In future posts to this one it was suggested that a switch blade antenna would work for transmitting (IFB Block 26). This seems like the best thing for me. I...
Hi Stacy. If you stack the antennas so that they are in each other's null, there is much less chance of generating interference or desensing. Look at the...
There should not be any operational issues. If you have frequency adjustable units, just scan across the tuning range and find clear frequencies. As you can...
Hi Group. I am sure this question has been asked, but I don't remember the answer. I am thinking of updating my wireless mics. So now it's the digital age....
If you are mixing 400 series and 200 or below set your 400 to work in 200 or below mode and you wont notice anything. the only real time you may have a problem...
So... In the 200 mode, Is that down coverting in a digital mode or turning off the digital and transmitting in pure analog carrier like the 200's? ... ...
(we should probably change the title of this thread) The DSP in the hybrid transmitters delivers analog audio to the output stage for transmission just like an...
Bruce, That was just what I needed. I understand like a hammer on the head. I can start to make the move without worries. I thought the subject line was...
Does anyone know the price difference and when the 450 will be out? I have 2 UCR401s and am wondering if I should hold out for the 450 or see if i can buy a...
My VistaPrint Electronic Business Cardfrom Broadcast Engineering: Unlicensed device bills threaten wireless mics Bills under consideration in the House and...
Senator Mike Michaels
Senator@...
Apr 30, 2006 6:04 pm
896
The 250 mW UM450 is still in engineering. Not sure when it might appear. As for the price difference - probably a couple hundred more than the 100 mW UM400 -...
... From: "Senator Mike Michaels" <Senator@...> To: <Lectro@yahoogroups.com> Sent: Sunday, April 30, 2006 2:03 PM Subject: [Lectro] more...
H. Cohen
henryc@...
May 1, 2006 4:05 pm
898
I've made it through the Lectro seminar at LSC. Thanks for that BTW. I found it interesting concerning the 9V battery QC. Any thought on engineering the new UM...
AA batteries are certainly the trend at present. The new Energizer 15 min. NiMH rechargeables have been very reliable and so far seem to meet their published...
probably better then the alkalines they are about 3.6-4w capacity so I guess 2.5 hours of working time . ,what might be concern is that the lithium ions live...
What would be involved in changing a Block 22 R1A IFB receiver from Block 22 to Block 27? Is it prohibitively expensive? Foolish? Or not that big a deal? ...
send yours to eBay and look for the new one :-) if it like the regular receivers it almost impossible since you will have to change completely the boards ...
David: Yes, changing from one block to another is prohibitvely expensive. Sincerely, John Muldrow To: Lectro@yahoogroups.com From:...
John Muldrow
john@...
May 4, 2006 4:44 pm
905
rebuilding it from scratch!! Senator Mike Michaels, c.a.s. Studio M Productions Senator@... Sound for Film, Video, Radio, TV and PA ... From:...
Senator Mike Michaels
Senator@...
May 4, 2006 4:54 pm
906
Hi David. As Oleg mentioned, the cost of changing blocks is essentially the same as a new receiver, because the only things we can use is the belt clip and a...
Thank you all for your replies. I thought that might be the case. In fact, I don't own this unit; I just came upon one on E-bay and explored the possibility of...
Should I consider buying a used 185/187 Lectro, as against a new Sennheiser ew100? (I'm thinking of the advantage of many frequencies to choose from in an...
If you want to buy used... try a lectro 100 or a 201. If price is the reason, this might be the wrong site to compare brands. Good luck. bk ... [Non-text...
consider a Lectro U-100 series!! or a used 200 series however I'm still using 185/187 series stuff with continuing excellent results ...and remember this is...
Senator Mike Michaels
Senator@...
May 6, 2006 3:11 pm
912
Hi all. I'm a new member, long time Lectrosonics user. I recently just found out about this forum when I was doing some research into what was happening with...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
