I have an HD-HG250LAN which went belly up. I'm thinking it might have been an overheat issue and blew something. I came home one day and it was off. Every...
6671
ScottS
scotttravel2003
Mar 13, 2009 6:19 pm
Although not specifically related to the older LinkStations, Marvell has released an interesting product, the Sheeva-based Plug Computer, which has the...
6672
Joseph McLaughlin
jwm8351
Mar 14, 2009 12:32 am
1) I do not know what kind of hard drive you have - it could be an IDE with a 4 pin power and 40 pin cable. if so the yellow cable should be 12v to the black...
6673
robert440917
Mar 14, 2009 12:39 am
After a failed install of the addons pack, my shared folders menu looks like: HELP Shared Folders Setup Disk or Array Shared Folder Name Disk 1 mnt...
6674
scottgriz
Mar 14, 2009 11:10 pm
Hi Joe. Thanks for the reply. I am getting 11.63v from the orange wire. It's not yellow on mine. And 5.17v on the red wire. That is straight off the power...
6675
Joseph McLaughlin
jwm8351
Mar 14, 2009 11:51 pm
Two things - are you testing when the devices are connected? Do you have access to another power supply My first test would be to replace the power supply (I...
6676
scottgriz
Mar 15, 2009 2:56 am
No. I am testing the leads that would plug to the drive while disconnected. I have another enclosure I can throw the drive in. I don't think it's the drive. I...
6677
Joseph McLaughlin
jwm8351
Mar 15, 2009 4:18 am
You might try ---- AT your own risk powering the hard drive from your other case while still leaving it in your HG250LAN What wires come from the power supply?...
6678
Kevin Henderson
kev_henderson
Mar 18, 2009 10:11 pm
Hi I the above Linkstation with firmware 2.11 running sharing multimedia content with my PS3. I am using Tversity do do this and it works very well, but need...
6703
Pat Hall
pmfh2002
Apr 3, 2009 6:22 pm
I've had a drive crash and it needs to be replaced. Can anyone point me in the right direction? Searched the group, but found no results. Thanks!...
6704
Andrew Hodgson
andrew@...
Apr 5, 2009 5:52 pm
Hi, Have you got the drive in or did you need help with removing the old drive and fitting the new one? On the software side, when the new drive was installed...
6730
markus.marb
Apr 26, 2009 7:43 am
Hello, i want to install the 8USB extension on my Linkstation pro, but it seems i am to stupid to do. I downloaded the A-Version package, but if i want to...
6732
Paul Wright
tradedmanatee
May 5, 2009 11:47 am
Hi Markus In Windows the local directory is always checked for the command and then your path. In Linux the local directory is never checked only the path. In...
6762
Gerardo Gomez
gomitosg
May 20, 2009 4:11 am
Hi All, I have a Linkstation HD250. I cannot turn it on again, I am guessing that there was some power failure and it blew up the internal power supply. I...
6763
Paul Wright
tradedmanatee
May 23, 2009 11:08 am
Hi Geraldo, you're best option is probably to get a bootable linux disk, google should bring up half a dozen options. I tend to use the latest live version of...
6764
paul
emupaul
May 23, 2009 11:51 pm
... So far, so good. You might have better luck if you open your PC and slave the drive. Might have to tell BIOS there is a new drive. Oh, wait, you have a...
6771
william.plowman@...
william.plow...
Jun 4, 2009 12:48 am
I used Twonkyvision successfully on my Linkstation for several years. After having to rebuild my Linkstation following a drive failure I installed firefly...
6772
John Euinton
john131658
Jun 4, 2009 9:11 am
Hi William, I tried Twonky on my LS2 (Mips) and found it worked for several days but then would stop responding. I saw the same - netstat showing that the port...
6773
Darren
chubloodychu
Jun 8, 2009 5:53 am
Hello, I have a LS-CL 650 F/W 1.02 and have searched the wiki site for details of how to install OpenLink, but couldn't find any details. Could somebody...
6774
Winston Sun
winston.sun
Jun 16, 2009 9:25 pm
Hi, I need to copy all rsync related files to my IOMEGA 250G NAS. Could somebody with a PPC based linkstation LS do the following ldd rsync then attach rsync...
6775
grashnaknieswurz
grashnaknies...
Jul 30, 2009 12:44 am
Hi there, I just bought a network music player and wanted to install a media server on my Linkstation. As far as I know, it's the PPC one. For the installation...
6776
Brian Cowan
brcowan
Jul 30, 2009 3:17 am
As I recall, you can take advantage of the fact that the webroot directory is completely insecure on these things to execute arbitrary scripts. I copied...
6777
John Euinton
john131658
Jul 30, 2009 10:22 am
Hi Eric, There is lots of information on the different Linkstation models at http://www.linkstationwiki.net/index.php?title=Main_Page I have a a HD-HLAN1 v1...
6778
Andrew Hodgson
andrew@...
Aug 29, 2009 11:30 am
Hi, I see on the Buffalo website there are two different versions of the LS Pro - one old model which seems to have Firmware 1.15, which is the one I have, and...
6779
Christopher Eykamp
eykamp
Oct 6, 2009 4:15 am
I have an old PPC Linkstation that is somewhat broken... (search the archives for my name to see the nature of the problems). I am cleaning house, and am...
6780
Atif Jalal
atifjalal
Oct 6, 2009 3:20 pm
I am interested, please let me know if still available. ... From: Christopher Eykamp Sent: 10/6/2009 4:13:21 AM To: LinkStation_General@yahoogroups.com ...
6781
Gary Smith
gbcsuk
Oct 6, 2009 4:32 pm
I've just swapped out my 300gb drive for a 750gb drive. I've cloned my old drive on a PC via Acronis True Image. I've kept the small 200mb partitions the same...
6782
Andrew Hodgson
andrew@...
Oct 6, 2009 5:46 pm
Hi, Probably best to wipe the drive clean and let the firmware upgrade program create the partitions. Thanks. Andrew. From: LinkStation_General@yahoogroups.com...
6783
Gary Smith
gbcsuk
Oct 7, 2009 12:28 pm
Hi, I pulled the old drive and put in a new 750gb unit. When I power up the Linkstation Beeps a two tone beep for quite some time and the error light flashes 6...
6784
Andrew Hodgson
andrew@...
Oct 7, 2009 3:39 pm
Hi, Download the firmware upgrade pack for your Linkstation via the Buffalo website. Ensure you have DHCP enabled. When the Linkstation is connected, it...
