Hi Tim, The camera is about twice as sensitive to red as it is to green and blue, so you typically want to use 1/2 the exposure time for red that is used for...
Hi Steve, Yes, the same is certainly true for the DSI II Pro, and DSI I Pro as well. Use 1/2 the total exposure time for red that is used on green and blue to...
... Yup. BTW I *think* that Vista's System Management tool lets you down-size partitions like Win7's, but I'm not positive. ... That is very surprising to me -...
Thanks Tom, Â Steve ... From: Tom King <tking2097@...> Subject: Re: [Meade_DSI] Balancing Color with RGB - Need Help To: Meade_DSI@yahoogroups.com Date:...
Joel, I just checked that VMWare Player (Free) running an XP (32 bit) guest VM under Win7 X64 Pro can run the GPUSB ok. Well actually I only ran the GPUSB...
Thanks for the response Laurie. Yes, I had thought about reinstalling Win 7 32bit instead of 64bit, but decided I wanted the full RAM capability. It's good...
Hi Tom and the group.... I was thinking about this...wouldn't you want to shoot the same number of subs to average together to reduce noise but shoot longer...
Hi John, What you suggest will give a proper color balance, since the red total exposure time will be 1/2 the amount of total exposure time for red and green....
What I was talking about is attempting to balance the RGB values by adjusting the exposure time for each sub so that when combined they would be equal....
Thanks for the advice. I went back and stacked fewer red sub exposures of the same length (10 minutes). It helped. I was able to produce white stars and a...
Tim - It is good to hear you were able to recover your work! :-) The readout noise will be present whether you turn the amp on or off in software. The...
Hi all How about for the Atik 16hr? Thanks. Art In a message dated 11/2/2009 11:14:22 P.M. Central Standard Time, tking2097@... writes: Hi Steve, Yes,...
Hi Art, Since all I have are Meade cameras, this is not an answer I know, but there are a few simple things you can do to find out. The starizona link John...
Thanks Tom I downloaded the starizona link as you suggested and will dive into it. Regards Art In a message dated 11/4/2009 5:23:47 P.M. Central Standard...
Congratulations to Rick Andersen, winner of the October monthly challenge, which was open to all targets. Rick captured IC1805/Melotte 15 with a DSI Pro II,...
Arthur: Try this site: http://www.12dstring.me.uk/fov.htm Bill _____ From: Meade_DSI@yahoogroups.com [mailto:Meade_DSI@yahoogroups.com] On Behalf Of arthur4278...
... Meade says that the DSI III is 10.2 mm x 8.3 mm and the DSI II is 5.58 mm x 4.68, making the DSI III about 80% larger, linearly, than the DSI II. How much...
... Meade probably decided they weren't selling well enough or were not profitable enough even if they did sell. Meade is in a tight place financially. One...
That's a very good point. I hope they will eventually release enough information about them so that the programming community could produce a good driver (I'm...
It's been so long since we had skies for imaging at all that it probably took me almost as long to figure out what I was doing again as it did to capture these...
I usually am not much of a fan of synthetic color palette processes, but this Rosette changes my mind, and is simply perfection on all counts. You should try...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
