I must have missed an important message because I have no HRIT images after 1145. I have checked on the parallel data to see if we had gone over to that, but...
Robert, No problem here HRIT data coming in normally. Looks like the problem is at your end -- hope you resolve it soon. Regards Ian. ... From: "Robert...
Thanks Ian - a reboot of the receiver PC fixed it. Very deceptive because reception stopped very neatly on the last sequence before noon. I had changed...
All, As noted in the ADMIN message as a possibility of 'image degradation' I see there is currently (23:30 GMT Tuesday) a shift in the image data compared to...
Seems to be a problem with IR and WV channels since the 14.15 UTC cycle --- they are far too dark. Just noticed as I prepare this mail that the 14.30 cycle...
... Agreed, Ian. The parallel processing (chan 5/6) seemed OK for the 1500, but not the normal channel. I saw only the start of the 1515 but it looked OK on...
Not good David, well over 8 hours. Assume the problem is with your ISP as I am not seeing any Yahoo issues at the moment with group mails. Regards Ian. ... ...
... Thanks, Ian. In this case, the e-mail was sent via SMTP directly to the yahoo e-mail server, not via my ISP at all..... I'll send this e-mail from my ISP...
That explains why I appeared to have a missing segment on the 6/2/08 on my channel 9 animation, but Data Manager was not reporting the segment as missing. ...
... Yes, Ian, the presence or absence of a segment is all the Missing Segments Report tells you. I hadn't spotted the error - been to busy! Cheers, David -- ...
xrit2pic release 2008.01 is now available: http://www.alblas.demon.nl/wsat/software/soft_msg.html The commandline xrit2pic is also updated (doesn't need GTK). ...
Over the last three days or so the above data and associated met. products has been extremely erratic. We appear to be in a situation where we get one orbit...
Hi Ian, Certainly a lot of missed segments from NOAA GAC. NOAA AVHRR seems unaffected. What seems strange is that each message indicates when normal service...
... Yes, perhaps things are more iced-up than usual, or perhaps a comms link is down or intermittent. I think the data is sent from Fairbanks (or wherever) to...
... am ... in ... information ... Observation ... as to software ... at EUMETSAT ... of ... be data ... for the ... and ... these 'reception ... nightmare. ...
hi, we are about, to set up new reception computers (they are already selected), but they do not have any PCI slots... currently we are using pentamedia cards,...
I've got a Linux system running well using Fedora Core 7 on a Fujitsu Siemens Eco 100 using a PCI SkyStar2 card. The kernel module/driver for the card is...
... nice hint thx, this one http://www.linuxtv.org/wiki/index.php/TechniSat_SkyStar_USB_/_Sky2PC_USB works..., but it's usb 1.1, which slow the whole stuff...
On Thu, 21 Feb 2008 09:34:53 -0000 ... [] ... Hi Michael, I'm currently testing a P4 2Ghz with 700Mb RAM and SkyStar USB receiver under debian etch, but still...
... we will use debian too :) didn't you use any ramdisk yet? Skystar USB is USB 1.1 right? isn't that too slow for the reception of the large amount of data?...
On Thu, 21 Feb 2008 17:18:39 -0000 ... Yes, for now I've enabled [EUMETSAT Data Channel*] after I wrote the email, I've fixed the kernel start-up to create the...
Hello Michal, Be careful with the Skystar USB 2 ! This new box is not available yet and I have not seen drivers for it. Not all Technisat products use the...
hello david, normally i receive all data channels, i've been away for a while.. and now i only seem to receive the TSL Announcement Channel thats pid...
... Peter, Some random thoughts: - try reselecting HotBird EUMETCast by right-clicking the green satellite icon. - try rebooting, with a power-off between...
ok i will try,thanks david ... From: David J Taylor To: MSG-1@yahoogroups.com Sent: Sunday, February 24, 2008 3:14 PM Subject: Re: [MSG-1] no data ... Peter, ...
