Thanks for the observations on my problem James - really moving into new territory for me 1. I don't suppose your EKU is getting flaky? I know some had to be...
Hello Robert, Be careful when looking at missing AVHRR data, for instancte my Noaa17 1606 pass at March 31 over the NorthPole looks like a Zebra crossing !...
Faulty EKU: Check the number on your EKU "Message from Eumetsat: Following the failure of several EUMETCast Key Units (EKU) within the serial number range...
Thanks Arne, that will be my evening job (too nice in the garden now). I have missed 16 segments of MSG-1 so far today (to 1430 UTC) METOP has been better than...
Hi Robert, Use Isopropyl Alcohol - the same stuff that you clean records (black plastic round things that have music in the grooves) and CD's with Alan...
Thanks Alan - this will be the next stage. First I have tightened the connection between cable and card: because of the very awkward location of the PC I found...
I had 14 lost segments by 0845 UTC today. So I'm on the way to losing more than yesterday and Friday (15 by 1400 and 16 by 1430 respectively). Ensuring the...
Hi All, I found the solution for this problem: * Files EPG.ldb and EPG.MDB in DB folder of Tecnisat DBV, were damaged (Arne you give me de key.....) and it was...
Misery me! 37 missed segments by 1930 tonight. Unless they have been lost over the poles it looks as if METOP was no too bad - though some missing chunks. So...
... I am not using Fedeora Core 6, but with Ubuntu 7.04 (kernel 2.6.20-12) i had to create those entries manually: sudo mkdir -p /etc/hotplug/usb/ sudo touch...
Hi Group. An update on my situation. Further to previous post I have now got to the point where I have tried everything I could think of and also helpful hints...
There is a new version of the Tellique channel selector "tqchansel", for Windows: v2_1. This one has under the menu a preferences item in which you can select ...
Hello Paul, Please note that MetOp over Ecast is still in trial phase. I also had missing chunks on April 2nd. Don't bother about LNB's or dish alignment when...
... [] ... Folks, Just to add to Arne's comment - on my own Intel 1GHz Pentium III system an 80MB RAMdisk is fine and there is very little MetOp segment loss. ...
My troubles deepen. From 1830 UTC last night I get a _massive_ loss of segments. Fifty percent on some MSG-1 cycles. I don't think I have one complete, usable,...
Yes I do agree, but a 130 MB fsy file means that very likely you have lost 3 MetOp chunks and in 24 hours considering the amount of data that many are taking...
Hi Robert,Hi to all... I'm sorry but i haven't any solution. I had same problems but with METOP and I had never found any valid solution.I had bypass the...
Hi Dani, I see you use Fedora Core 6. I tried to setup MSG reception with a Skystar2 PCI card with FC6, but it did not work for me. The Skystar2 was...
Hello Arne. Thanks for your reply. Can you confirm that your Pentium 4 at 3Ghz system is running as a single rx + processing system and what data you are...
Hi Paul, 192.168.238.238 is a default IP address which is only accessible from your own PC. It is not accessible from the internet. Try Control Panel Network...
hello Paul, Yes my P4 runs single setup, takes all data except DWDsat and LRIT. I process HRIT+FSD using MDM and process AVHRR using AVM. Currently only EPS-10...
Just a thought Robert, Why not disconnect your RX PC from your home network for say 10 hours and see what happens ? Without network there won't be any access...
Yes Arne, I am sure you are right that the problem segment/chunk loss is the operating system and not the dual core Athlon. Clearly I could answer the ...
Hi Alan. Bit of typo on my part sorry the test from PcPitstop showed internal ip address as 192.168.238.238 (not internet ip address as originally stated) I am...
Ian, I have found that networking Vista 32-bit Ultimate to an XP network is a breeze, easier than with XP itself. Also, I disagree with you about Animator not...
Hello Arne Just checked in device manager-Network adapter then Technisat DVB-PC TV Star PCI then properties and Driver TAB it shows as 4.3.3.0 date 09/01/2005...
Paul wrote: [] ... Paul (and others), just to clarify something. Most of my MRTG monitoring is done on a non-TelliCast PC, which queries the other PCs over...
hello,i've a problem receiving data, T is pink, http shows lots of data coming TRHU but there is no data coming in my received map, telliq logfile shows this: ...
