Still no progress. Here's what I've tried. First I rebooted in EM Mode (or tried to), as suggested by Art(holding the reset button during power up). That...
4105
eykamp
Oct 1, 2005 4:08 pm
I think I finally figured it out. My Linkstation is running normally now, everything seems to be back in shape. Since I knew that the overlay presented here: ...
4106
schwab_one
Oct 1, 2005 4:46 pm
The www.linkstationwiki.org website has recently been offline. Anyone know the news as to when it will be online and available again?...
4107
JohnDBranfoot@...
johndbranfoot
Oct 1, 2005 5:37 pm
4108
johnnykwc
Oct 1, 2005 6:05 pm
I followed the same instructions to change the path and recompiled. But when I ran "/etc/init.d/murasaki start" I got an error: root@KURO_FS250:/etc/init.d#...
4109
wedgemusic
Oct 1, 2005 6:12 pm
Our web host is experiencing some technical difficulties. See http://forum.powweb.com/showthread.php?p=334616#post334616 for more information....
4110
Art Wallace
artwallacex
Oct 1, 2005 8:25 pm
How long did you hold the red and power down buttons for? Art Wallace art@... ... From: LinkStation_General@yahoogroups.com ...
4111
schwab_one
Oct 1, 2005 9:28 pm
The LinkstationWiki is back up and running as of Saturday afternoon...
4112
fullermd2002
Oct 1, 2005 10:29 pm
I bought a linkstation HD-LAN120 last year and it sat in the box gathering dust for a while. I tried setting it up in August. It came with firmware ver 1.3....
4113
itimpi50
Oct 2, 2005 11:32 am
For your model of LinkStation you must use the 1.xx series of firmware - the 2.xx series is for the models with different internal hardware. You say that you...
4114
fullermd2002
Oct 2, 2005 8:03 pm
Yes I tried that. I changed the IP address of my computer to 192.168.11.2, then I can ping the Linkstation at 192.168.11.150 but then the firmware update...
4115
gouldyis
Oct 2, 2005 8:25 pm
Theres a switch on the back of your LS (if it's the ppc version), try switching it to the other setting. I just tried with my LS - switching it to the wrong...
4116
snatcher93
Oct 2, 2005 9:30 pm
On my kurobox, i do have a file called /lib/modules/2.4.17_mvl21/modules.dep ! Do you use your original murasaki script, or the one from my kurobox ? (it may...
4117
shamael_2097
Oct 2, 2005 10:00 pm
It is not necessary to connect the linkstation directly to the pc, I always did updates through the router, although it is a good idea if you suspect it might...
4118
James Stewart
wartstew
Oct 2, 2005 11:22 pm
... Not bat at all! Gentoo is not a Linux distro for newbies. It is very good in the long run however, as long as you don't mind the lengthy emerge/compile...
4119
fullermd2002
Oct 3, 2005 3:15 am
OK so I tried setting the crossover switch the wrong way ( the green light --Link/ Act goes out) Then I was unable to ping the LS, I was unable to bring up...
4120
gouldyis
Oct 3, 2005 9:59 am
So, is it listed in your workgroup? (you using windows?) You say your router "gives" it an IP address? Meaning it is using DHCP, but when you plugged directly...
4121
Mil
milanhawkins
Oct 3, 2005 12:45 pm
Hi, There was some discussion on the usage of Subversion recently.... has anybody managed to get it working OK, and if so, how would I go about doing so? FWIW,...
4122
wedgemusic
Oct 3, 2005 1:52 pm
I've successfully installed Subversion on my LinkStation. However, the program was very, very slow....
4123
shamael_2097
Oct 3, 2005 2:00 pm
After you check all the things gouldyis suggests, if it still doesn't work and the problem is a wrong ip you can try disabling the dhcp on the linkstation. I...
4124
Mil
milanhawkins
Oct 3, 2005 3:17 pm
... Thanks for the feedback - I guess I won't bother installing it then!...
4125
James Ronald
james_j_ronald
Oct 3, 2005 6:40 pm
Dana, You did turn off the Windows firewall and shutdown zone alarm or any such software that you may be using right. JR ... From: "fullermd2002"...
4126
gouldyis
Oct 5, 2005 11:08 am
Hi Dana, OK, I'll try and point you to as many things as I can – did you also try the other suggestion of disabling XP firewall as this is known to effect...
4127
samerbaer
Oct 5, 2005 1:54 pm
Hi, just wanted to add that I'm really interrested in this feature as well What exactly is the problem running it? If I issue "echo -n '\\\\' >/dev/ttyS0"; the...
4128
noelsawarchive
Oct 6, 2005 5:34 am
Hi everyone, I tried upgrading my 1.44 firmware to 1.47. It finishes the "Settings are being saved" stage. Then it goes through the "Firmware is transmitting"...
4129
Nick Pappas
pappasnw
Oct 7, 2005 2:33 am
Hello all. This is actually a little off topic, but hopefully someone can help. I have a LS2 with the telnet enabled firmware installed, and have installed...
4130
irvine_stock
Oct 7, 2005 4:46 am
I have not seen anybody tell you to disable the WinBlows firewall. Or any other firewall for that matter. WinBlows firewall does block most PC connections....
4131
Nick Pappas
pappasnw
Oct 7, 2005 5:33 am
Hello all. This is actually a little off topic, but hopefully someone can help. I have a LS2 with the telnet enabled firmware installed, and have installed...
4132
yanfrikin
Oct 7, 2005 1:12 pm
I would rather say that the problem is in your network. does you LS have a dhcp or static IP? Check your default gateway settings on the LS and router...
4133
James Ronald
james_j_ronald
Oct 7, 2005 2:36 pm
Take a look to see if you have a /etc/hosts.deny and /etc/hosts.allow. If so they may need to be updated. ... From: "Nick Pappas" <nwpappas@...> To:...
