does any one have Window on a floppy and be nice enough to send me the file, my laptop only has a floppy so if any one has it or know a link where I could...
Hello, The F270 requires a special CPU card that came in the F150 thru F360 and the fastest CPU that was built into the card was 400mhz (F360)the most RAM you...
I have an IBM 600E which my brother gave me because it didn't work. I replaced the keyboard with one I bought on e-bay for $35.00. The computer was up and...
I sell about 5 600e and x's per week if you replace the opperating system witha fresh load of win2000 or winxp you will find those machines to be alot ...
I have not posted before, so please excuse any missteps. My wife has an old, no name brand, laptop, running a 633 MHz chip. For the past couple of months, it...
You have a bad memmory chip take out the mamory and yuo will find that it wont shut down any more the pop sound is just the speakers being powerd off ... ...
if its not a bad memory chip, make sure the processor is being cooled efficiently. it could be overheating or it could be just a bad processor. make sure the...
Hi all, I try to replace inverter for gateway 5300, but when I put it the new one, It's give me red color on the display and the picture seems like normal. The...
You have a defective backlight inside the panel. -- Ardell Faul Laptop Computer & Monitor Repair 10816 E. Mission Ave., Spokane, Wa. 99206-4822 509-891-5188 ...
Sure. I do it all the time. But it involves seperating the layers of the LCD panel so you can remove the old lamp, along one edge, usually the top or bottom,...
I try to connect the cable pink and white to inverter and the result is the light on with white color, so that's mean the backlight doesn't have a problem ...
I did open the panel, layer by layer and i found the layer with the cable white and pink it's that what you mean the backlight ? Anyway to test that backlight,...
Hi Ardell I find on a lot of panels you can just cut the plastic end away on both ends and desolder and slide the lamp out without resorting to seperating the...
Hm. Well, If the light is a nice white color, I am surprised. Every one I have done that was red colored was caused by the light itself not firing properly...
Hi rich, The lamp seems alright and I do the test by connected the lamp with inverter and run it the machine and light on (white), so what makes the sceen red...
Arrrrgrh! So mother-in-law snaps the dc feed on her Presario 2500, while awaiting a new plug to solder to the motherboard, I ran a temporary pigtail out of...
if you send me a photo of it i have it just need to know wich one ... ===== REGARDS MIKE __________________________________ Do you Yahoo!? Check out...
I have a Sony Vaio PCG FX 240. The problem I am having is that there is a problem with the power jack on the motherboard. It has a loose connection. I believe...
Yes you can repair this you can either resolder the connections on the board if that doesnt work you can order a new connevtor on ebay for 3.99 to 7.99 ...
there is a 2 part glue called "plastic fusion" it is rated at 4500 pounds per squar inch and is sold in home depot there are about 10 diferent versions ...
I have been using J B Weld to reinforce the plastic hinge area. Any auto shop will have it. The main drawback to it is that it only comes in one color...
Desknote ECS A535+, Athlon XP 1400+ After i upgrade my BIOS with update downloaded from ECS web, my CPU fan run faster, the speed is static. Before i update my...
This won't boot. I have formatted and copied the install files to drive C. When I do a clean install from the C prompt, all looks normal until; the first...
gday, try safe mode? if ok it may be something loading in normal mode, or trying to load that causes the problem, it looks like the virtual memory manager,vxd ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
