Thank you for participating in the Meade 4504 Telescope group at www.groups.yahoo.com. Your contributions to this group are valuable, and we hope you will...
Meade4504Telescopes@y...
Aug 1, 2005 8:42 pm
9578
Has anyone installed a binocular viewing system on thier 4505?...
I found one lying on the ground outside a dumpster. Well, part of one anyway. I'm going to make a project out of this. It says "INFINTITY" on the side with "BY...
... Finally! I get a chance to contribute. You can get a 10 AA battery holder for the Dec motor here for less than $3 each. http://www.thomas-distributing.com...
Interesting: mine does not have the "DIGITAL-Starfinder" graphic on it as I see on online pictures, nor any indication that a decal or paint had been in that...
... http://www.thomas-distributing.com/battery-holders.htm the part you want is 3/4 of the way down the page, part number MS-BH-10-AA the 10 AA battery...
I was wondering what the difference was with the 4500 because i haven't been able to find anything under model 4504. Plus, i paid $190 for it. Did i get ripped...
Congratulations on your new scope! Meade made several models of the 4500 series. If you have an actual 4504, it should have a "GO TO" system. I have a 4501,...
Now I've gone and done it. I removed the secondary mirror in order to get a better look at it and measure it. From the message below, it sounds like a good...
In a message dated 8/11/05 11:59:41 A.M. Central Daylight Time, dburns_chelmsford@... writes: So if I can clean/replace the secondary mirror, I will...
I just called Meade and they very quickly sent me the 1.25" adapter and I purchased the 9mm 1.25 eyepiece Antares Kellner 1.25" Eyepieces from ScopeStuff.com...
has anyone got any information on a replacement eyepiece housing and focusing mechanism replacement for a Meade 4501? I'm not really very happy with the...
Howdy, I bought a replacement for mine from Islandeyepiece. It is a rack and pinion focuser and isn't perfect but much better than the stock on your scope. The...
Hey, I use a Nikon CP4500 also and may be able to help. Are you talking about the Digi-T from Scopetronix? If so, I use that on EPs other than my Scopetronix...
Are you troubled by focuser slop?. Bouncy jerky making you naseus? Well, have we got the handy dandy cure for you. Pull it off. Have a good close looksee what...
Scott, thanks... I've already dismantled it and checked for "slop" and such. It really seems to be a case of a very coarse focusing system where a finer one...
I want to upgrade to a larger tube (An orion 254mm f/4.7 Reflector Tube Assembly) Will my tripod be able to accomodate this size and will my go to tracker...
Can I just say thanks to everyone who makes this such an active forum. Befor I had found this I had been convinced by other sources on the net that the scope I...
Being a new owner of a 4495c scope I just wanted to say Hi. Due to my Father-in-laws ill health he finally admited he will never be able to see through the...
I'm responding here due to my receiving a bounce from your Yahoo email account: ================================================== At 05:44 AM 8/17/2005, you...
Thanks for your reply. ... That's funny, they retired my email addy but not my groups acct? Oh well, I changed email addy. Thanks for letting me know. ... ...
I take it the site isn't the same as it used to be? I follow links and just get some placeholder site with junk links? Being new here, I dont know if i'm...
Hi, Welcome! I can't find info on model 4495c. But if you check if its design is same as this: the focuser drawtube (silver colored) has the male thread (about...
... I've been trying to contact Telescope Warehouse and it appears they may no longer be around. Is there a new link / phone number for them? thanks in...
Hi, Please start with: http://stores.ebay.com/Telescope-Warehouse Also click "me" on that page to link to his own site. ccs_hello ... one. He ... has ... the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
