Happy New Year Lectro Thanks for the info Bruce. I understand trying to keep it simple. I love your products. Just giving user feedback, I am thinking if it...
Hi Scott. Thanks again for the feedback. I received your message at my personal address weeks ago and sent a reply to you. Will resend off list. Best regards,...
Hi Folks! I have two Lectro 195D units, with Tram TR 50 microphones. I have to keep the transmitter attenuator pot almost closed in order to get the right...
the limiter led light around -10 db before limiting , put the tram around 10 o clock , the +20 led have to blink from time to rime the input level is around...
Do the 195D receivers have the attenuation switch inside the battery compartment? Can't remember, but if they do, there's your pad. Stacy Brownrigg ... around ...
Stacy , they have mic , low line, + 4db fix switch inside the battery compartment ( and the pilot tone by pass), but as I understood Tony have problem with...
the led comes much earlier then 10db befor the limitting happen if ir works like 200 b thats from Bruce few years ago The only difference in the B and C...
I think the problem is in the TX, that is to hot a level into the TX (improper wiring?? TX problem??) so the input to the TX has to be turned to almost "off"...
Senator Mike Michaels
Senator@...
Jan 7, 2006 10:59 pm
768
Hi Could anyone give me any info on when I might be able to purchase the Venue System/SM Tx's here in the UK, is anyone using them in Europe at this time?, any...
Anyone have success using an Extron CTL208cm to change macros of a Dm1612 via rs232? Would like to hear experiences, maximum cabling lengths used, baud rate...
... We'll look into that (may be buried on an obscure page) - but FYI, the color code is the same for the resistor color code - all our blocks are in the 20...
... I was delighted when i read it at first, but our European GSM network, or some other phone network is on that frequency :-( This frequency is still free in...
Hi Brian. Euro approvals for the new models including the Venue receiver are on hold at the moment pending the outcome of our request for an exemption to the...
... We have one installer who uses them all the time - they mainly activate macros only, using the "run(n)" where n is the macro number. They build all the...
Gordon Moore
gordon@...
Jan 9, 2006 9:18 pm
780
A bit more info on the topic from one of our senior salespeople, John ... series mixers through the RS232 port. The DM RS232 port can be set through the GUI to...
It's probably a mic wiring issue. The most compatible wiring is shown on the web site at: http://www.lectrosonics.com/hybrid/sm/smwiring.pdf Look at the...
Hi Scott, and Roberto. There is an 8 MHz band around 944 MHz in the US that is a Part 74 allocation for broadcast and motion picture production. The approvals...
Hi Scott. Right now we do not have any models deliverable on the 944 MHz band. Some FCC testing was done here and there, but nothing has gone into production...
I know the two location audio guys, Byron Smith and Rich Pooler, A-list doco guys here in Chicago. I can pass the word along. I was going to call anyway to let...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
