... Turns out that this statement is incorrect. The "usbdisk1"; share does not connect, but the LS share seems to be fine -- I can access the data normally. ...
... access ... i assume you are running a telnet enabled firmware (maybe openlink) please post the output of df ls -al /mnt2/ -> if you have a LS1 ls...
fans have moving parts. and they become old. thats the problem. you can swap the fan. there is a link in the FAQ section of our wiki at www.linkstationwiki.net...
... access ... This may be related to the linux kernel and ext2 file system versions that the Linkstation uses. It tends to get a tad shirty with files bigger...
Hi, I am totally new at this, but I upgraded my LS2 to use OpenLink the other day in hopes of getting my mac g4 laptop to be able to browse the linkstation...
... On OpenLink, you've got to compile netatalk yourself, as outlined in the article. You've got to install the dev-tools for your system first. ... Well,...
I have installed the dev-tools already, will have to try to compile netatalk then. Thanks. As for the user privileges, nothing is broken. I was just...
... Good luck! ... Basically every time I log in (via SSH only). Because I do it only when I want to change the configuration. If I just want to store files on...
Does anyone know how to disable/disconnect the Linkstation's fan and still have it boot properly? If there is no fan present, the Linkstation will flash the...
Assuming that the fan's tach signal is open collector and it operates off of 5 volts then figure 14 here http://www.national.com/pf/LM/LM555.html + a resistor...
a question..which LS-model do you have? if you have openlink/freelink installed on your box you could install avr_evtd instead of ppc_uartd. ppc_uartd is the...
I bought a secondhand HD-H120LAN, it worked fine ut in the end wasn't big enough, I tried to swap out the drives but as soon as did that it wouldn't connect,...
take a look here: http://linkstationwiki.net/index.php?title=Recover_a_non_working_% 22bricked%22_Linkstation If you wanted to use the stock firmware you could...
Thank you, mindbender & KeepIt SimpleStupid! I'll try the openlink/freelink firmware and avr_evtd solution, but first I've got to get a fan connected, as the...
OK thanks a lot, I am new to these Linkstations, I managed to get my 300gb drive to work OK using stock firmware. I never realised these things are basically...
Well, I know where it is, but it won't talk to me ;-) I have a LS running Gentoo 2.6 Everything was going great until I adjusted the routing tables with route,...
I am using openlink 2.23 on my Linkstation. I got help to install twonkymusic, and, although twonky has been running well, I don't seem to be able to use...
Ok i need some more help. I have installed the BerklyDB and I think I complied Netatalk, but i must have missed something. Or I just don't know how to run...
... Is it already running? ps auxw|grep afpd|grep -v grep If it is, and is already doing so after a reboot, configure netatalk as I suggested here: ...
Hello, I am appriciated joying this group,but I couldnt download mipsel-openlink-052b.I never connect the linkstationwiki.org or linkstationwiki.net.Could you...
FYI http://www.buffalo-technology.com/support/downloads.php There seems to be a new firmware version available. But I don't know if it's for the LS1 or LS 2...
... Never mind. I used the exploit from this thread to modify the /etc/shadow file: http://tech.groups.yahoo.com/group/LinkStation_General/message/1...
... That's good, netatalk is on. Try and see what version is running, which will also answer your question about the location of the configuration files: afpd...
... Sorry, cp&p wasn't precise enough: # afpd -version afpd 2.0.3 - Apple Filing Protocol (AFP) daemon of Netatalk This program is free software; you can...
