Tried this utility a few times now. First thing that happens is that the mouse stop working. I proceed by using the mousepad on the notebook. Then this message...
... Maybe the 500 draws too much energy, or takes too long to spin up. I would delete all partitions from the HDD, run the firmware updater twice, and see if...
I just upgraded the firmware in my LinkStation Pro to 1.11. Now I've got no afp access and get an error code -5014 when I try. afp sees the linkstation but...
Hi everyone I have one of the HD-HLAN and I have all my media sitting there. I would like to buy a new Playstation3 and use it to stream my media. I know that...
Hi, I have just been through this exercise myself. I have a Kurobox running Gentoo with v2.6 kernel, I am not sure how you would go about doing this without a...
Cheers for the reply I am having a wee bit of trouble understanding here? Is the software you talking about for the PS3 or linkstation? To break it down I have...
If the Linkstation is running a media server like twonkyvision or Wizd the PS3 can playback most audio and most video depending on the format. I have a KuroHG...
Thanks for that, so what is the best recommendation for the server and is there a link what to do. Do I load the 'server' software on to the linkstation. I...
http://www.twonkyvision.com/Download/TwonkyMedia/TM4Technicians.html The above link goes to the download page for NAS devices including the LinkStation I am...
Sorry, for confusing you. Yes, as Gary says you should be using a media server to provide media to the PS3, it cant connected to a network share from the...
Hello, I just joined so this may have already been said, but you don't have to use the client utility on the CD. I have the linkstation (non-pro) HD-H250 and...
The old 250GB WD drive is failing in my LinkStation, the bearings are squealing, so I replaced it with a new drive of the same size and manufacture. I powered...
You could hook both the old and new drives up to one of your Linux boxes and use dd if=/dev/XXX of=/dev/XXX bs=XXXX ( Replacing XXXs with your specific devices...
Hi, If you can ping the box you are probably in the recovery mode and need to load the firmware on using the firmware updater. The system will try using DHCP...
Andrew Hodgson
andrew@...
Jan 1, 2008 2:42 pm
6308
Hi, Just bought a linkstation Pro (LS-GL) with a harddrive of 750GB (seagate barracuda). I put freelink on it, and i'm having problems to let my harddrive...
... I think, it is what you currently get now for most commands to SATA disks or even to (P)ATA disks handled by libata. I just don't remember what was the...
hello, i tried to upgrade the firmware in my LS Home server. it went almost fine until the end, but at the end there was a message that told me, that there was...
Good information which led me to the sdparm utility which is working Thanks again Bart ... problems to ... disks ... what was ... those. ... hdparm or...
Hi everyone, The Linkstation Pro finally offers great compatibility with Macs thanks to Netatalk 2.0.3 (speaking of which, does anyone have an updated URL to...
Speaking of compatibility with Macs - I'm having a terrible time connecting via AFP to two different Pro 500GLs from several different macs all running...
... What specifically is going wrong? How are you rebuilding the .AppleDB? Since the LS Pro runs the latest version of Netatalk (2.0.3), no upgrade is...
I tried to flash my Dd-H250LAN up to 1.47 but it returned a "failure" message and since then (obviously) I cannot access the drive at all... The Airnavi sees...
The Linkstations were originally designed to be part of a local area network (LAN) of computers to provide a shared source of file storage between them. Many...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
