My linkstation has been working flawlessly for the 1st month of ownership but now it turns itself off every 2 - 4 days for no reason that I can see. I use it...
Hi, I've been lurking on this group for a while, but haven't done any of the mods suggested by this group (yet). My key issue is backing up to my Buffalo...
Fan and HD noise in my HD-H160LAN LS2 is annoying. Another LS owner checked it and told me that this is normal for LS2. Are there any other Linksation NAS...
The noise is also very annoying to me ... I was thinking about putting a resistor between the fan and the power source, to reduce the rotation ... anyone ever...
Wladston... Fan is required because of the way LS is built. It is there for a purpose. If you do anything that affect its performance, the bits inside will...
Hi, this is a request - anybody with an open ls-ppc or kurobox - could you, please, try to locate the rtc chip (rs5c372) on the board and look what model it is...
Thanks for the answers man! If you do anything that affect its performance, the bits ... Well, considering it has two modes, and considering we can monitor the...
Good idea! If you can modify it so that the fan can be thermostatically controlled, the LS will be noisy only some of the time. I have the Link-theater...
When LS is placed on a table, noise is at its worst. I placed it on a mousemat with high density foam backing and the drop in noise was very noticeable. Then I...
Bluemax, I was told that 42 ohm should slow the fan down for about 70%. And there are scripts that monitor the hdd temperature and can ask the fan to spin...
Dear Linkstation fiddlers, I am afraid that my experience with modern fast 3.5 inch drives is that they run noisy and hot. if you want to stick to 3.5 rives...
That's another problem ... I'm not a computer-case-designer .... :/ ... -- Wladston Viana Ferreira Filho Belo Horizonte - MG, Brasil Computer Science student...
I hope I don't get banned for saying this here but was adviced recetly that Qnap TS-101 is fanless and quite. But much more expensive. Has anyone tried...
Greetings, I bought a Linkstation HD-H300LAN last year for network sharing, however recently I would also appreciate an FTP function, if it can do it. The...
... This linkstation has a basic, unsecure FTP server built in with the stock firmware. There should be instructions in the manual for setting that up, but...
Hi all, While tooling around the menus in my KuroBox HG, and without thinking things through fully... I thought I'd try the Jumbo Frame setting, as both my KB...
This is a personal reply. since I'm not sure. ... Sean: From previous posts, it seems to be possible to connect via a crossover cable. If your computer has an ...
My reply. since I'm not sure of a few things not having a KB. Anybody can feel free to chime in, if I appear to innacurate. ... Sean: From previous posts, it...
... Dear Goat thank you very much for such a useful answer. I spent a whole morning just by reading the linstationwiki FAQ to find out more about my ...
Disregard the replay with "Personal" in the subject and use the updated response without "Personal" in the subject. Yahoo's "Reply to sender" seems to have...
... You have to configure your router to forward incoming FTP traffic (port 21) to the 192.168.x.x address of your Linkstation. You would then FTP to the...
... Thank you very much indeed. I found out there was an interference in ports that was fixed by an update of firmware and reseting of port forwarding rules....
... FTP passes passwords in cleartext. Therefore, it's not secure. The replacement for FTP and Telnet which both place passwords in the clear is SCP and SSH....
Hi I bought a Buffalo HS-D300GL-1 LinkStation Home Server 300GB from Amazon can I install openlink or freelink on this or is this the one that bricks? Cheers ...
... Hi Alan; The fine people who put together the linkstation wiki have written up what's covered & what's not for your model. And, btw, any mod we make could...
I bought a LaCie external HD with the same capacity as my LS2. Idea was to use it for backing up files that took me a long time to rip from CDs. But now find...
Is there a DynDns client that will run on a stock LS Pro? The Linux DynDns clients I've found all seem to require modules that the stock LS doesn't have...
... No it's not. There are ext2/ext3 file system drivers available for windows. Like: http://sourceforge.net/projects/ext2fsd Note: I haven't tried it myself,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
