Still no progress. Here's what I've tried. First I rebooted in EM Mode (or tried to), as suggested by Art(holding the reset button during power up). That...
I think I finally figured it out. My Linkstation is running normally now, everything seems to be back in shape. Since I knew that the overlay presented here: ...
I followed the same instructions to change the path and recompiled. But when I ran "/etc/init.d/murasaki start" I got an error: root@KURO_FS250:/etc/init.d#...
I bought a linkstation HD-LAN120 last year and it sat in the box gathering dust for a while. I tried setting it up in August. It came with firmware ver 1.3....
For your model of LinkStation you must use the 1.xx series of firmware - the 2.xx series is for the models with different internal hardware. You say that you...
Yes I tried that. I changed the IP address of my computer to 192.168.11.2, then I can ping the Linkstation at 192.168.11.150 but then the firmware update...
Theres a switch on the back of your LS (if it's the ppc version), try switching it to the other setting. I just tried with my LS - switching it to the wrong...
On my kurobox, i do have a file called /lib/modules/2.4.17_mvl21/modules.dep ! Do you use your original murasaki script, or the one from my kurobox ? (it may...
It is not necessary to connect the linkstation directly to the pc, I always did updates through the router, although it is a good idea if you suspect it might...
... Not bat at all! Gentoo is not a Linux distro for newbies. It is very good in the long run however, as long as you don't mind the lengthy emerge/compile...
OK so I tried setting the crossover switch the wrong way ( the green light --Link/ Act goes out) Then I was unable to ping the LS, I was unable to bring up...
So, is it listed in your workgroup? (you using windows?) You say your router "gives" it an IP address? Meaning it is using DHCP, but when you plugged directly...
Hi, There was some discussion on the usage of Subversion recently.... has anybody managed to get it working OK, and if so, how would I go about doing so? FWIW,...
After you check all the things gouldyis suggests, if it still doesn't work and the problem is a wrong ip you can try disabling the dhcp on the linkstation. I...
Hi Dana, OK, I'll try and point you to as many things as I can – did you also try the other suggestion of disabling XP firewall as this is known to effect...
Hi, just wanted to add that I'm really interrested in this feature as well What exactly is the problem running it? If I issue "echo -n '\\\\' >/dev/ttyS0" the...
Hi everyone, I tried upgrading my 1.44 firmware to 1.47. It finishes the "Settings are being saved" stage. Then it goes through the "Firmware is transmitting"...
Hello all. This is actually a little off topic, but hopefully someone can help. I have a LS2 with the telnet enabled firmware installed, and have installed...
I have not seen anybody tell you to disable the WinBlows firewall. Or any other firewall for that matter. WinBlows firewall does block most PC connections....
Hello all. This is actually a little off topic, but hopefully someone can help. I have a LS2 with the telnet enabled firmware installed, and have installed...
I would rather say that the problem is in your network. does you LS have a dhcp or static IP? Check your default gateway settings on the LS and router...
Take a look to see if you have a /etc/hosts.deny and /etc/hosts.allow. If so they may need to be updated. ... From: "Nick Pappas" <nwpappas@...> To:...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
