I don't have any parts. Are you trying to get all the cameras working or just the lighting. I belive if you don't want to use the built in cameras it is a lot...
Hi, I'm looking for a camera to capture fluorescence images. I am thinking about buying one from Tucsen, because they use the same sensors as the "name brands"...
Hi all I have four Leitz Pv objectives, in 2 of the objectives, namely Pv Apo L40/0.70 (n), 170/0.11-0.23 and a Pv20/0.45 (h) the phase ring is clearly...
I use mostly 10x eyepieces and on the rare occasion I use my 20 & 30x eyepieces. I only need the high power for mineral identification. The field of view is...
I use mostly 10x eyepieces and on the rare occasion I use my 20 & 30x eyepieces. I only need the high power for mineral identification. The field of view is...
Yep, that's normal for the Pv's. The rings are very small and with a larger diameter as 'normal'. They work better with thin specimen than modern phase sets,...
Hallo Kevin, many thanks for your answer, yes, I had already read some time ago the article that you have shown me and I was ready to expect a lower yield in...
I use the B&L Ultra Widefields with my Stereo-2 and Stereozooms. They are truly amazing to behold and have excellent eye relief (I wear glasses) but have two...
Hallo David, many thans for your reply, the Micscape article on LED is very interested, but, I too, I began my experience with fluorescence building...
I don't have any parts. Are you trying to get all the cameras working or just the lighting. I belive if you don't want to use the built in cameras it is a lot...
Hi Augusto, sorry to bump in, what's the UV-filter you have in place with the HBO-50W?? The HBO lamp gives of course a line spectrum, and you might miss the...
Hi again. You're right, if the green excitation was down as well, then its not the problem I referred to. As Rene, mentioned, the next likely suspect would be...
Hi Kevin, Renč and Fred, I try to better answer your questions as possible. There is no UV filter in place with the HBO 50W. There is no BG39 filter between...
Nice photos! Thanks for sharing. I also have an AO Series 10 and a darkfield condenser. Could you tell me the catalogue number printed on your condenser? Also,...
Augusto, I do not know the characteristics of your filters, but if you check at http://web.uvic.ca/ail/techniques/HBO%20spectra.jpg you can see that you can...
Hi Steve, Thanks for the response. Looks like a good deal. I would like a trinoc, though. I think I'll wait for a deal on one of the quality name brands to...
Hi Gordon, I think all of you have convinced me to wait and look for a name brand scope. I really want to get into phase contrast and darkfield optics and that...
Could anyone out there tell me what is the proper light bulb for a leitz ortholux I microscope to be used for routine light microscopy. I also need to know...
Hi everyone, How are you doing today?is anybody working with Nuance Multi Spectral Camera?I have some problems in working with this camera.I need some guidance...
Hi Kumar, I don't have any specific experience with the Nuance camera, just some very limited time on a Zeiss 710 multi-spectral confocal. However, I think...
Rene, It sounds like there is some sort of problem in the lamphouse, such as the bulb not inserted properly or a missing collector, etc. Is this a new Zeiss...
I wonder if anyone can advise me as to the likely cause of a collimation problem I have with an early 1970s Zeiss Jena SM 20 stereo microscope? The `scope has...
Ken Thank you for your compliment. I'm afraid that I don't have a dark field condensor. I have a phase contrast condenser. If I set the condenser as if I am...
Ken, Sorry, I forgot to mention that the cat. no. on the condenser is 1240. Steve ... From: kw1508 To: Microscope@yahoogroups.com Sent: Friday, July 03, 2009...
Hi again Rich, As for the quality of the glass, they're likely all the same quality. Standard optical quality, multi-coated lenses. However the infinity relay...