Hello Pedro, As I understand you have already set the exposure at 2.5 seconds. That is just fine. But, if I remember well the lx200 supports correction...
i use phd softwere and dsi2pro and guide with 10 in at fR6.3 F6.3 that's ok? pedro To: Meade-DSI-Advanced@yahoogroups.com From: amortalis@... Date: Sat,...
It's OK, I've done it that way before using the 12" LX200GPS but it takes a lot of attention to detail to make it happen. Balance is very important, PEC...
thanks matt for replay and thanks for your help. i would like to buy a GEM mount.what mount do you recommend? but a reasonable price like 2800.00 or less Pedro...
Hmmm, well in that price range you are somewhat limited. About the best you can do for that amount, or at least close to that amount would be the Losmandy G11....
... If you want a *real* challenge, get a LXD-75! :) I went to my first informal star party a few weeks ago and I was still fiddling with things while...
Hi Everybody, I am a new guy in astrophotography and have a DSI III color camera. I could install it without any problem and can use it with both Envisage and...
I have looked through the archives of several groups (MaximDL, MeadeDSI and this one) and cant find the answer to my question. When I try to use MaximDL (5.07,...
Pedro, A used G11 with Gemini would be good. For ease of use I prefer the CGE which you can get used for around $2000. Both of these mounts would handle the...
Hi, 1a.) The 'checkerboard' pattern is a direct result of viewing a 'RAW' (black and white) image that still contains the 'Colour Filter Array' (CFA), or...
Hi Mark, For simplicity I am going to repeat the entire posting I just made a few minutes ago - to a question posted about DSI-IIIC imagers. The information is...
You might try http://www.astrosurf.com/buil/us/iris/iris.htm I believe you can select a de-Bayering routine that might solve your problem. You certainly can't...
I actually have the DSI 3 color too, and I was wondering which is the best format to use to get the most out of my images. Ive just been using the latest...
Niall, Thanks for that great info... I put three screen captures into the Files/Help Me folder (MaximDL-ConvertColor.jpg, MaximDL-ConverColor-Retouch.jpg, and...
Hi Niall, Thanks for your detailed explanations. I will study this camera more deeply and revert if necessary. Thank you for your help in advance. Attila ...
Why when ever I try to take a picture of jupiter do I always end up with an over exposed image. I have only ever managed to get an image where I could see the...
I have a DSI II color that I just started using and I find it VERY critical as to the exposure of bright objects. I imaged Jupiter a few nights ago using my...
Hello: I'm a newbie and have not done any CCD imaging but have a strong desire to try it. I'm thinking of getting a DSI II Color imager. My scope is an 8"...
I have a dim recollection that you can do this in a rudimentary way. However, as I recall, guide commands can only be sent in between imaging subframes, making...
Hi group i would like connect my lx200gps with my new laptop windows vista (32bit). the autostarII has V4.2g. with my laptop and xp system works fine with...
Pedro, I have the a Dell system running Vista 32bit and my DSI Pro II, Envisage 7.05 and Autostarsuite 5.0. Have you downloaded these latest versions of the...
thanks joel for your help i will try to do tomorrow thanks again pedro To: Meade-DSI-Advanced@yahoogroups.com From: joelandkarenshort@... Date: Sat, 10...
So, I just purchased a new color DSI-III to replace my DSI-II. My biggest concern so far is the horizontal banding I'm seeing. Is this common? The only...
Steve, Using a non-powered hub to run 2 cameras I am suprised you are not seeing more problems. The USB ports are only rated at 500ma max. I know the DSI Pro...
Thanks Wes! Sounds like I'm pushing the edge then. I'm going to try to find a wall wart for this hub. It says 5v, 2.6A; failing that I guess I buy a new hub. ...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Meade-DSI-Advanced group. File : /!...
Meade-DSI-Advanced@ya...
Nov 1, 2009 8:28 pm
7038
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Meade-DSI-Advanced group. File : /!...
Meade-DSI-Advanced@ya...
Nov 1, 2009 8:30 pm
7039
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Meade-DSI-Advanced group. File : /!...
Meade-DSI-Advanced@ya...
Nov 1, 2009 8:31 pm
7040
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Meade-DSI-Advanced group. File : /!...