... Sorry for the signifcant delay in replying. I now have it working through 2 PCs. Reception measurements for Hereford, U.K. are: 17 degrees on the 0 to 50...
Happy New Year to all,
I've got it working!!!!!! MRTG that is!
Couldn't make open xtra build a usable config file. Tried PRTG and got graphs of network...
Hi all, Well I finally got the .html written and here is the url <http://www.dctower.co.uk/skystar.html> Now to get the ftp script polished a bit and called...
Well well!, A reboot resulted in the data going wonk! it seems that snmpd renumbered its data streams - ! Sorted now - which explains the funny gap in the data...
Ok me again, <http://www.dctower.co.uk/skystar.html> Now more polished (a bit) and updated every hour (just after the hour) Nick -- 'The only reason we're...
Alan Banks wrote:
> Happy New Year to all,
> I've got it working!!!!!! MRTG that is!
[]
> My wife thinks I've taken up residence in the 'office' and was
>...
Nick Norman wrote:
> Hi all,
>
> Well I finally got the .html written and here is the url
>
> <http://www.dctower.co.uk/skystar.html>
>
> Now to get the ftp...
Nick Norman wrote:
> Well well!,
>
> A reboot resulted in the data going wonk! it seems that snmpd
> renumbered its data streams - !
>
> Sorted now - which...
... Same as the graph - think when the thunder storm took out the skystar card, it did some damage to the lnb as well off group reply on the other matters on...
Just here - think the LNB finally gave up the ghost - and just as I'd got the mrtg system sorted! Oh well looks like a new one and a cold (wet & windy?) job on...
I have a sudden drop of SQ & SNR on system-2 at 17, while system-1 is flat... Different behaviour of cards, since line is the same with RF splitter... anyway...
Giuseppe Cico wrote:
> I have a sudden drop of SQ & SNR on system-2 at 17, while system-1 is
> flat...
> Different behaviour of cards, since line is the same...
SQ & SNR are back to usual values... it was related to LNB driving through RF splitter... I tried restarting setup4pc on system-1 (the other...) and they've...
Hi to the list, I want here to thank Giuseppe Cico for his very important via e-mail support in installing on my Eumetcast receiving PC a new MRTG monitoring...
There is now a simple utility to select the channels to be processed by Tellique. This is especially handy if you don't want to receive everything and want...
Hello to all on group. Sorry in advance for my poor english. On your opinion , for tellicast software, is better installation as service or installation as...
iz1kbp wrote:
> Hello to all on group.
> Sorry in advance for my poor english.
>
> On your opinion , for tellicast software, is better installation as
>...
Hi David , Hi to all ...no problem ...i suppose...I'm asking about service or program only because the service (working in background mode )may have more...
Hello Mario, I always used the program option. XP and W2K have by default best performance set for programs, not for background services. in XP check "System...
Hello Arne, Tnx for you ansvers... From this morning i'm traing to switch tellicast as program o service but....unitil now...like your experience...i'haven't...
Hi to all the non-english speakers.
Stop apologising for poor english. Usually its perfectly understandable.
We English should be apologising for not being...
OK, Just done a change / update of the way I do this! Ignore the spurious data it was faked to check the scripts etc. Throughput is monitored by SNMP, the...
A tardy Happy New Year to all (I've been away for 3 weeks). I fitted a new PC card Rx to my desktop PC, to improve data speeds for EPS, and thought I'd try...
I have no experience of such matters and am uncertain how this can occur. Does it mean that a splitter can only be used to supply separate receivers on the...
Peter Green wrote:
> I have no experience of such matters and am uncertain how this can
> occur. Does it mean that a splitter can only be used to supply
>...
You have to remember that the cable between the receiver and the LNB is bidirectional and carries control signals from the receiver to the LNB (as David...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
