The 250 mW UM450 is still in engineering. Not sure when it might appear. As for the price difference - probably a couple hundred more than the 100 mW UM400 -...
... From: "Senator Mike Michaels" <Senator@...> To: <Lectro@yahoogroups.com> Sent: Sunday, April 30, 2006 2:03 PM Subject: [Lectro] more...
H. Cohen
henryc@...
May 1, 2006 4:05 pm
898
I've made it through the Lectro seminar at LSC. Thanks for that BTW. I found it interesting concerning the 9V battery QC. Any thought on engineering the new UM...
AA batteries are certainly the trend at present. The new Energizer 15 min. NiMH rechargeables have been very reliable and so far seem to meet their published...
probably better then the alkalines they are about 3.6-4w capacity so I guess 2.5 hours of working time . ,what might be concern is that the lithium ions live...
What would be involved in changing a Block 22 R1A IFB receiver from Block 22 to Block 27? Is it prohibitively expensive? Foolish? Or not that big a deal? ...
send yours to eBay and look for the new one :-) if it like the regular receivers it almost impossible since you will have to change completely the boards ...
David: Yes, changing from one block to another is prohibitvely expensive. Sincerely, John Muldrow To: Lectro@yahoogroups.com From:...
John Muldrow
john@...
May 4, 2006 4:44 pm
905
rebuilding it from scratch!! Senator Mike Michaels, c.a.s. Studio M Productions Senator@... Sound for Film, Video, Radio, TV and PA ... From:...
Senator Mike Michaels
Senator@...
May 4, 2006 4:54 pm
906
Hi David. As Oleg mentioned, the cost of changing blocks is essentially the same as a new receiver, because the only things we can use is the belt clip and a...
Thank you all for your replies. I thought that might be the case. In fact, I don't own this unit; I just came upon one on E-bay and explored the possibility of...
Should I consider buying a used 185/187 Lectro, as against a new Sennheiser ew100? (I'm thinking of the advantage of many frequencies to choose from in an...
If you want to buy used... try a lectro 100 or a 201. If price is the reason, this might be the wrong site to compare brands. Good luck. bk ... [Non-text...
consider a Lectro U-100 series!! or a used 200 series however I'm still using 185/187 series stuff with continuing excellent results ...and remember this is...
Senator Mike Michaels
Senator@...
May 6, 2006 3:11 pm
912
Hi all. I'm a new member, long time Lectrosonics user. I recently just found out about this forum when I was doing some research into what was happening with...
HI Mike. Welcome to the group! The purpose of this group is to exchange technical information, applications and experiences Lectrosonics products. As such, we...
actually this is a question for mr Fisher from Lectrosonics: My dealer Mattijsen told me that Lectrosonics doesn't have a 'leadfree'factory so what are the...
how much the transmitter puling in sleep mod and is it possible make it power on with lets say signal grater then -40 dbm from the mixer since there is no...
Hi Mark. Welcome to the group. There are lots of location sound people in this group. This group is monitored and moderated in an effort to keep it focused...
The SMD is a dual battery version of the SM. Another battery on the opposite side makes it wider, but the same thickness. Twice the operating time at 100 mW...
The fact is that we would love to continue shipping products into Europe, but the European Commission is blocking us from doing so after the end of June....
Hi Oleg. The SM transmitters drop to 20% power consumption in the sleep mode. A lot of things are possible with firmware, but we try not to go too crazy with...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
