Any advice given on NikonRepair@yahoogroups.com is used at your own risk. To avoid spam, new members are moderated. Apart from being merely a mail based list,...
NikonRepair@yahoogrou...
Jul 2, 2006 1:18 am
6499
Please PM me: wrs111445@... Thanks, Bill NikonRepair@yahoogroups.com wrote: Any advice given on NikonRepair@yahoogroups.com is used at your own risk. To...
Hi Bijesh, The problem might be related to linkage on the bottom side of the camera being bent or broken or maybe even just being stuck because of dirt and...
Hi Bijesh Take the bottom off and you will see a long link that "charges" the shutter. On this link there is a tab that is used as a stop to prevent this ...
I've been following this list for some years now, but this is my firts post - a cry for help. I've just bought an F3/MD4/AH3 combo from 'that auction site'....
Pete I have never worked on the MD4, however I have worked on the MD- 12,15,E. One area you should look at, are the camera pin contacts. I had one where one of...
Hi Pete, I think to remember that when the MD4 is connected to the F3, there is a switch being pressed that shuts off the in-camera batteries and provides ...
I was wanting to see if anyone had a junk F100 they would want to part with. Water damage, dropped, missing exterior parts- doesn't matter. Any leads would be...
Please PM me. Bill wrs111445@... ... Do you Yahoo!? Next-gen email? Have it all with the all-new Yahoo! Mail Beta. [Non-text portions of this message...
Hi I have a nikon afs 24-85G, which has accumulated dust behind the front element, although not detrimantal to the images, it is annoying knowing that it is...
Hi i've had this camera for awhile its an FG MF-15 in the back where you open to put the film the shutter that comes down is not there you have to pull it...
hi check that the batteries are fresh and see that the meter works. set the speed to "B" this sometimes resets it. Another area is the mirror foam which gets...
Hello, Could anybody help me to find (downlod) Repair Manual for D1 - VAA 10902 ? I am ready to buy it for reasonable price! Thank you all in advance!...
Hello All, I went to shoot my F3 the other day and the LCD for the meter was stuck on 80 after loading the film and advancing the film a few frames. I tried...
... I have some new info on the problem. I now realize that the meter starts to work normally at frame #11 on the counter. Not frame #1 like it should. The...
F3 LCD will stay at 80 if you are experiencing low power (replace batt) and film count is under 1. Another reason is if you have a TTL Flash on. It seems that...
... batt) and film count is under 1. Another reason is if you have a TTL Flash on. ... reason seems to be out of the question. Since you mentioned that you ...
After many years of faithful service; the back hook of my 601 broke off. Now my back cover won't latch (lock) onto the body. Luckily I still have the broken...
This is a common problem with that (and some other) models. I do not think any glue will be strong enough for that latch to hold, however. About 2 years ago,...
Any attempts at bonding these parts with normal glues or super glues will probably fail. However, there's a product called JB Weld, available at most...
Bill Forget the glue!! This baby is under a lot of stress. JB Weld and most epoxies are not too good on plastics. There is no glue obtainable to most humans...
Thanks everyone for your replies. Well if I try the glue route and the hook gets lost ... there's still the alternative method. I did find 2 kits on Ebay ......
They probably decided metal was the way to go (as I did) and made a simple hook piece. I think you could do this with a simple piece of aluminum. That is...
... simple hook piece. I think you could do this with a simple piece of aluminum. That is what I used...that and a hand file & hacksaw. As I said, it was...
I used a straight & flat piece of metal which I cut into sort of an L shape with a wide bottom part. Then I used the file to cut the bottom part of the L so...
Hi, The reason the f3 will not change from 80 might stem from the frame counter electrical contacts having a problem. Were you trying to use the camera on Auto...
Any advice given on NikonRepair@yahoogroups.com is used at your own risk. To avoid spam, new members are moderated. Apart from being merely a mail based list,...
NikonRepair@yahoogrou...
Aug 2, 2006 6:02 am
6527
Does anyone have one of these? Bill __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
