be lucite type material .
----------------------------
Clint says the best way he found was to discharge into batteries and use the
batteries for your loads.

"One new technique is to mix ferrite granules into the dielectric when it is
formed. A magnetic field applied at a right angle to the resulting electret's
field has a dramatic effect in maximizing and recharging the electret effect."

"The only practical method I have found to date is to charge a battery. There
are, however, a number of people who have received patents on high voltage
electrostatic motors."

QUESTION: How can you charge a battery with high voltage static current?

ANSWER: Thus far, I have devised two methods. The first is simple and
inexpensive but only 15-20% efficient. It simply involves breaking the current
into pulses with a spark gap, and then tranforming the voltage down and current
up with a coil and increasing the pulse duration with a capacitor in parallel
with the coil.

The second method uses a micro processor to monitor current and voltage. The
impedance is then adjusted to make the charging current as smooth as possible.
This circuit can also easily protect a battery from overcharging.

Hola Folks!

I found the 'plans' being sold by bogus Creative Research claiming free energy
from electrets;

http://74.125.45.132/search?q=cache:EcsZUZF17Y4J:www.scribd.com/doc/7535805/eBoo\
k-Free-Energy-Capacitors-That-Recharge-Themselves+electret+free+energy&cd=10&hl=\
en&ct=clnk

The actual site isn't working so this is the cache...so the drawings don't show.

It's the same stuff on the web where you use lucite instead of wax...




--- In KeelyNet_Interact@yahoogroups.com, "jwdatwork" <jwdatwork@...> wrote:
>
> Hola Folks!
>
> This recent volcano activity has revealed tremendous lightning activity to
show the free energy all around us.
>

Hola Michael!

Michael Vye wrote:
  >
  > I have been trying to build a solid state device employing
  > a thyristor and capacitors.
  >
  > The thyristor can generate tremendous voltage and current
  > output. My problem is storing the 600v and 100 amp output
  > in capacitors, any suggestions?
  >
  > Michael Vye
  > (address & phone cut out)
  > E-Mail = vyeking8 sbcglobal.net

I will post it to the KeelyNet discussion list and see what kind of
advice you get, if any.

I did a search and found some serious high voltage, high current
capacitors here (and you can email them with your specific application
for technical help);

http://www.amazing1.com/capacitors.htm
----------------------
How many joules = 1 amp?

This is not a valid question by itself. Joules are units of energy,
while Amps are units of electrical current. However, if you also know
the Voltage of the electrical current, you can multiply the
Current[Amps]*Voltage[Volts] to get the Power in Watts. Watts are
equivalent to Joules per second. If you then know the amount of time of
the current flow, you can calculate the total number of Joules by
multiplying the Power[Watts]*Time[seconds] = Energy[Joules]
-----------------------
tutorial on supercaps;

http://www.mpoweruk.com/supercaps.htm
-----------------------
here is another company who offers technical support and advice for your
application;

http://www.magnewin.com/

and another supplier, there are many more...most of who will be glad to
suggest ways to resolve your problem;

http://www.ga-esi.com/EP/capacitors/index.php

good luck!

---
========================================================
         from Jerry Decker @ http://www.keelynet.com
             Hope through Science and Invention
        Order out of Chaos - From an Art to a Science
      Donations : http://www.keelynet.com/donate1.htm
    Books/Videos : http://www.keelynet.com/products.htm
                 MexiStim Energy Stimulator
       http://www.keelynet.com/mexistim/nexcrock.htm
             Vanguard Sciences (eBooks and DVDs)
                http://www.vanguardsciences.biz
========================================================

Hi all,
I would offer a Thyratron if you want serious current switching of
1000+ amps, fast pulsing, and very high voltages.
Next would be IGFETs, as used in Hybrid vechile motor switching. The
can operate at about 600VDC, fast switching and high currents.

eBay sometimes has good high voltage cap deals, generallyvuaed for EMP
type pulsing, or Lightning type tests.

v/r
Ken Carrigan

On Apr 27, 2010, at 3:40 AM, Jerry Decker <jdecker@...> wrote:

> Hola Michael!
>
> Michael Vye wrote:
> >
> > I have been trying to build a solid state device employing
> > a thyristor and capacitors.
> >
> > The thyristor can generate tremendous voltage and current
> > output. My problem is storing the 600v and 100 amp output
> > in capacitors, any suggestions?
> >
> > Michael Vye
> > (address & phone cut out)
> > E-Mail = vyeking8 sbcglobal.net
>
> I will post it to the KeelyNet discussion list and see what kind of
> advice you get, if any.
>
> I did a search and found some serious high voltage, high current
> capacitors here (and you can email them with your specific application
> for technical help);
>
> http://www.amazing1.com/capacitors.htm
> ----------------------
> How many joules = 1 amp?
>
> This is not a valid question by itself. Joules are units of energy,
> while Amps are units of electrical current. However, if you also know
> the Voltage of the electrical current, you can multiply the
> Current[Amps]*Voltage[Volts] to get the Power in Watts. Watts are
> equivalent to Joules per second. If you then know the amount of time
> of
> the current flow, you can calculate the total number of Joules by
> multiplying the Power[Watts]*Time[seconds] = Energy[Joules]
> -----------------------
> tutorial on supercaps;
>
> http://www.mpoweruk.com/supercaps.htm
> -----------------------
> here is another company who offers technical support and advice for
> your
> application;
>
> http://www.magnewin.com/
>
> and another supplier, there are many more...most of who will be glad
> to
> suggest ways to resolve your problem;
>
> http://www.ga-esi.com/EP/capacitors/index.php
>
> good luck!
>
> ---
> ========================================================
> from Jerry Decker @ http://www.keelynet.com
> Hope through Science and Invention
> Order out of Chaos - From an Art to a Science
> Donations : http://www.keelynet.com/donate1.htm
> Books/Videos : http://www.keelynet.com/products.htm
> MexiStim Energy Stimulator
> http://www.keelynet.com/mexistim/nexcrock.htm
> Vanguard Sciences (eBooks and DVDs)
> http://www.vanguardsciences.biz
> ========================================================
>


[Non-text portions of this message have been removed]

Hola Folks!

If NOTHING ELSE, WATCH THE TOP VIDEO!!!

It's too much for an email but check out the top entry at

http://www.keelynet.com/#whatsnew

04/27/10 - Incredible! - Yildriz Free Energy Magnetic Motor

I tracked down the patent last night and you can download the whole
2.5mb patent in pdf but I think its in danish.

Check out the two videos which includes the demo at Delft University
where they run the thing, take it apart, examine the parts, put it back
together and run it again..NO WIRES...amazine!

Maybe this is it???

Nos vemos (seeya!)

--
========================================================
         from Jerry Decker @ http://www.keelynet.com
             Hope through Science and Invention
        Order out of Chaos - From an Art to a Science
      Donations : http://www.keelynet.com/donate1.htm
    Books/Videos : http://www.keelynet.com/products.htm
                 MexiStim Energy Stimulator
       http://www.keelynet.com/mexistim/nexcrock.htm
             Vanguard Sciences (eBooks and DVDs)
                http://www.vanguardsciences.biz
========================================================

Hola Folks!

Is it possible that there could be hidden custom designed & shaped
batteries in this new Yildriz Magnetic Motor?

But the video shows they took it apart to examine each piece?

Sure seemed to have a lot of force when it was running.

I'd recommend downloading the 2.5 mb patent, it takes you to their page
with internal pdf viewer and in the upper left of the viewer, you see
'save full document' at;

http://v3.espacenet.com/publicationDetails/originalDocument?FT=D&date=20090430&D\
B=EPODOC&locale=en_EP&CC=WO&NR=2009019001A3&KC=A3

Let's hope this is for real and IF SO, doesn't get bought out or
snuffed...the videos say they showed it in Germany and in Holland but it
needs 60 minutes type exposure and more!!!

--
========================================================
         from Jerry Decker @ http://www.keelynet.com
             Hope through Science and Invention
        Order out of Chaos - From an Art to a Science
      Donations : http://www.keelynet.com/donate1.htm
    Books/Videos : http://www.keelynet.com/products.htm
                 MexiStim Energy Stimulator
       http://www.keelynet.com/mexistim/nexcrock.htm
             Vanguard Sciences (eBooks and DVDs)
                http://www.vanguardsciences.biz
========================================================

Hola Folks!

Sent three emails to 60 Minutes and their Evening News and 48 hour crews
about this maybe they will travel over and do a more detailed piece on
it in english??

What if a bunch of us write them...more demand means it is news of
interest so they might actually divert from the usual crap to something
interesting and possibly paradigm changing! Here is their contact link;

http://www.cbsnews.com/htdocs/feedback/fb_news_form.shtml?tag=ftr

Under message type, be sure to click 'suggestion'...in the message area
I directed them to keelynet to read the text and watch the videos...we
need this in english!  This is what I sent them;

http://www.keelynet.com/#whatsnew

04/27/10 - Incredible! - Yildriz Free Energy Magnetic Motor

I tracked down the patent last night and you can download the whole
2.5mb patent in pdf but I think its in danish.

Check out the two videos which includes the demo at Delft University
where they run the thing, take it apart, examine the parts, put it back
together and run it again..NO WIRES...amazing!

--
========================================================
         from Jerry Decker @ http://www.keelynet.com
             Hope through Science and Invention
        Order out of Chaos - From an Art to a Science
      Donations : http://www.keelynet.com/donate1.htm
    Books/Videos : http://www.keelynet.com/products.htm
                 MexiStim Energy Stimulator
       http://www.keelynet.com/mexistim/nexcrock.htm
             Vanguard Sciences (eBooks and DVDs)
                http://www.vanguardsciences.biz
========================================================

It is in German, not Danish.

--- On Tue, 4/27/10, Jerry Decker <jdecker@...> wrote:

From: Jerry Decker <jdecker@...>
Subject: [KeelyNet_Interact] tipping off US news about this new magnetic motor
To: "Interact" <KeelyNet_Interact@yahoogroups.com>
Date: Tuesday, April 27, 2010, 2:33 PM







 









       Hola Folks!



Sent three emails to 60 Minutes and their Evening News and 48 hour crews

about this maybe they will travel over and do a more detailed piece on

it in english??



What if a bunch of us write them...more demand means it is news of

interest so they might actually divert from the usual crap to something

interesting and possibly paradigm changing! Here is their contact link;



http://www.cbsnews. com/htdocs/ feedback/ fb_news_form. shtml?tag= ftr



Under message type, be sure to click 'suggestion' ...in the message area

I directed them to keelynet to read the text and watch the videos...we

need this in english!  This is what I sent them;



http://www.keelynet .com/#whatsnew



04/27/10 - Incredible! - Yildriz Free Energy Magnetic Motor



I tracked down the patent last night and you can download the whole

2.5mb patent in pdf but I think its in danish.



Check out the two videos which includes the demo at Delft University

where they run the thing, take it apart, examine the parts, put it back

together and run it again..NO WIRES...amazing!



--

============ ========= ========= ========= ========= ========

         from Jerry Decker @ http://www.keelynet .com

             Hope through Science and Invention

        Order out of Chaos - From an Art to a Science

      Donations : http://www.keelynet .com/donate1. htm

    Books/Videos : http://www.keelynet .com/products. htm

                 MexiStim Energy Stimulator

       http://www.keelynet .com/mexistim/ nexcrock. htm

             Vanguard Sciences (eBooks and DVDs)

                http://www.vanguard sciences. biz

============ ========= ========= ========= ========= ========























[Non-text portions of this message have been removed]

Hola George et al!

Thanks, corrected. Now if someone would translate the patent into
english, that would be nice...I'd most certainly post it for
study....if...it...was....available in english...


george tzindaro wrote:
>
>
> It is in German, not Danish.
>
> --- On Tue, 4/27/10, Jerry Decker <jdecker@...
> <mailto:jdecker%40keelynet.com>> wrote:
>
> From: Jerry Decker <jdecker@...
> <mailto:jdecker%40keelynet.com>> Subject: [KeelyNet_Interact] tipping
> off US news about this new magnetic motor To: "Interact"
> <KeelyNet_Interact@yahoogroups.com
> <mailto:KeelyNet_Interact%40yahoogroups.com>> Date: Tuesday, April
> 27, 2010, 2:33 PM
>
>
>
> Hola Folks!
>
> Sent three emails to 60 Minutes and their Evening News and 48 hour
> crews
>
> about this maybe they will travel over and do a more detailed piece
> on
>
> it in english??
>
> What if a bunch of us write them...more demand means it is news of
>
> interest so they might actually divert from the usual crap to
> something
>
> interesting and possibly paradigm changing! Here is their contact
> link;
>
> http://www.cbsnews. com/htdocs/ feedback/ fb_news_form. shtml?tag=
> ftr
>
> Under message type, be sure to click 'suggestion' ...in the message
> area
>
> I directed them to keelynet to read the text and watch the
> videos...we
>
> need this in english! This is what I sent them;
>
> http://www.keelynet .com/#whatsnew
>
> 04/27/10 - Incredible! - Yildriz Free Energy Magnetic Motor
>
> I tracked down the patent last night and you can download the whole
>
> 2.5mb patent in pdf but I think its in danish.
>
> Check out the two videos which includes the demo at Delft University
>
> where they run the thing, take it apart, examine the parts, put it
> back
>
> together and run it again..NO WIRES...amazing!
>

--
========================================================
         from Jerry Decker @ http://www.keelynet.com
             Hope through Science and Invention
        Order out of Chaos - From an Art to a Science
      Donations : http://www.keelynet.com/donate1.htm
    Books/Videos : http://www.keelynet.com/products.htm
                 MexiStim Energy Stimulator
       http://www.keelynet.com/mexistim/nexcrock.htm
             Vanguard Sciences (eBooks and DVDs)
                http://www.vanguardsciences.biz
========================================================

On Tue, Apr 27, 2010 at 2:25 PM, Jerry Decker <jdecker@...> wrote:

>
>
> Is it possible that there could be hidden custom designed & shaped
> batteries in this new Yildriz Magnetic Motor?
>
> Let's hope this is for real and IF SO, doesn't get bought out or
> snuffed...the videos say they showed it in Germany and in Holland but it
>  needs 60 minutes type exposure and more!!!
>

To me it looks like a rip off of Bill Muller's PRAN Technology from 1984.
See  section 11 of "The Manual of Free Energy Devices and Systems" compiled
by D.A. Keely, published by W.M.Moore in 1986,
the one with the pink cover.

If you want to build a toy one get some magnets, you need 32, and a Lazy
Susan.
Along the outside place 16 magnets that are twice as long as the 16 magnets
placed on the rotating inside ring.
The outside ring center-to-center spacing is 24-degrees.  The inside wring
center-to-center spacing is 22.5-degrees.

While you might get it to rotate it will have limited torque.

See also U.S Patent #4,179,633 Dec. 1979
"Magnetic wheel drive"
http://v3.espacenet.com/publicationDetails/biblio?DB=EPODOC&adjacent=true&locale\
=en_EP&FT=D&date=19791218&CC=US&NR=4179633A&KC=A


Don't forget that "Permanent Magnets" had a lot of energy pumped into them
to make them, will that energy stay in there forever...



--
http://www.wearablesmartsensors.com/
http://www.softwaresafety.net/
http://www.designer-iii.com/
http://www.unusualresearch.com/


[Non-text portions of this message have been removed]

hidden capacitors more like.. each section is isolated and insulated
from the rest so beware!
>
> On Tue, Apr 27, 2010 at 2:25 PM, Jerry Decker <jdecker@...
> <mailto:jdecker%40keelynet.com>> wrote:
>
> >
> >
> > Is it possible that there could be hidden custom designed & shaped
> > batteries in this new Yildriz Magnetic Motor?
> >
> > Let's hope this is for real and IF SO, doesn't get bought out or
> > snuffed...the videos say they showed it in Germany and in Holland but it
> > needs 60 minutes type exposure and more!!!
> >
>
> To me it looks like a rip off of Bill Muller's PRAN Technology from 1984.
> See section 11 of "The Manual of Free Energy Devices and Systems" compiled
> by D.A. Keely, published by W.M.Moore in 1986,
> the one with the pink cover.
>
> If you want to build a toy one get some magnets, you need 32, and a Lazy
> Susan.
> Along the outside place 16 magnets that are twice as long as the 16
> magnets
> placed on the rotating inside ring.
> The outside ring center-to-center spacing is 24-degrees. The inside wring
> center-to-center spacing is 22.5-degrees.
>
> While you might get it to rotate it will have limited torque.
>
> See also U.S Patent #4,179,633 Dec. 1979
> "Magnetic wheel drive"
>
http://v3.espacenet.com/publicationDetails/biblio?DB=EPODOC&adjacent=true&locale\
=en_EP&FT=D&date=19791218&CC=US&NR=4179633A&KC=A
>
<http://v3.espacenet.com/publicationDetails/biblio?DB=EPODOC&adjacent=true&local\
e=en_EP&FT=D&date=19791218&CC=US&NR=4179633A&KC=A>
>
> Don't forget that "Permanent Magnets" had a lot of energy pumped into them
> to make them, will that energy stay in there forever..
>



[Non-text portions of this message have been removed]

You only see someone selling plans. Is it still that dangerous to go high
profile enough to sell some kits online ?
All these decades and you can't get a permanent magnet toy even.
Is there anything out there and, if there is, do you have to have a masters in
engineering with a metal shop in your house to build it ?