Not of lot of response ... Given that the 95% black value was much closer to 100 than to 90, I decided that my problem was I had set the default and thus the...
... Ferdinand, Those "L" values are a bit high for glossy, more like matte? Do you have the right K ink in? My glossy have been in the "7" to "9" range on...
Here are my Epson K2 Photo Black values on the first 21 step chart. You can see a couple of inversions in the L values. This is at 100%. This is where the...
Hi, I was wondering if any of you had an idea of what curve would work best with epson's water color radient white. I have a 2200 and am using the piezography...
I'm getting lower dmax than for matte, but if I push it too far (60%), QTR won't linearise, and if I back off part way (55%) I get the bumpy curves. 50% seems...
... That was the first 21 step curve at 100%. I just wanted you to see what the black looked like at unreduced flow. I set my limit at 55%, which gave me a...
I recently stocked up on MIS inks for my Epson 2400, planning to follow Paul Roark's recommendation of ABW mode with the MIS inkset (but EZ-Warm in the Y...
Hi all, I found a little bug in the Curve Creator Tool (Windows Version QTRGui 2.6.1.0). Let's say I select the Printing Model "Quad4000-A", and set the gray ...
Hello all, I have been using PrintFix PRO to make icc profiles for UT-3D inks on R200 printer. I am not completely happy with it, so I thought I'd try QTR for...
Changing the printing model resets things. - Stephen stephen.sbillard.org ... From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On Behalf...
Hi- Does anyone know if any QTR profiles for the Piezography Selenium MPS K7 with GLOP (gloss optimizer ink) are available yet? If so, for what Epson printers...
Help Please, I'm beginning to use the "Special edition" K6 inkset (from J. Cone) and QuadtoneRIP, with an Epson 1400, Photoshop CS3, and a Mac. The inkset is...
Howdy I have linearized what I believe is a well done profile, but when I print with the linearized profile...the print is darker than anticipated. I am able...
it sounds likeinks in the wrong order, best to contact support at InkjetMall. Tyler http://www.custom-digital.com/ ... and QuadtoneRIP, with an ... followed...
... into the Y ... Thank you Paul for your response. I have prepared QTR qidf files for HPR from your 3MK-Dmax-test through to re-linearizing using 67% and...
I solved my problem of wachy highlights. The problem was with the magenta cart supplied with my CIS. Continued head checks showed no ink pattern where the...
Hi Colin, I'd recommend you try the existing profile with just the ink positions changed and see if it works for you. ... It's probably unfortunate that my...
... positions ... Paul. That is what I did last of all and the L values I put in my email was from that curve. (Apologies for my senior moment - I meant ...
Make sure that your monitor is properly profiled as well. If it is, then print the 21 step scale with your linearized QTR profile and measure it to see if it...
Hi all...(I also posted this in the B&W group) I recently ungraded from Panther to Leopard and can't print at all with my Epson 2200. Not only does QTR not...
I don't know what's wrong, but something is... I'm using a 2200 and an R1800 with Leopard on an Intel Mac. QTR works with both printers, and the Epson driver...
Myron Gochnauer
goch@...
Aug 10, 2008 1:57 am
6905
Thanks so much for your suggestions, Myron...I had previously tried them all and nothing worked. I was able to get QTR to print a few times but the paper sizes...
Are you printing using an ICC print profile? i.e. in Photoshop Print page or with No Color Management. If you use NoCM then it will depend on what file...
Also you need to download the latest QTR version 2.6.1 for Leopard the previous versions do not work with Leopard. You need to re-install the printer too --...
Roy I am printing with NO Color Management. After I build the profile, and linearize it....I am finding that the highlights and shadows are no longer as...
This may be a really basic question, but I can not find anything on the web or within this group to find my answer. I am using an Epson 1800 printer, Windows...
Colin, ... OK, so you have my HPR profile with the ink positions altered to match your printer setup. To re-linearize the profile for your system, clear the ...
Hi Alan, I assume you're doing B&W prints. I haven't been doing QTR printing that long myself - but set your Color Profile (EDIT-> Color Settings) in PS3 to...
Thanks Roy...I do have the latest version and did delete the printer first. Prints have lots of verticle banding, where they didn't have any in Panther. I have...
... match your ... the ... not ... tabs in their ... profile that ... the L ... Paul Thanks for your help. I copied your qidf file, gave it a new name,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
