LinkStation_General : Messages : 6843-6873 of 6880

Faton,�

I don't know where you are in the world, but tigerdirect.com has WD Green 2TB drives for USD $99.�

Regards,

Tim

Reply | Messages in this Topic (5)

#6844

From: "sigfreund" <sigfreund@...>
Date: Sat Nov 6, 2010 12:23 pm
Subject: HS-DH500GL constant network activity?

sigfreund

I have a HS-DH500GL and because of constant network and drive activity rarely
leave it on.  Is this normal?  I worry that maybe it is being accessed or probed
from sources outsie my home network.  I don't understand what it is doing with
all of my computers in my network off yet it still shows network and hard drive
activity activity.  Is there any way to get it to sleep when it is not being
used?

#6845

From: paul <pt@...>
Date: Sat Nov 6, 2010 6:22 pm
Subject: Re: HS-DH500GL constant network activity?

emupaul

sigfreund said the following on 11/6/2010 7:23 AM:
> I have a HS-DH500GL and because of constant network and drive
> activity rarely leave it on.  Is this normal?  I worry that maybe it
> is being accessed or probed from sources outsie my home network.  I
> don't understand what it is doing with all of my computers in my
> network off yet it still shows network and hard drive activity
> activity.  Is there any way to get it to sleep when it is not being
> used?
>
>
>

Probed from outside your LAN?  You /do/ have a router and are not just
plugging the ISP feed into a hub?  Get thee to www.grc.com and use
ShieldsUP.  Once you are "stealth" the activity seen by your linksys is
from your LAN.


My linksys stays on a lot.  I think it is a combination of "when to
sleep" time and network activity.

Network activity.... when you map a drive letter to the linksys Windows
is going to ping it once in a while while your PC is in use.

When all the PC's go to sleep, the linksys does, too.

You can try un-mapping to the linksys... it should still appear in
Explorer in Network Places.  yeah, I'm still using XP.



paul
--
_____________________________________
     http://remsset.com


     Lensmen eat Jedi for breakfast.

#6846

From: Gary Smith <gary@...>
Date: Fri Nov 12, 2010 7:21 pm
Subject: Re: Link Station RAID

gbcsuk

I've a two drive RAID setup, and think one of the drives has dies :-(

Is there any way to recover the data from the other disk?

thanks

#6848

From: "euronote" <aastrid@...>
Date: Thu Jan 20, 2011 1:15 pm
Subject: Add slave "internal" IDE hard drive to Linkstation LS 2 (mips)?

euronote

Hi, has anyone successfully added a second internal hard drive to this NAS?
How, like this?
Changed to an IDE-ribbon with "slave connector"
Used the same, internal power supply as the original hdd?
Formatted the hdd to ext3, added to fstab:
/dev/hdb3 /mnt/extra ext3 defaults,noatime 0 0

Then run
mkdir /mnt/extra
reboot

Ohter things to watch out for?

Cheers!

#6849

From: "massimo" <wow84@...>
Date: Thu Feb 3, 2011 2:36 pm
Subject: 2TB compatilble HD

rizzomassimo

What 2TB HD I can use mounted onto a HS-DHGL machine or similar. Someone have
tried something specific?

Thx

#6850

From: "massimo" <wow84@...>
Date: Thu Feb 3, 2011 7:30 pm
Subject: Re: 2TB compatilble HD

rizzomassimo

--- In LinkStation_General@yahoogroups.com, "massimo" <wow84@...> wrote:
>
> What 2TB HD I can use mounted onto a HS-DHGL machine or similar. Someone have
tried something specific?
>
> Thx
>


it's okay WESTERN DIGITAL WD WD20EARS 2TB 64MB CAVIAR GREEN ?

#6851

From: "ycwkpp898" <ycwkpp898@...>
Date: Thu Feb 3, 2011 7:32 pm
Subject: Re: 2TB compatilble HD

ycwkpp898

--- In LinkStation_General@yahoogroups.com, "massimo" <wow84@...> wrote:
>
>
>
> --- In LinkStation_General@yahoogroups.com, "massimo" <wow84@> wrote:
> >
> > What 2TB HD I can use mounted onto a HS-DHGL machine or similar. Someone
have tried something specific?
> >
> > Thx
> >
>
>
> it's okay WESTERN DIGITAL WD WD20EARS 2TB 64MB CAVIAR GREEN ?
>

Hi, I would not use a western digital drive as they are 4k the samsung drive
deffo works. as its 512k. 4k drives are giving alot of people with NAS boxes
problems.

#6852

From: "ycwkpp898" <ycwkpp898@...>
Date: Thu Feb 3, 2011 3:26 pm
Subject: Re: 2TB compatilble HD

ycwkpp898

I have a Samsung HD204UI Spinpoint F4 2TB and is working totally fine

--- In LinkStation_General@yahoogroups.com, "massimo" <wow84@...> wrote:
>
> What 2TB HD I can use mounted onto a HS-DHGL machine or similar. Someone have
tried something specific?
>
> Thx
>

#6853

From: "steviewonderhello" <steviewonderhello@...>
Date: Fri Jul 8, 2011 1:42 pm
Subject: HS-DHGL_FW_230-shmod10

Updated to NasNavi 2.34
Updated to Twonky 5.1.9
Updated to uTorrent build from Apr 17th 2010 to July 9th 2010
Updated to BusyBox v1.18.4 (2011-04-04 18:30:20 CDT)

http://www.mediafire.com/?imsemxrj739zmi7

#6854

From: "Faton" <fatonuseni@...>
Date: Sun Jul 10, 2011 3:30 am
Subject: Re: HS-DHGL_FW_230-shmod10

fatonuseni

is it possible to install sabnzbd on this?

--- In LinkStation_General@yahoogroups.com, "steviewonderhello"
<steviewonderhello@...> wrote:
>
> Updated to NasNavi 2.34
> Updated to Twonky 5.1.9
> Updated to uTorrent build from Apr 17th 2010 to July 9th 2010
> Updated to BusyBox v1.18.4 (2011-04-04 18:30:20 CDT)
>
> http://www.mediafire.com/?imsemxrj739zmi7
>

#6855

From: "steviewonderhello" <steviewonderhello@...>
Date: Mon Jul 11, 2011 8:21 pm
Subject: Re: HS-DHGL_FW_230-shmod10

You can install anything you like


--- In LinkStation_General@yahoogroups.com, "Faton" <fatonuseni@...> wrote:
>
> is it possible to install sabnzbd on this?
>
> --- In LinkStation_General@yahoogroups.com, "steviewonderhello"
<steviewonderhello@> wrote:
> >
> > Updated to NasNavi 2.34
> > Updated to Twonky 5.1.9
> > Updated to uTorrent build from Apr 17th 2010 to July 9th 2010
> > Updated to BusyBox v1.18.4 (2011-04-04 18:30:20 CDT)
> >
> > http://www.mediafire.com/?imsemxrj739zmi7
> >
>

#6856

From: "Faton" <fatonuseni@...>
Date: Tue Jul 12, 2011 2:24 pm
Subject: Re: HS-DHGL_FW_230-shmod10

fatonuseni

is it possible to have it baked in? or some version of nzb downloader? i
couldn't get it installed on the last iteration.



--- In LinkStation_General@yahoogroups.com, "steviewonderhello"
<steviewonderhello@...> wrote:
>
> You can install anything you like
>
>
> --- In LinkStation_General@yahoogroups.com, "Faton" <fatonuseni@> wrote:
> >
> > is it possible to install sabnzbd on this?
> >
> > --- In LinkStation_General@yahoogroups.com, "steviewonderhello"
<steviewonderhello@> wrote:
> > >
> > > Updated to NasNavi 2.34
> > > Updated to Twonky 5.1.9
> > > Updated to uTorrent build from Apr 17th 2010 to July 9th 2010
> > > Updated to BusyBox v1.18.4 (2011-04-04 18:30:20 CDT)
> > >
> > > http://www.mediafire.com/?imsemxrj739zmi7
> > >
> >
>

#6857

From: "steviewonderhello" <steviewonderhello@...>
Date: Thu Jul 14, 2011 9:24 pm
Subject: Re: HS-DHGL_FW_230-shmod10

No sorry
the aim of the firmware is to have a
clean and fast working firmware
not to add every last option

I have extended the feature set of this device quite a bit alreay
and the performance

I get requests all the time for this added and that added





--- In LinkStation_General@yahoogroups.com, "Faton" <fatonuseni@...> wrote:
>
> is it possible to have it baked in? or some version of nzb downloader? i
couldn't get it installed on the last iteration.
>
>
>
> --- In LinkStation_General@yahoogroups.com, "steviewonderhello"
<steviewonderhello@> wrote:
> >
> > You can install anything you like
> >
> >
> > --- In LinkStation_General@yahoogroups.com, "Faton" <fatonuseni@> wrote:
> > >
> > > is it possible to install sabnzbd on this?
> > >
> > > --- In LinkStation_General@yahoogroups.com, "steviewonderhello"
<steviewonderhello@> wrote:
> > > >
> > > > Updated to NasNavi 2.34
> > > > Updated to Twonky 5.1.9
> > > > Updated to uTorrent build from Apr 17th 2010 to July 9th 2010
> > > > Updated to BusyBox v1.18.4 (2011-04-04 18:30:20 CDT)
> > > >
> > > > http://www.mediafire.com/?imsemxrj739zmi7
> > > >
> > >
> >
>

#6858

From: "rzr_online_fr" <www.rzr.online.fr@...>
Date: Mon Jul 18, 2011 8:34 pm
Subject: Re: NFS on Linkstation ProDuo

rzr_online_fr

--- In LinkStation_General@yahoogroups.com, "uday_patel" <uday_patel@...> wrote:
>
> Anyone running NFS on a linkstation Pro Duo? I would really appreciate

any update on native kernel nfs support ?

http://tech.groups.yahoo.com/group/LinkStation_General/message/6562

--
http://rzr.online.fr/q/raid

#6859

From: "Pawel Jankowski" <p.janko@...>
Date: Thu Jul 28, 2011 6:42 pm
Subject: Re: HS-DHGL_FW_230-shmod10

p.janko

I tried and succeeded, thou it was too heavy for LSPro.
Try NZBGet instead http://nzbget.sourceforge.net/Main_Page
There is even OptWare installation guide and Web-interface (don't remember if
any changes were required, but it should be relatively simple). Works great on
my box.

--- In LinkStation_General@yahoogroups.com, "Faton" <fatonuseni@...> wrote:
>
> is it possible to have it baked in? or some version of nzb downloader? i
couldn't get it installed on the last iteration.
>
>
>
> --- In LinkStation_General@yahoogroups.com, "steviewonderhello"
<steviewonderhello@> wrote:
> >
> > You can install anything you like
> >
> >
> > --- In LinkStation_General@yahoogroups.com, "Faton" <fatonuseni@> wrote:
> > >
> > > is it possible to install sabnzbd on this?
> > >
> > > --- In LinkStation_General@yahoogroups.com, "steviewonderhello"
<steviewonderhello@> wrote:
> > > >
> > > > Updated to NasNavi 2.34
> > > > Updated to Twonky 5.1.9
> > > > Updated to uTorrent build from Apr 17th 2010 to July 9th 2010
> > > > Updated to BusyBox v1.18.4 (2011-04-04 18:30:20 CDT)
> > > >
> > > > http://www.mediafire.com/?imsemxrj739zmi7
> > > >
> > >
> >
>

#6860

From: "wordsworth1976" <wordsworth1976@...>
Date: Thu Jul 14, 2011 9:01 am
Subject: Re: HS-DHGL_FW_230-shmod10

wordsworth1976

Thanks take the time to create a updated version of the firmware. Can you tell
me the port that firefly daap server is running (is it still in this version as
it was in previous ones?)

Mark
--- In LinkStation_General@yahoogroups.com, "steviewonderhello"
<steviewonderhello@...> wrote:
>
> Updated to NasNavi 2.34
> Updated to Twonky 5.1.9
> Updated to uTorrent build from Apr 17th 2010 to July 9th 2010
> Updated to BusyBox v1.18.4 (2011-04-04 18:30:20 CDT)
>
> http://www.mediafire.com/?imsemxrj739zmi7
>

#6861

From: "wordsworth1976" <wordsworth1976@...>
Date: Thu Jul 14, 2011 9:15 am
Subject: Re: HS-DHGL_FW_230-shmod10

wordsworth1976

Seems I just need to turn itunes on in Shared folders > Service Setup and then
use port 9025.

Mark
--- In LinkStation_General@yahoogroups.com, "steviewonderhello"
<steviewonderhello@...> wrote:
>
> Updated to NasNavi 2.34
> Updated to Twonky 5.1.9
> Updated to uTorrent build from Apr 17th 2010 to July 9th 2010
> Updated to BusyBox v1.18.4 (2011-04-04 18:30:20 CDT)
>
> http://www.mediafire.com/?imsemxrj739zmi7
>

#6862

From: "Pawel Jankowski" <p.janko@...>
Date: Thu Sep 15, 2011 11:21 pm
Subject: HS-DHGL_FW_230-shmod10 - bittorent password reset

p.janko

Hi.

I just installed the HS-DHGL_FW_230-shmod10. I tried to log into bittorent
webgui and it asked for a password. I tried <blank>/<blank> as it's how it was
in shmod9 but it wouldn't work. So I tried admin/<blank> and it worked. As I got
used to previous setting I changed it to <blank>/<blank> and now I cannot get
access to webgui at all. Neither <blank>/<blank> nor admin/<blank> works any
more. I tried to re-set to factory defaults, re-flash the FW and even
force-flash shmod9 but nothing worked. I tried to search for config file
manually. Tried to replace settings.dat with settings.dat.old in
/usr/local/bittorent but it had no effect. Is there any way to reset the
password?

Thanks,
Pawel.

#6863

From: "Pawel Jankowski" <p.janko@...>
Date: Fri Sep 16, 2011 10:28 pm
Subject: Re: HS-DHGL_FW_230-shmod10 - bittorent password reset

p.janko

Solved:

connect via SSH
go to /etc/init.d
run:
./bittorrent.sh StopBT
./bittorrent.sh init
./bittorrent.sh configure
./bittorrent.sh StartBT

Log into WebUI using username: admin / password" (blank)


--- In LinkStation_General@yahoogroups.com, "Pawel Jankowski" <p.janko@...>
wrote:
>
> Hi.
>
> I just installed the HS-DHGL_FW_230-shmod10. I tried to log into bittorent
webgui and it asked for a password. I tried <blank>/<blank> as it's how it was
in shmod9 but it wouldn't work. So I tried admin/<blank> and it worked. As I got
used to previous setting I changed it to <blank>/<blank> and now I cannot get
access to webgui at all. Neither <blank>/<blank> nor admin/<blank> works any
more. I tried to re-set to factory defaults, re-flash the FW and even
force-flash shmod9 but nothing worked. I tried to search for config file
manually. Tried to replace settings.dat with settings.dat.old in
/usr/local/bittorent but it had no effect. Is there any way to reset the
password?
>
> Thanks,
> Pawel.
>

#6864

From: "David" <dlfisher@...>
Date: Sat Sep 17, 2011 11:55 pm
Subject: HS-DHGL_FW_230-shmod10 install problems...

neuropsyche

I'm trying to push the shmod10 firmware to a TeraStation Live II but the
terastation lsupdate says that it cannot find any devices.  I have 4 of them on
the network and it can't find any of them.
All are accesabile through webgui...  but the lsupdate cannot find them.

i remember that there was a switch you could place in the .ini file, something
like /force to force the update.

if anyone has any ideas can you pleaes post?

Thanks a bunch!

#6865

From: "steviewonderhello" <steviewonderhello@...>
Date: Wed Sep 21, 2011 3:33 am
Subject: Re: HS-DHGL_FW_230-shmod10 install problems...

Its not for a TeraStation is why

--- In LinkStation_General@yahoogroups.com, "David" <dlfisher@...> wrote:
>
> I'm trying to push the shmod10 firmware to a TeraStation Live II but the
terastation lsupdate says that it cannot find any devices.  I have 4 of them on
the network and it can't find any of them.
> All are accesabile through webgui...  but the lsupdate cannot find them.
>
> i remember that there was a switch you could place in the .ini file, something
like /force to force the update.
>
> if anyone has any ideas can you pleaes post?
>
> Thanks a bunch!
>

#6866

From: "steviewonderhello" <steviewonderhello@...>
Date: Wed Sep 21, 2011 3:52 am
Subject: HS-DHGL_FW_231-shmod11

No real reason to update from mod10
I did this for myself in august

and decided to post it incase anyone wants it
as i doubt i will be updating anything else in a while

Firmware 2.31

NasNavi 2.35
Putty 0.61
rm usr/local/share/doc

http://www.mediafire.com/?vraha2jznzb3cr7

#6867

From: "A Concerned American Citizen" <michael@...>
Date: Wed Sep 21, 2011 2:13 pm
Subject: Linkstation Quad

schievelbein

I am hoping that someone on this forum can help me.
I think I actually have two issues, but need advise.

I have an 8TB LinkStation Quad with 4-2TB drives in RAID = 6TB.
I have it set up into 2 shares of 3TB each.
I currently have two 3TB WD External Drives on a PogoPlug on the network that I
sync with the LS shares, because I can not get them recognized by the LS Quad.

I am a paranoid backup person, so my data goes like this:
Working drives in desktop -> Shares on LS Quad -> 3TB drives
I am trying to mount the 3TB drives to the LS Quad and be able to get rid of the
PogoPlug, because it is a pain and requires special drivers and junk.

My two questions:
1) Has anybody gotten the 8 USB drives mod to work on a Linkstation Quad with
firmware 1.11?
2)  Is there any way to mod the LS Quad to accept 3 TB drive?  I am open to
loading an OpenNAS or similar, but they do not appear to work with 4TB drives
either.

#6868

From: "smile_02851" <smile_02851@...>
Date: Thu Sep 29, 2011 12:55 am
Subject: HD-HLAN v2 MIPS (LS2) - Reloading Help

smile_02851

I have a linkstation that was working great till recently running free link with
GUI management tool webmin.  Now I am left with a Linkstation HD-HLAN v2 MIPS
(LS2) with a base image installed on a new HD..  Is there any way to get it back
to running freelink (or something like it) and webmin?

I have tried reloading freelink on it, but most of the updates fail because the
sources are no longer available.

Any Help would be great

#6869

From: "emarinuk" <eduardo@...>
Date: Thu Oct 20, 2011 10:50 pm
Subject: Can't connect via telnet

emarinuk

Hi all,

I just started playing with a Linkstation Duo LS-WTGL/R1-V3 Firmware 3.09 and it
is refusing telnet conenction.

Firewall's open for port 23.

Am I missing something here?

Thanks,

E

Reply | Messages in this Topic (3)

#6870

From: Rusty Haddock <rusty@...>
Date: Fri Oct 21, 2011 2:32 am
Subject: Re: Can't connect via telnet

kd4wlz

emarinuk wrote:
     >Hi all,
     >
     >I just started playing with a Linkstation Duo LS-WTGL/R1-V3
     >Firmware 3.09 and it is refusing telnet conenction.
     >
     >Firewall's open for port 23.
     >
     >Am I missing something here?

Is there a telnet daemon running or is port 23 listened to by the
xinetd daemon?

	 -Rusty-
--
    _____                Rusty Haddock  <=>  AE5AE
|\/   o \   o             Way out yonder in the
|   (  -<  O o      Van Alstyne (TX) Metropolitan Area
|/\__V__/       Math illiteracy affects 7 out of 5 people!

Reply | Messages in this Topic (3)

#6871

From: "emarinuk" <eduardo@...>
Date: Fri Oct 21, 2011 10:06 pm
Subject: Re: Can't connect via telnet

emarinuk

I donot think so, but I do not know how to be 100% sure.

How can I know that?

--- In LinkStation_General@yahoogroups.com, Rusty Haddock <rusty@...> wrote:
>
> emarinuk wrote:
>     >Hi all,
>     >
>     >I just started playing with a Linkstation Duo LS-WTGL/R1-V3
>     >Firmware 3.09 and it is refusing telnet conenction.
>     >
>     >Firewall's open for port 23.
>     >
>     >Am I missing something here?
>
> Is there a telnet daemon running or is port 23 listened to by the
> xinetd daemon?
>
>  -Rusty-
> --
>    _____                Rusty Haddock  <=>  AE5AE
> |\/   o \   o             Way out yonder in the
> |   (  -<  O o      Van Alstyne (TX) Metropolitan Area
> |/\__V__/       Math illiteracy affects 7 out of 5 people!
>

Reply | Messages in this Topic (3)

#6872

From: "ataridal" <dwetherilt@...>
Date: Sun Oct 30, 2011 10:16 am
Subject: Linkstation Live and rsync

ataridal

Hi,

I have a LS live (unlocked) and currently configuring it to mirror contents via
rsync to an external server.  I notice that the version of rsync on the box is
3.0.3 and I'm wondering if anyone has attempted to update it to 3.0.9 yet?

If so, could you advise me which rpm package to use? Can I just take the current
ARM compilation or is there a specific build I should be using for the LS?

Many thanks.

#6873

From: "ehrenrej" <joe.ehrenreich@...>
Date: Thu Nov 3, 2011 9:13 pm
Subject: OFFER: Three Bales Of Hay From Halloween

ehrenrej

Pickup In SE Richmond.