Got a Twonky question for the group. i just purchased the Twonky Media server this week. Im wondering if anybody has been able to implement any of the ...
Check out the files section of this group. You'll find a very good FAQ for listening to RealAudio on the MP101 ... internet ... mp3 ... (No ... this ... file ...
I was having this problem as well as the problem of them skipping throughout playback even without going to the next song. Tried all the fixes, turning off the...
I was having severe skip problems as well as losing the signal every half our or so. After reading some of the suggestions on this board, I downloaded the...
I have just got the kit home and having some issues - well one big issue, the MP101 can't see the server. I have them both connected thru a wired (gave up on...
The base PC is running XP SP2 and the firewall is turned off on that - the Netgear FM114P has a firewall but I thought only between LAN and WAN?? I'll have a...
Can't see anything in the Netgear FM114P router settings - the way I read it, the settings there are between LAN and WAN. I have the PC and MP101 both on LAN...
Odder and odder - the PC was wirelessly connected and so I thought I'd try and eliminate one more thing by connecting both the MP101 and PC into hard wired...
It's not that strange. It's strange for a home LAN maybe, since not many homes have a need for 500+ devices on the one subnet. MS havent been known for...
Thanks for your thoughts - the FM114P does not do any LAN firewalling. Will try the 255.255.255 change ... not many ... been ... that ... other ... Netgear ...
How does one do a "factory reset"? ... From: Michael Pope To: NetgearMP101Group@yahoogroups.com Sent: Friday, September 16, 2005 11:14 PM Subject: RE:...
Oops, I should clarify, lest everyone think I'm a complete moron. I have an MP101 which no longer accepts input from the remote control. Is there a hardware...
1. There is a 'push pen tip in hole' on back to to reset. 2. I've done that (and used the remote) but can't do a firmware upgrade as it won't connect to the...
... Sorry I should have been more clear in that I thought it strange to be using a class B address range at home, given that a lot of consumer kit doesn't...
... The reset button on the back doesn't appear to achieve much more than pulling the plug on the thing, unless there is additional function (press and hold...
Wow, never saw that. Thanks! ... From: "gbuc1712" <sandyjbuck@...> To: <NetgearMP101Group@yahoogroups.com> Sent: Saturday, September 17, 2005 4:29 AM ...
Hi Wayne, Thanks for the info. I got this unit from someone else, so I'm not sure he was messing with the jumpers or not. He said it just stopped working after...
... I am not completely sure, all I know is that when I was playing with them to find out what they did I noticed that in any other position than the ones they...
I forgot to mention, take care when removing the front panel as the LCD attached to the bezel not the case and therefore unless you disconnect it first the...
Wayne, Thanks a lot for the tips. I had the unit apart once and saw where the IR board unplugs, but didn't know enough to go any further. I'll find some time ...
Although I no longer have MP101's, I was in an IM discussion recently, where a user said tech support had him unplug the unit, press and hold that reset button...
Gentlemen: If you have done a 'firmware' upgrade of the MP101, it is NEVER going to see the 'server'. The firmware is incorrect. And you are correct 'pushing'...
Gentlemen, Here is the story as i understand it, and it is keeping with what you know. There is probably nothing wrong with the hardware in the unit. The...
If you lose your remote control don't worry - Onforall 6 in one works. Not out of the box though - Here is the response i got from them: Thank you for your...
What's an RMA swap? _____ From: NetgearMP101Group@yahoogroups.com [mailto:NetgearMP101Group@yahoogroups.com] On Behalf Of nar14781478 Sent: 17 September 2005...
Are you trying to use the MP101 underneath or near a florescent light? Several of the remote controls for my office audio equipment do not work when the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
