Is there any way to tell the master DM1624 to change the preset number on a slave DM1624 when a programmable input is used on the master to select the active...
Yes. One way would be to connect from logic outputs on the master to logic inputs on the slave. You'll need an input/output pair for each preset. Program...
Sorry, I didn't mean to mislead but what I said in my previous response about the logic going "high" can be confusing. I meant that set the output logic pins...
Howard, Ahhh....thank you. We had intended to connect LEDs to the Programmable outputs to let us know which preset was current. From what you are saying, I...
Yes! That is exactly what I was describing - minus the LED, which I didn't know you were looking for. But it should work as you understand it. Regards, ...
Hi all, my name is JR Tyler, I work for DCI Sound in upstate NY. Looking forward to sharing ideas and learning along the way. JR...
JR Tyler
jrtyler@...
Nov 20, 2007 6:33 pm
21
Hi JR, Just a quick welcome to the list. There isn't always a lot of activity here, but if you have any comments or questions we are happy to answer! Regards,...
Hello, I have a question concerning the back panel controls on a DM1624. Is this the right place to ask it? bob ________________________________ From:...
Thanks. I want to control one of the input channels on our DM1624 with an external pot. I found some instructions for a DM84 which I hope will suffice. But,...
Hi Bob, Sorry but your thinking is not correct here. The way the rear panel controls work is that they are attenuate (cut) only. They minimuam attenuation is...
Howard, I've got to leave right now, but, how about if I swap the ground and +5 connections to the pot. Then set the mike gain to just below the feedback...
Well, that would reverse the action of the pot, but it would work opposite of what you intend - full clockwise would be maximum attenuation. So I wouldn't do...
I've just taken over the maintenance and operations of our Church sound system. We have a LecNet 2 digital mixer. Is there a help location that will explain...
Hi Mark, I think the best way to proceed might be with a one-on-one phone conversation. If you like I can call you, or feel free to give me a call at: (516)...
Hello. What's up? bob ________________________________ From: LecNet2@yahoogroups.com [mailto:LecNet2@yahoogroups.com] On Behalf Of bill.heinlein Sent: Sunday,...
Hi, group. My name is Judith, and I work for a systems integrator in Washington state. I'm specifying some equipment for a council chambers, and they ...
You can conference with more than one person using a phone bridge. There are bridging services and some businesses and government facilities have them as part...
Thanks. I knew there were videoconference bridges, but I didn't know about phone bridges. I'll see if they have one. Otherwise I'll look into services. I...
... If you arrange for more than one POTS (that stands for "Plain Old Telephone Service) line at the rack you can use several TH4's - one for each line. That...
I have just purchased a couple of LM transmitters (now a discontinued product). These transmitters have swivel battery doors. The Lectro 9V phantom power...
You can use an external DC power source for the LM and LMa transmitters, as long as you are careful to avoid a ground loop between the audio and power...
The LM and its replacement, the LMa, can be powered from an external DC source as long as you are careful about ground loops between the power supply and audio...
Hello, Is anyone know that, does Lectrosonics DM support Wildcard command in a macro? <?xml version="1.0" encoding="UTF-8"?> <macro device="DM1624"> ...
There was a lot of discussion at the NAB show in the last day or two regarding the second audio channel in the camera slot. It appears that Sony is under a...
thanks for getting back to me...i have the panasonic HDX900, do you know if they or you guys are working on a more graceful solution for that camera? bm Brian...
I'm looking for ideas for handling sources like wrls mics, which need to be routed to ONE room only (at a time) in a combining system. If rooms get combined...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
