Being a linkstation owner I'm somewhat biased but I think a linkstation is the best choice by far. A linksys slug is too expensive and under powered for it's...
Hi thanks for that but it does seem the slug is easy to flash. The asus comes with some features ready to use. The Linkstation seems the hardest to flash and...
I ran a backup from my linkstation 250 to the USB disk. Once the backup was complete, I enabled the USB disk as a shared folder, disabled the backup settings,...
Hello, I replaced the fan in LS1 (running Gentoo) and am experiencing a very vexing issue. When the machine is disassembled, it runs just fine, for days on...
... someone with a Linkstation Live ... and the rest on my NAS. I ... don't want to fuss with ... Just make your Pro to a Linkstation Live: update the...
... Can you specifically correlate the issue to heat? As in other parts of the system. If you put the device near an A/C or other very cool area, can you...
... Which model do you have, the HD-H model should work fine in that regard, depending on if you have the correct formatting. I would assume that due to the...
... Could the fan be installed so the airflow is in the wrong direction? ____________________________________________________________________________________ ...
... That depends on if you let the unit completely cool off before restarting it. With a quick restart, the unit is probably still at an elevated temperature...
Until today, neither of my two macs had any trouble mounting a share on my LS pro via afp. Suddenly today it doesn't work. The AFP Client in the mac just...
Hello all, I appears that during the install of debian, I lost share permissions or access from the outside. Is there anyone that can help me sort thru this -...
Thanks to everyone who has responded so far to my overheating problem. I say overheating because I am prepared to declare that is what the problem is. I again...
New to the group, but was hoping someone could point me in the right direction for some troubles I'm having. Long story short, I had a Linkstation that bricked...
6140
Andrew Hodgson
andrew@...
Aug 12, 2007 1:53 pm
Hi, If you can ping it through the router, have you tried putting the original firmware back on? I have had this trouble, and when the web config wasn't...
I have a Buffalo 120 with an attached USB 250GB disk. The 250GB disk is failing, and I wanted to try and access the drive from a LINUX (Ubuntu) PC or using...
... You need to use something called fixext2magic (more or less the right name). Post your question at the linkstationwiki.net site & use it for reference,...
... The easiest way is to boot the PC into a Linux "Live CD" (Knoppix, ...), and use one of the precompiled executables. -Andre...
6152
Andrew Hodgson
andrew@...
Aug 18, 2007 12:48 pm
Hi, I can see that in the stock firmware, there is a backup function which searches for other Linkstations. Does anyone know if this uses Rsync, and if it is...
I appreciate the response, but need to clarify that I have never modded my LinkStation in any way, whatsoever. The firmware is the stock firmware, and now that...
I scheduled an immediate backup from my buffalo linkstation live to my external usb and even though it finished it still says on the home pages that the backup...
... I've seen the same issue with my LSPro, if you don't have shell access the easiest way to fix the issue is to initialize the box. Go to maintenence ->...
... rsync itself, by default, has no ability to "search for other devices" so this would have to be an added in service. looking at my running processes, the...
Hello - I just bought a linkstation live and am trying to configure it to be access remotely through the web. It comes up and asked for a username and password...
Hello Graham - I tried the setup password. I can access the setup of the nas through the ip address with that user and password. I did not change them yet. ...
I came home from work today. turned on the LS thinking I had the old drive in it, (but the new one was in) and it came up first time! I installed openlink and...
I'm not sure if my earlier reply made it through or not. I think you are looking at the log in for users of the share. You set up users first through the set...
